hi:
*I have this 2 boxes set up like this:*
2020::2/128 2020::254/128
3030::254/128
192.168.0.2/24 192.168.0.254/24
192.168.30.254/24
+-------+ eth0 eth3 +-------+
| |=======================| | eth1
| A | | B |----
| | | |
+-------+ +-------+
A
*# ip r l*
192.168.30.254 dev eth0 scope link
192.168.0.0/24 dev eth0 scope link
169.254.0.0/16 dev lo scope link
127.0.0.0/8 dev lo scope link
*# ip -6 r l*
2020::254 dev eth0 metric 1024 mtu 1500 advmss 1440
3030::254 dev eth0 metric 1024 mtu 1500 advmss 1440
(...plus link local and multicast routes)
B
*# ip r l*
127.0.0.1 dev lo scope link
192.168.0.0/24 dev eth3 proto kernel scope link src 192.168.0.254
192.168.30.0/24 dev eth1 proto kernel scope link src 192.168.30.254
*# ip -6 r l*
2020::2 dev eth3 metric 1024 mtu 1500 advmss 1440 metric10 64
(...plus link local and multicast routes)
*# cat /proc/sys/net/ipv4/ip_forward*
1
*#cat /proc/sys/net/ipv6/conf/all/forwarding*
1
*The problem is that i can ping 192.168.30.254 from A, but i can''t ping
3030::254 from A, anyone has a clue why this happens? Is there any
feature i need to turn on or anything misconfigured? Why does it work
for IPv4 but not for IPv6? *
A -> B
*# ping 192.168.30.254*
PING 192.168.30.254 (192.168.30.254) 56(84) bytes of data.
64 bytes from 192.168.30.254: icmp_seq=0 ttl=64 time=0.175 ms
64 bytes from 192.168.30.254: icmp_seq=1 ttl=64 time=0.122 ms
*#ping6 3030::254*
PING 3030::254(3030::254) 56 data bytes
From ::1 icmp_seq=0 Destination unreachable: Address unreachable
From ::1 icmp_seq=1 Destination unreachable: Address unreachable
Regards
Filipe Abrantes
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
