Hi All, I am a newbie I have gone thru the archive for a couple of days now, and kind find postings that related to what am trying to do, I would appreciate it, if someone could help me with their sample script which I can tweak. My setup involves eth0 - Internet, eth1 - LAN I have 10 computers and 1 VoIP Telephone on the LAN, 256kb downlink/128kb uplink, and running Squid 2.5 STABLE 3 with NAT enabled I was told IMQ can hangle VoIP traffic properly, so wanted to try it out, how can I configure this properly so I always have clear voice quality, also I would like to divide the bandwidth such that each system gets 10kb downlink no matter what and 5kb uplink, while the telephone has 64kb downlink and 64kb uplink I believe the enabling NAT will effect the ingress and egress queues? On the squid, some applications connect to my squid port 3128, and establish up to 50 connections at a time, thus eating up the bandwidth, how can i restrict the connections to a limit of say 5 without drawing performance? Please any suggestions and sample scripts would be greatly appreciated, I have gone thru the document at docum.org, but still cant apply it properly. Thanks KC _________________________________________________________________ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/