LARTC - Aug 2002 - Ingress polices

Hi list,
	I''m making BW control using filter police rate with ingress qdisc, it
work fine but i have few question:

	1. How to set different priorities for this filter, (I can dom it?), because if
I set different priority, the filters are multiplied.
	2. How I can combine different condition in only one filter, sharing the same
BW of course. For example: port 80 and port 3128
with the same police rate of 128 Kbit. (Again, I can do it?).

	The possible way is using classes and two interfaces, but the limitation is
that I control port (protocols) in one interface (eth0) and clients (BW max for
each) in other (eth1).

Thank in advance
Claudio Aznar
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

On Wednesday 07 August 2002 15:00, Claudio Aznar wrote:
> Hi list,
> 	I''m making BW control using filter police rate with ingress
qdisc, it work
> fine but i have few question:
>
> 	1. How to set different priorities for this filter, (I can dom it?),
> because if I set different priority, the filters are multiplied. 
There is only 1 filter, but there is a bug in the output of tc so the filter 
is printed more the once.
> 2. How I
> can combine different condition in only one filter, sharing the same BW of
> course. For example: port 80 and port 3128 with the same police rate of 128
> Kbit. (Again, I can do it?).
You can''t do it.  To do so, you will have to create a IMQ device,
redirect
all incoming traffic to it and use htb or cbq to create a hierarchical setup.

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/