I know what imq is. Everything is O.K. with download traffic. I need to
shape Upload traffic. But the problem is that u32 filter does not match
correct source address for forwarded packets - only gateway''s.
Bye,
Tadas
----- Original Message -----
From: "peyrak" <peyrak@seznam.cz>
To: "Tadas" <tadas-lartc@silvernet.kis.lt>
Sent: Sunday, April 27, 2003 11:51 AM
Subject: Re: [LARTC] Masquerade and tc filter
> imq
>
> ###########################
> # Jirka Pirko #
> # jirka@pirko.cz #
> # xpirko@fi.muni.cz #
> # cellular: +420608065259 #
> # icq uin: 136218111 #
> ###########################
> ----- Original Message -----
> From: "Tadas" <tadas-lartc@silvernet.kis.lt>
> To: <lartc@mailman.ds9a.nl>
> Sent: Sunday, April 27, 2003 8:43 AM
> Subject: [LARTC] Masquerade and tc filter
>
>
> > Hello,
> >
> > I am building a gateway/shaper. As always, there is a locl network
> > 192.168.3.0/24 and connection to internet. Gateway masquerades these
> > connections. I need to limit upload and download speed for certain
IPs.
> With
> > download traffic everything is ok: i have put filters on the local
netwrok> > interface. But I can''t set up filters by source address on
outgoing
> > traffic - the interface which makes masquerading. I have noticed that
all> > traffic have the same router source address set.
> >
> > So, what''s the solution? Maybe it is imposible? But I have
looked
through> > wondershaper and I saw that there are source address filters.
> >
> > Please give me a hint. I am using kernel 2.4.20.
> >
> > Bye,
> > Tadas
> >
> > _______________________________________________
> > LARTC mailing list / LARTC@mailman.ds9a.nl
> > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> >
>
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/