Gluster users - Nov 2014 - snapshots fail on 3.6.1

I have a fresh install of gluster v3.6.1 on debian:
    # dpkg -l|grep gluster
    ii  glusterfs-client                   3.6.1-1
    ii  glusterfs-common                   3.6.1-1
    ii  glusterfs-server                   3.6.1-1

When I issue this command:
    # gluster snapshot create 20141125 testing

I get this error:
    snapshot create: failed: Cluster operating version is lesser than the
supported version for a snapshot
    Snapshot command failed

In fact, all gluster snapshot commands fail with the same error.

Here's the info on the volume:
    # gluster volume info testing

    Volume Name: testing
    Type: Distributed-Replicate
    Volume ID: 3ee751af-2160-432b-998c-e1b4742c0f20
    Status: Started
    Number of Bricks: 2 x 2 = 4
    Transport-type: tcp
    Bricks:
    Brick1: IP:/data/testing
    Brick2: IP:/data/testing
    Brick3: IP:/data/testing
    Brick4: IP:/data/testing

Can anyone give me some guidance?

Thanks much
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://supercolony.gluster.org/pipermail/gluster-users/attachments/20141125/fa52be50/attachment.html>

On 11/26/2014 01:07 AM, Kiebzak, Jason M. wrote:
> I have a fresh install of gluster v3.6.1 on debian:
>     # dpkg -l|grep gluster
>     ii  glusterfs-client                   3.6.1-1
>     ii  glusterfs-common                   3.6.1-1
>     ii  glusterfs-server                   3.6.1-1
> 
> When I issue this command:
>     # gluster snapshot create 20141125 testing
> 
> I get this error:
>     snapshot create: failed: Cluster operating version is lesser than the
supported version for a snapshot
>     Snapshot command failed
> 
> In fact, all gluster snapshot commands fail with the same error.
> 
> Here's the info on the volume:
>     # gluster volume info testing
> 
>     Volume Name: testing
>     Type: Distributed-Replicate
>     Volume ID: 3ee751af-2160-432b-998c-e1b4742c0f20
>     Status: Started
>     Number of Bricks: 2 x 2 = 4
>     Transport-type: tcp
>     Bricks:
>     Brick1: IP:/data/testing
>     Brick2: IP:/data/testing
>     Brick3: IP:/data/testing
>     Brick4: IP:/data/testing
> 
> Can anyone give me some guidance?
Is it a fresh install or you had your cluster running with older bits?
If you have upgraded the cluster from older version then you need to
manually bump up the op-version with the following command:

gluster volume set all cluster.op-version 30600

~Atin
> 
> Thanks much
> 
> 
> 
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>