Gluster users - Apr 2016 - replacing brick procedure

Are the steps for replacing a brick still current here?:


https://gluster.readthedocs.org/en/latest/Administrator%20Guide/Managing%20Volumes/#replace-faulty-brick

Do we still need to mount the volume, create/delete a director, set some
extended attributes?

Or can we just use the replace-brick cmd by itself?

-- 
Lindsay
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.gluster.org/pipermail/gluster-users/attachments/20160421/b1cf8829/attachment.html>

you don?t need to create a directory and set the extended attributes manually
anymore if you are using Gluster 3.7.x.
But the question is, why do you need the replace brick command if you are using
ZFS?!

?Bishoy
> On Apr 20, 2016, at 9:50 PM, Lindsay Mathieson <lindsay.mathieson at
gmail.com> wrote:
> 
> Are the steps for replacing a brick still current here?:
> 
>  
https://gluster.readthedocs.org/en/latest/Administrator%20Guide/Managing%20Volumes/#replace-faulty-brick
<https://gluster.readthedocs.org/en/latest/Administrator%20Guide/Managing%20Volumes/#replace-faulty-brick>
> 
> Do we still need to mount the volume, create/delete a director, set some
extended attributes?
> 
> Or can we just use the replace-brick cmd by itself?
> 
> -- 
> Lindsay
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.gluster.org/pipermail/gluster-users/attachments/20160420/e65a20fc/attachment.html>