Hi all,
I want to create a bridge (see picture below) between 2 LANs with the same IP
range (192.168.0.0/24) using 2 wireless links that use load sharing over
multiple interfaces (as descibed here:
http://lartc.org/howto/lartc.loadshare.html) for load balancing and fault
tolerance. Both links should use IPsec for encryption.
I have googled for an example that does this but I could not find it.
Is this possible? Not in threory but in practise: has anyone done this? If so,
can anyone give me an example/pointer to an example of how to do this?
________ ________
| | | |
| ant1.1 |---| ant2.1 |
|________| |________|
_________ | | _________
| |-eth1-+ +--eth1-| |
lan1 --eth0-| bridge1 | | bridge2 |-eth0--lan2
|_________|-eth2-+ +--eth2-|_________|
____|___ ____|___
| | | |
| ant1.2 |---| ant2.2 |
|________| |________|
Groeten,
Joost Kraaijeveld
Askesis B.V.
Molukkenstraat 14
6524NB Nijmegen
tel: 024-3888063 / 06-51855277
fax: 024-3608416
e-mail: J.Kraaijeveld@Askesis.nl
web: www.askesis.nl
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
