hi all:
I just installed FreeBSD 5.3R on Dell PE 2850,and cvsuped the
src,build my own SMP kernel(HTT on), then builded the
kernel(SCHED_ULE),got this 5.4-STABLE FreeBSD 5.4-STABLE #0 system.
After i installed mysql-client-4.0.24_1,and i run
/usr/local/bin/mysql_install_db to initialize mysql, it unresponsive!
Ctrl+C not worked,
#uname -a
FreeBSD ibsd.xxx.com 5.4-STABLE FreeBSD 5.4-STABLE #0: Tue Apr 12
10:34:52 CST 2005 root@ibsd.xxx.com:/usr/obj/usr/src/sys/DSMP i386
My kernel configfile and /var/run/dmesg.boot were attached.
But when i turned off the HTT, /usr/local/bin/mysql_install_db runed
successfully. After i had configed the mysql,and turn HTT on again,
mysql worked right.
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Tue Apr 12 10:34:52 CST 2005
root@ibsd.xxx.com:/usr/obj/usr/src/sys/DSMP
ACPI APIC Table: <DELL PE BKC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.20-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 3220963328 (3071 MB)
avail memory = 3154829312 (3008 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 10
ioapic2: WARNING: intbase 64 != expected base 56
ioapic3: Changing APIC ID to 11
ioapic3: WARNING: intbase 96 != expected base 88
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
ioapic3 <Version 2.0> irqs 96-119 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE BKC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem
0xdfee0000-0xdfeeffff,0xdfef0000-0xdfefffff irq 34 at device 5.0 on pci2
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xe800-0xe8ff mem
0xdfec0000-0xdfecffff,0xdfed0000-0xdfedffff irq 33 at device 5.1 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xdcc0-0xdcff mem 0xdfbe0000-0xdfbfffff irq 64 at device 7.0 on pci6
em0: Ethernet address: 00:11:43:e0:31:db
em0: Speed:N/A Duplex:N/A
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xccc0-0xccff mem 0xdf9e0000-0xdf9fffff irq 65 at device 8.0 on pci7
em1: Ethernet address: 00:11:43:e0:31:dc
em1: Speed:N/A Duplex:N/A
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8
pci10: <ACPI PCI bus> on pcib10
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci11: <unknown> at device 5.0 (no driver attached)
pci11: <unknown> at device 5.1 (no driver attached)
pci11: <unknown> at device 5.2 (no driver attached)
atapci0: <SiI 0680 UDMA133 controller> port
0xbc70-0xbc7f,0xbcd0-0xbcd3,0xbcd8-0xbcdf,0xbce4-0xbce7,0xbcf0-0xbcf7 irq 23 at
device 6.0 on pci11
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
pci11: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem
0xec000-0xeffff,0xd4000-0xd4fff,0xcc000-0xcffff,0xcb000-0xcbfff,0xc0000-0xcafff
on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 10.000 msec
acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master PIO4
ata2-master: FAILURE - SETFEATURES SET TRANSFER MODE
status=41<READY,ERROR> error=4<ABORTED>
ata2-slave: FAILURE - SETFEATURES SET TRANSFER MODE status=41<READY,ERROR>
error=4<ABORTED>
acd1: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave BIOSPIO
Waiting 2 seconds for SCSI devices to settle
ses0 at mpt0 bus 0 target 6 lun 0
ses0: <PE/PV 1x6 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at mpt0 bus 0 target 0 lun 0
da0: <SEAGATE ST373207LC D701> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <SEAGATE ST373207LC D701> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da1: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
pid 38: corrected slot count (0->1)
Mounting root from ufs:/dev/da0s2a
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSMP
Type: application/octet-stream
Size: 4394 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20050412/82aa1463/DSMP.obj
Kris Kennaway
2005-Apr-12 00:04 UTC
[RELENG_5] Unresponsive system using ULE+HTT with 2 Xeon
On Tue, Apr 12, 2005 at 02:21:33PM +0800, N ;-) wrote:> hi all: > I just installed FreeBSD 5.3R on Dell PE 2850,and cvsuped the > src,build my own SMP kernel(HTT on), then builded the > kernel(SCHED_ULE),got this 5.4-STABLE FreeBSD 5.4-STABLE #0 system.ULE is known to still have bugs, so don't use it if you want a stable system. Kris -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20050412/8a537940/attachment.bin