At 03:46 PM 05/04/2006, Markus Trippelsdorf wrote:>smartd stopped working here after I cvsuped to the latest 6.1 pre-release:
>
>?smartd[4109]: Device: /dev/ad4, not ATA, no IDENTIFY DEVICE Structure?
Same here on 2 different chipsets. However,
rebuilding smartmontools seems to fix it!
[gp-kit1]# smartctl -a /dev/ad0
smartctl version 5.33 [i386-portbld-freebsd6.0]
Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Failed command: : Inappropriate ioctl for device
Failed command: : Inappropriate ioctl for device
Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)
A mandatory SMART command failed: exiting. To
continue, add one or more '-T permissive' options.
[gp-kit1]#
atapci0: <Intel ICH6 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
And then rebuilding it, I get
[gp-kit1]# smartctl -a /dev/ad0
smartctl version 5.33 [i386-portbld-freebsd6.1]
Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ==Device Model: ST340014A
Serial Number: 4JV2P2Z7
Firmware Version: 8.54
User Capacity: 40,020,664,320 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Wed Apr 5 15:59:49 2006 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ==SMART overall-health self-assessment test
result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto
Offline Data Collection: Disabled.
Self-test execution status: ( 0) The
previous self-test routine completed
without
error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto
Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 31) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST
THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 062 058 006
Pre-fail Always - 57585514
3
Spin_Up_Time 0x0003 099 098 000
Pre-fail Always - 0
4
Start_Stop_Count 0x0032 100 100 020
Old_age Always - 0
5
Reallocated_Sector_Ct 0x0033 100 100 036
Pre-fail Always - 0
7
Seek_Error_Rate 0x000f 086 060 030
Pre-fail Always - 442185414
9
Power_On_Hours 0x0032 092 092 000
Old_age Always - 7397
10
Spin_Retry_Count 0x0013 100 100 097
Pre-fail Always - 0
12
Power_Cycle_Count 0x0032 100 100 020
Old_age Always - 16
194
Temperature_Celsius 0x0022 033 045 000
Old_age Always - 33
195
Hardware_ECC_Recovered 0x001a 062 058 000
Old_age Always - 57585514
197
Current_Pending_Sector 0x0012 100 100 000
Old_age Always - 0
198
Offline_Uncorrectable 0x0010 100 100 000
Old_age Offline - 0
199
UDMA_CRC_Error_Count 0x003e 200 200 000
Old_age Always - 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000
Old_age Offline - 0
202
TA_Increase_Count 0x0032 100 253 000
Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status
Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5073 -
# 2 Short offline Completed without error 00% 5049 -
# 3 Short offline Completed without error 00% 5026 -
# 4 Short offline Completed without error 00% 5002 -
# 5 Short offline Completed without error 00% 4980 -
# 6 Short offline Completed without error 00% 4979 -
# 7 Short offline Completed without error 00% 4955 -
# 8 Short offline Completed without error 00% 4931 -
# 9 Short offline Completed without error 00% 4908 -
#10 Short offline Completed without error 00% 4884 -
#11 Short offline Completed without error 00% 4861 -
#12 Short offline Completed without error 00% 4837 -
#13 Short offline Completed without error 00% 4814 -
#14 Short offline Completed without error 00% 4813 -
#15 Short offline Completed without error 00% 4790 -
#16 Short offline Completed without error 00% 4766 -
#17 Short offline Completed without error 00% 4743 -
#18 Short offline Completed without error 00% 4719 -
#19 Short offline Completed without error 00% 4696 -
#20 Short offline Completed without error 00% 4672 -
#21 Short offline Completed without error 00% 4649 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.