Thank you for the advice. After re-compiling gluster with the xml option, I
was able to get geo-replication started!
Is this output normal? This is a 2x2 distributed/replicated volume:
> ]# gluster volume geo-rep shares gfs-a-bkp::bkpshares status
>
>
>> MASTER NODE MASTER VOL MASTER BRICK
>> SLAVE STATUS CHECKPOINT STATUS CRAWL
STATUS
>
>
>>
----------------------------------------------------------------------------------------------------------------------------------------------------
>
> gfs-a-2 shares
>> /mnt/a-2-shares-brick-1/brick gfs-a-bkp::bkpshares Active
N/A
>> Hybrid Crawl
>
> gfs-a-2 shares
>> /mnt/a-2-shares-brick-2/brick gfs-a-bkp::bkpshares Active
N/A
>> Hybrid Crawl
>
> gfs-a-2 shares
>> /mnt/a-2-shares-brick-3/brick gfs-a-bkp::bkpshares Active
N/A
>> Hybrid Crawl
>
> gfs-a-2 shares
>> /mnt/a-2-shares-brick-4/brick gfs-a-bkp::bkpshares Active
N/A
>> Hybrid Crawl
>
> gfs-a-3 shares
>> /mnt/a-3-shares-brick-1/brick gfs-a-bkp::bkpshares Passive
N/A
>> N/A
>
> gfs-a-3 shares
>> /mnt/a-3-shares-brick-2/brick gfs-a-bkp::bkpshares Passive
N/A
>> N/A
>
> gfs-a-3 shares
>> /mnt/a-3-shares-brick-3/brick gfs-a-bkp::bkpshares Passive
N/A
>> N/A
>
> gfs-a-3 shares
>> /mnt/a-3-shares-brick-4/brick gfs-a-bkp::bkpshares Passive
N/A
>> N/A
>
> gfs-a-4 shares
>> /mnt/a-4-shares-brick-1/brick gfs-a-bkp::bkpshares Passive
N/A
>> N/A
>
> gfs-a-4 shares
>> /mnt/a-4-shares-brick-2/brick gfs-a-bkp::bkpshares Passive
N/A
>> N/A
>
> gfs-a-4 shares
>> /mnt/a-4-shares-brick-3/brick gfs-a-bkp::bkpshares Passive
N/A
>> N/A
>
> gfs-a-4 shares
>> /mnt/a-4-shares-brick-4/brick gfs-a-bkp::bkpshares Passive
N/A
>> N/A
>
> gfs-a-1 shares
>> /mnt/a-1-shares-brick-1/brick gfs-a-bkp::bkpshares Active
N/A
>> Hybrid Crawl
>
> gfs-a-1 shares
>> /mnt/a-1-shares-brick-2/brick gfs-a-bkp::bkpshares Active
N/A
>> Hybrid Crawl
>
> gfs-a-1 shares
>> /mnt/a-1-shares-brick-3/brick gfs-a-bkp::bkpshares Active
N/A
>> Hybrid Crawl
>
> gfs-a-1 shares
>> /mnt/a-1-shares-brick-4/brick gfs-a-bkp::bkpshares Active
N/A
>> Hybrid Crawl
>
>
What I mean to say is, is it normal for two of the nodes to be in active
mode and two of the nodes to be in passive mode? I'm thinking the answer is
yes due to the distributed/replicated nature, but would like some
confirmation of that.
Cheers,
Dave
On Thu, Dec 11, 2014 at 12:19 PM, Aravinda <avishwan at redhat.com>
wrote:>
> Geo-replication depends on the xml output of Gluster Cli commands. For
> example, before connecting to slave nodes it gets the nodes list from both
> master and slave using gluster volume info and status commands with --xml.
>
> The Python tracebacks you are seeing in logs are due to inability to parse
> the output of gluster commands when xml is not supported.
>
> --
> regards
> Aravinda
> http://aravindavk.in
>
>
>
> On 12/11/2014 07:56 PM, David Gibbons wrote:
>
> Thanks for the feedback, answers inline below:
>
>
>> Have you followed all the upgrade steps w.r.t geo-rep
>> mentioned in the following link?
>>
>
> I didn't upgrade geo-rep, I disconnected the old replicated server and
> started from scratch. So everything with regard to geo-rep is
> fresh/brand-new.
>
>
>> 2. Does the output of command 'gluster vol info <vol-name>
--xml' proper ?
>> Please paste the output.
>>
>
> I do not have gluster compiled with xml. Perhaps that is the problem.
> Here is the output of the command you referenced:
>
>> XML output not supported. Ignoring '--xml' option
>>
>
> This is my config summary:
>
> GlusterFS configure summary
>> ==========================>> FUSE client : yes
>> Infiniband verbs : no
>> epoll IO multiplex : yes
>> argp-standalone : no
>> fusermount : yes
>> readline : no
>> georeplication : yes
>> Linux-AIO : no
>> Enable Debug : no
>> systemtap : no
>> Block Device xlator : no
>> glupy : no
>> Use syslog : yes
>> XML output : no
>> QEMU Block formats : no
>> Encryption xlator : no
>
>
> Am I missing something that is require for geo-replication? I've found
> the documentation for those of us who are building the binaries to be a bit
> lacking with regard to dependencies within the project.
>
> Cheers,
> Dave
>
>
>
> _______________________________________________
> Gluster-users mailing listGluster-users at
gluster.orghttp://supercolony.gluster.org/mailman/listinfo/gluster-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://supercolony.gluster.org/pipermail/gluster-users/attachments/20141214/2a0beac4/attachment.html>