LARTC - Jul 2001 - How to del the filter?

In order to delete a filter, the prio value is important . If I don''t
remember too bad , if you type

# tc filter del dev eth0 parent 1:0 prio 100

you should be done.
Bewary : all filters which match such description will be erased, regardless
of other parameters such fmark/u32/etc.

God Saves Tc


                    Jose,

----- Original Message -----
From: <macca@inwind.it>
To: <lartc@mailman.ds9a.nl>
Sent: Friday, July 13, 2001 3:48 PM
Subject: [LARTC] How to del the filter?

> I write the following istruction:
>
> #Attach CBQ to the root of the output device
> tc qdisc add dev eth0 root handle 1: cbq bandwidth 10Mbit cell 8 avpkt
1000 mpu 64
>
> #Class for the real-time traffic. Avpkt here doesn''t have the
default
value of 1000 because
> #realtime multimedia traffic is usually characterized by small packets \
> tc class add dev eth0 parent 1:0 classid 1:1 cbq \
> bandwidth 10Mbit rate 1Mbit avpkt 400 prio 1 bounded isolated \
> allot 1514 weight 1 maxburst 2
>
> #aggiungo il filtro guardando esempio howto Advanced Routing(2.4) pag 22
> tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip dst
192.168.1.2/32 flowid 1:1
>
> Now i don''t manage to del the filter.Someone can write me the
command
please.
> I wrote this istruction in the way that they were  similar with the sample
in the Avanced Howto 2.4. I don''t understand why it''s
different from the way
that someone can understand from the help of tc!!
> Thanks (and sorry for my english :-))
>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/2.4Routing/
>

I write the following istruction:

#Attach CBQ to the root of the output device
tc qdisc add dev eth0 root handle 1: cbq bandwidth 10Mbit cell 8 avpkt 1000 mpu
64
 
#Class for the real-time traffic. Avpkt here doesn''t have the default
value of 1000 because
#realtime multimedia traffic is usually characterized by small packets \
tc class add dev eth0 parent 1:0 classid 1:1 cbq \
bandwidth 10Mbit rate 1Mbit avpkt 400 prio 1 bounded isolated \
allot 1514 weight 1 maxburst 2
 
#aggiungo il filtro guardando esempio howto Advanced Routing(2.4) pag 22
tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip dst
192.168.1.2/32 flowid 1:1

Now i don''t manage to del the filter.Someone can write me the command
please.
I wrote this istruction in the way that they were  similar with the sample in
the Avanced Howto 2.4. I don''t understand why it''s different
from the way that someone can understand from the help of tc!!
Thanks (and sorry for my english :-))