I am running kernel 2.6.5, gentoo linux...julian''s routes-2.6.4-10
installed
eth0 = local
eth1 = cable modem
eth2 = T1
I am having issues with the machine actually sending packets out over
each hop, it tends to default to eth2, almost never will it use eth1-
I can make a rule to send traffic through the eth1 from certain hosts,
and it will force the IP through that interface, but general traffic is
defaulted through eth2
Also I have implemented a redundancy script (which pings each interface,
as listed in the docs) and it will not flag the down interface as
dead...any ideas?
# ip route show
67.106.221.0/29 dev eth2 proto kernel scope link src 67.106.221.4
10.1.10.0/24 dev eth0 proto kernel scope link src 10.1.10.239
24.98.192.0/22 dev eth1 proto kernel scope link src 24.98.192.221
127.0.0.0/8 via 127.0.0.1 dev lo scope link
default proto static
nexthop via 67.106.221.4 dev eth2 weight 1
nexthop via 24.98.192.221 dev eth1 weight 5
# ip rule show
0: from all lookup local
10: from all lookup main
100: from 10.1.10.0/16 lookup 100
32764: from 24.98.192.221 lookup T2
32765: from 67.106.221.4 lookup T1
32766: from all lookup main
32767: from all lookup default
#ip route get 66.218.71.114
66.218.71.114 dev eth2 src 67.106.221.4
cache mtu 1500 advmss 1460
every IP I try to get, goes through eth2....any ideas??
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
