thr3ads.net - Gluster users - [Gluster-users] Gluster reexport through NFS problem with FUSE [Nov 2008]

If this information is useful, please help other people find it:
Share via:

Martin Gumbau

2008-Nov-06 13:48 UTC

[Gluster-users] Gluster reexport through NFS problem with FUSE

Hi,
I don't obtain succesfully results to reexport NFS from Glusterfs.
With fuse kernel module that was in SuSE SLES 10 SP2 distribution the
glusterfs client mount ok.

I read README.NFS (from fuse-2.7.4 or fuse -2.7.3 or fuse-2.7.3glfs10)
as Avati said to me. Then I compile the fuse module with
--enable-kernel-module option (previus make clean).

The kernel 2.6.16.60-0.21-smp .config option
CONFIG_FUSE_FS=m

These are my files:
NFSSERVER - exports

/mnt/glusterfs *(no_subtree_check,async,no_auth_nlm,no_acl,rw,fsid=10)

GLUSTERFS - command line:

glusterfs --disable-io-mode=none -l/var/log/glusterfs/gfscli.log -LDEBUG
-f /etc/glusterfs/glusterfs-client.vol /mnt/glusterfs

LOGFILE - gfscli.log

2008-11-06 14:24:59 D [glusterfs.c:167:get_spec_fp] glusterfs: loading
spec from /etc/glusterfs/glusterfs-client.vol
2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for
'sirius00'
2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
load file /usr/local/lib/glusterfs/1.3.12/xlator/protocol/client.so
2008-11-06 14:24:59 D [spec.y:127:section_type] parser:
Type:sirius00:protocol/client
2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
Option:sirius00:transport-type:tcp/client
2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
Option:sirius00:remote-host:10.3.1.200
2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
Option:sirius00:remote-subvolume:brick
2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:sirius00
2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for
'sirius01'
2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
load file /usr/local/lib/glusterfs/1.3.12/xlator/protocol/client.so
2008-11-06 14:24:59 D [spec.y:127:section_type] parser:
Type:sirius01:protocol/client
2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
Option:sirius01:transport-type:tcp/client
2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
Option:sirius01:remote-host:10.3.1.201
2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
Option:sirius01:remote-subvolume:brick
2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:sirius01
2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for
'mirror0'
2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
load file /usr/local/lib/glusterfs/1.3.12/xlator/cluster/afr.so
2008-11-06 14:24:59 D [spec.y:127:section_type] parser:
Type:mirror0:cluster/afr
2008-11-06 14:24:59 D [spec.y:196:section_sub] parser:
child:mirror0->sirius00
2008-11-06 14:24:59 D [spec.y:196:section_sub] parser:
child:mirror0->sirius01
2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:mirror0
2008-11-06 14:24:59 D [glusterfs.c:128:fuse_graph] glusterfs: setting
option mount-point to /mnt/glusterfs
2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
load file /usr/local/lib/glusterfs/1.3.12/xlator/mount/fuse.so
2008-11-06 14:24:59 E [fuse-bridge.c:2699:init] glusterfs-fuse:
fuse_mount failed (No such file or directory)

2008-11-06 14:24:59 E [glusterfs.c:547:main] glusterfs: Initializing
FUSE failed




-- 
Martin Gumbau - mgumbau at iciq.es
Responsable Informatic
dels grups teorics
de Quimica Computacional
del ICIQ

Basavanagowda Kanur

2008-Nov-06 14:11 UTC

head link

[Gluster-users] Gluster reexport through NFS problem with FUSE

Martin,
   Please configure glusterfs build with '--enable-fuse-client'. You
need to
have fuse installed.

--
gowda

On Thu, Nov 6, 2008 at 7:18 PM, Martin Gumbau <mgumbau at iciq.es> wrote:
> Hi,
> I don't obtain succesfully results to reexport NFS from Glusterfs.
> With fuse kernel module that was in SuSE SLES 10 SP2 distribution the
> glusterfs client mount ok.
>
> I read README.NFS (from fuse-2.7.4 or fuse -2.7.3 or fuse-2.7.3glfs10)
> as Avati said to me. Then I compile the fuse module with
> --enable-kernel-module option (previus make clean).
>
> The kernel 2.6.16.60-0.21-smp .config option
> CONFIG_FUSE_FS=m
>
> These are my files:
> NFSSERVER - exports
>
> /mnt/glusterfs *(no_subtree_check,async,no_auth_nlm,no_acl,rw,fsid=10)
>
> GLUSTERFS - command line:
>
> glusterfs --disable-io-mode=none -l/var/log/glusterfs/gfscli.log -LDEBUG
> -f /etc/glusterfs/glusterfs-client.vol /mnt/glusterfs
>
> LOGFILE - gfscli.log
>
> 2008-11-06 14:24:59 D [glusterfs.c:167:get_spec_fp] glusterfs: loading
> spec from /etc/glusterfs/glusterfs-client.vol
> 2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for
> 'sirius00'
> 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
> load file /usr/local/lib/glusterfs/1.3.12/xlator/protocol/client.so
> 2008-11-06 14:24:59 D [spec.y:127:section_type] parser:
> Type:sirius00:protocol/client
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius00:transport-type:tcp/client
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius00:remote-host:10.3.1.200
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius00:remote-subvolume:brick
> 2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:sirius00
> 2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for
> 'sirius01'
> 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
> load file /usr/local/lib/glusterfs/1.3.12/xlator/protocol/client.so
> 2008-11-06 14:24:59 D [spec.y:127:section_type] parser:
> Type:sirius01:protocol/client
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius01:transport-type:tcp/client
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius01:remote-host:10.3.1.201
> 2008-11-06 14:24:59 D [spec.y:141:section_option] parser:
> Option:sirius01:remote-subvolume:brick
> 2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:sirius01
> 2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for
> 'mirror0'
> 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
> load file /usr/local/lib/glusterfs/1.3.12/xlator/cluster/afr.so
> 2008-11-06 14:24:59 D [spec.y:127:section_type] parser:
> Type:mirror0:cluster/afr
> 2008-11-06 14:24:59 D [spec.y:196:section_sub] parser:
> child:mirror0->sirius00
> 2008-11-06 14:24:59 D [spec.y:196:section_sub] parser:
> child:mirror0->sirius01
> 2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:mirror0
> 2008-11-06 14:24:59 D [glusterfs.c:128:fuse_graph] glusterfs: setting
> option mount-point to /mnt/glusterfs
> 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to
> load file /usr/local/lib/glusterfs/1.3.12/xlator/mount/fuse.so
> 2008-11-06 14:24:59 E [fuse-bridge.c:2699:init] glusterfs-fuse:
> fuse_mount failed (No such file or directory)
>
> 2008-11-06 14:24:59 E [glusterfs.c:547:main] glusterfs: Initializing
> FUSE failed
>
>
>
>
> --
> Martin Gumbau - mgumbau at iciq.es
> Responsable Informatic
> dels grups teorics
> de Quimica Computacional
> del ICIQ
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
>


-- 
hard work often pays off after time, but laziness always pays off now
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://supercolony.gluster.org/pipermail/gluster-users/attachments/20081106/168adb3b/attachment.html>

Basavanagowda Kanur

2008-Nov-06 14:24 UTC

head link

[Gluster-users] Fwd: Gluster reexport through NFS problem with FUSE

forwarding to list

---------- Forwarded message ----------
From: Basavanagowda Kanur <gowda at zresearch.com>
Date: Thu, Nov 6, 2008 at 7:53 PM
Subject: Re: [Gluster-users] Gluster reexport through NFS problem with FUSE
To: Martin Gumbau <mgumbau at iciq.es>


Check if the directory on which you are trying to mount exists.

Check if there is a stale mount on the directory on which you are trying to
mount.


On Thu, Nov 6, 2008 at 7:51 PM, Martin Gumbau <mgumbau at iciq.es> wrote:
> Yes, is loaded
> $ lsmod
>
> Module                  Size  Used by
> fuse                   64432  0
> ...
>
> On Thu, 2008-11-06 at 15:13 +0100, Basavanagowda Kanur wrote:
> > Sorry.. you already have glusterfs built with fuse client.
> >
> > Check if you have loaded fuse kernel module.
> >
> > --
> > gowda
> >
> > On Thu, Nov 6, 2008 at 7:41 PM, Basavanagowda Kanur
> > <gowda at zresearch.com> wrote:
> >         Martin,
> >            Please configure glusterfs build with
> >         '--enable-fuse-client'. You need to have fuse
installed.
> >
> >         --
> >         gowda
> >
> >
> >
> >         On Thu, Nov 6, 2008 at 7:18 PM, Martin Gumbau
> >         <mgumbau at iciq.es> wrote:
> >                 Hi,
> >                 I don't obtain succesfully results to reexport NFS
> >                 from Glusterfs.
> >                 With fuse kernel module that was in SuSE SLES 10 SP2
> >                 distribution the
> >                 glusterfs client mount ok.
> >
> >                 I read README.NFS (from fuse-2.7.4 or fuse -2.7.3 or
> >                 fuse-2.7.3glfs10)
> >                 as Avati said to me. Then I compile the fuse module
> >                 with
> >                 --enable-kernel-module option (previus make clean).
> >
> >                 The kernel 2.6.16.60-0.21-smp .config option
> >                 CONFIG_FUSE_FS=m
> >
> >                 These are my files:
> >                 NFSSERVER - exports
> >
> >                 /mnt/glusterfs
> >                
*(no_subtree_check,async,no_auth_nlm,no_acl,rw,fsid=10)
> >
> >                 GLUSTERFS - command line:
> >
> >                 glusterfs --disable-io-mode=none
> >                 -l/var/log/glusterfs/gfscli.log -LDEBUG
> >                 -f /etc/glusterfs/glusterfs-client.vol /mnt/glusterfs
> >
> >                 LOGFILE - gfscli.log
> >
> >                 2008-11-06 14:24:59 D [glusterfs.c:167:get_spec_fp]
> >                 glusterfs: loading
> >                 spec from /etc/glusterfs/glusterfs-client.vol
> >                 2008-11-06 14:24:59 D [spec.y:107:new_section] parser:
> >                 New node for
> >                 'sirius00'
> >                 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type]
> >                 xlator: attempt to
> >                 load
> >                 file
> /usr/local/lib/glusterfs/1.3.12/xlator/protocol/client.so
> >                 2008-11-06 14:24:59 D [spec.y:127:section_type]
> >                 parser:
> >                 Type:sirius00:protocol/client
> >                 2008-11-06 14:24:59 D [spec.y:141:section_option]
> >                 parser:
> >                 Option:sirius00:transport-type:tcp/client
> >                 2008-11-06 14:24:59 D [spec.y:141:section_option]
> >                 parser:
> >                 Option:sirius00:remote-host:10.3.1.200
> >                 2008-11-06 14:24:59 D [spec.y:141:section_option]
> >                 parser:
> >                 Option:sirius00:remote-subvolume:brick
> >                 2008-11-06 14:24:59 D [spec.y:209:section_end] parser:
> >                 end:sirius00
> >                 2008-11-06 14:24:59 D [spec.y:107:new_section] parser:
> >                 New node for
> >                 'sirius01'
> >                 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type]
> >                 xlator: attempt to
> >                 load
> >                 file
> /usr/local/lib/glusterfs/1.3.12/xlator/protocol/client.so
> >                 2008-11-06 14:24:59 D [spec.y:127:section_type]
> >                 parser:
> >                 Type:sirius01:protocol/client
> >                 2008-11-06 14:24:59 D [spec.y:141:section_option]
> >                 parser:
> >                 Option:sirius01:transport-type:tcp/client
> >                 2008-11-06 14:24:59 D [spec.y:141:section_option]
> >                 parser:
> >                 Option:sirius01:remote-host:10.3.1.201
> >                 2008-11-06 14:24:59 D [spec.y:141:section_option]
> >                 parser:
> >                 Option:sirius01:remote-subvolume:brick
> >                 2008-11-06 14:24:59 D [spec.y:209:section_end] parser:
> >                 end:sirius01
> >                 2008-11-06 14:24:59 D [spec.y:107:new_section] parser:
> >                 New node for
> >                 'mirror0'
> >                 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type]
> >                 xlator: attempt to
> >                 load
> >                 file
> /usr/local/lib/glusterfs/1.3.12/xlator/cluster/afr.so
> >                 2008-11-06 14:24:59 D [spec.y:127:section_type]
> >                 parser:
> >                 Type:mirror0:cluster/afr
> >                 2008-11-06 14:24:59 D [spec.y:196:section_sub] parser:
> >                 child:mirror0->sirius00
> >                 2008-11-06 14:24:59 D [spec.y:196:section_sub] parser:
> >                 child:mirror0->sirius01
> >                 2008-11-06 14:24:59 D [spec.y:209:section_end] parser:
> >                 end:mirror0
> >                 2008-11-06 14:24:59 D [glusterfs.c:128:fuse_graph]
> >                 glusterfs: setting
> >                 option mount-point to /mnt/glusterfs
> >                 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type]
> >                 xlator: attempt to
> >                 load
> >                 file
/usr/local/lib/glusterfs/1.3.12/xlator/mount/fuse.so
> >                 2008-11-06 14:24:59 E [fuse-bridge.c:2699:init]
> >                 glusterfs-fuse:
> >                 fuse_mount failed (No such file or directory)
> >
> >                 2008-11-06 14:24:59 E [glusterfs.c:547:main]
> >                 glusterfs: Initializing
> >                 FUSE failed
> >
> >
> >
> >
> >                 --
> >                 Martin Gumbau - mgumbau at iciq.es
> >                 Responsable Informatic
> >                 dels grups teorics
> >                 de Quimica Computacional
> >                 del ICIQ
> >
> >
> >                 _______________________________________________
> >                 Gluster-users mailing list
> >                 Gluster-users at gluster.org
> >
> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
> >
> >
> >
> >
> >         --
> >         hard work often pays off after time, but laziness always pays
> >         off now
> >
> >
> >
> > --
> > hard work often pays off after time, but laziness always pays off now
> --
> Martin Gumbau - mgumbau at iciq.es
> Responsable Informatic
> dels grups teorics
> de Quimica Computacional
> del ICIQ
>
>

-- 
hard work often pays off after time, but laziness always pays off now



-- 
hard work often pays off after time, but laziness always pays off now
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://supercolony.gluster.org/pipermail/gluster-users/attachments/20081106/7514c9e2/attachment.html>

Gluster users - Nov 2008 - Gluster reexport through NFS problem with FUSE

[Gluster-users] Gluster reexport through NFS problem with FUSE

[Gluster-users] Gluster reexport through NFS problem with FUSE

[Gluster-users] Fwd: Gluster reexport through NFS problem with FUSE