On Thu, 02 Feb 2006 22:22:12 +0100, Ronald Klop
<ronald-freebsd8@klop.yi.org> wrote:
> Hello,
>
> When I boot my laptop with a wi0 pccard inserted, the machine locks
> after probing wi0. I can't go to the debugger also.
> The fun thing is, that it probes if I also inserted my ep0 card before
> booting. But if I than remove both and only reinsert the wi0 it hangs
> again. Suspend-resume gives the same hang.
>
> In 5.x (I think 5.3) it worked ok. So I think there is some regression
> in this driver.
>
> I am not working on my laptop now, so I don't have a dmesg available,
> but I will make one later if needed.
> This problem is there since I started using 6.x and that is from 6.0-RC
> until 6.0-STABLE (last week).
>
> Do more people have this problem? And what info can I give to help
> debugging this problem?
>
> Ronald.
Here's my dmesg and kernel config (attached). I hope somebody has an idea
about this.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #3: Mon Jan 30 02:17:26 CET 2006
root@laptop.klop.ws:/usr/obj/usr/src/sys/LAPTOP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (266.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 100622336 (95 MB)
avail memory = 93097984 (88 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 0.1 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at
device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at
device 12.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
isab0: <PCI-ISA bridge> at device 14.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f at device 14.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0x44080000-0x44080fff irq 11 at
device 14.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
ubt0: SiW SiW, rev 1.10/15.00, addr 2
ubt0: SiW SiW, rev 1.10/15.00, addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3;
wMaxPacketSize=49; nframes=6, buffer size=294
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
disabled, default to accept, logging unlimited
ep0: <3Com Megahertz 589E> at port 0x100-0x10f irq 11 function 0 config 1
on pccard0
ep0: Ethernet address: 00:50:da:d1:01:25
wi0: < IEEE 802.11 Wireless LAN/PC Card> at port 0x180-0x1bf irq 11
function 0 config 1 on pccard1
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
wi0: Intersil Firmware: Primary (0.3.0), Station (0.8.3)
wi0: Ethernet address: 00:60:b3:71:86:1c
ad0: 9590MB <FUJITSU MHN2100AT 7256> at ata0-master PIO4
acd0: CDROM <CD-224E/9.0B> at ata0-slave PIO4
Trying to mount root from ufs:/dev/ad0s1a
--
Ronald Klop
Amsterdam, The Netherlands
-------------- next part --------------
A non-text attachment was scrubbed...
Name: LAPTOP
Type: application/octet-stream
Size: 2876 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060203/bc16d761/LAPTOP.obj