Aaron Summers
2005-Apr-11 19:12 UTC
SuperMicro X5DP8-G2MB/(2)XEON 2.4/1GB RAM 5.4-S Freeze
Greetings,
We have a SuperMicro X5DP8-G2 Motherboard, 2xXEON 2.4, 1GB RAM server
running 5.4-STABLE that keeps freezing up. We have replaced RAM, HD,
SCSI controller, etc. To no avail. We are running SMP GENERIC
Kernel. I cannot get the system to panic, leave a core dump, etc. It
just always freezes. The server functions as a web server in a
HSphere Cluster. I am about out of options besides loading 4.11
(since our 4 series servers never die). Any help, feedback, clues,
similar experiences, etc would be greatly appreciated.
On SCSI: The onboard Adaptec 7902 gives a dump on bootup but appears
to work. I read the archived post about this issue. The system still
locked up with an Adaptec 7982B that did not give this message.
DMESG:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #2: Sat Apr 9 09:16:44 EST 2005
root@unix17:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073217536 (1023 MB)
avail memory = 1040605184 (992 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
cpu1: <ACPI CPU (2 Cx states)> on acpi0
cpu2: <ACPI CPU (2 Cx states)> on acpi0
cpu3: <ACPI CPU (2 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no
driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pci1: <base peripheral, interrupt controller> at device 30.0 (no
driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0x3000-0x303f mem 0xfc200000-0xfc21ffff irq 28 at device 2.0 on pci3
em0: Ethernet address: 00:30:48:2d:0a:2c
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0x3040-0x307f mem 0xfc220000-0xfc23ffff irq 29 at device 2.1 on pci3
em1: Ethernet address: 00:30:48:2d:0a:2d
em1: Speed:N/A Duplex:N/A
pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <base peripheral, interrupt controller> at device 28.0 (no
driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pci4: <base peripheral, interrupt controller> at device 30.0 (no
driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 31.0 on pci4
pci6: <ACPI PCI bus> on pcib6
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x4000-0x40ff,0x4400-0x44ff mem 0xfc400000-0xfc401fff irq 76 at device
2.0 on pci6
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x4800-0x48ff,0x4c00-0x4cff mem 0xfc402000-0xfc403fff irq 77 at device
2.1 on pci6
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
0x2000-0x201f irq 16 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
0x2020-0x203f irq 19 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
0x2040-0x205f irq 18 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port
0x2060-0x206f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem
0xe0000-0xe3fff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDROM <CD-224E/1.9A> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
ahd0: Invalid Sequencer interrupt occurred.>>>>>>>>>>>>>>>>>> Dump
Card State Begins
<<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x23b Mode 0x0
Card was paused
INTSTAT[0x0] SELOID[0x2] SELID[0x40] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0]
SEQINTCTL[0x6]:(INTMASK1|INTMASK2)
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x4]
KERNEL_QFREEZE_COUNT[0x4] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xb NEXTSCB 0xff40
qinstart = 46 qinfifonext = 47
QINFIFO: 0x9
WAITING_TID_QUEUES:
Pending list:
9 FIFO_USE[0x0] SCB_CONTROL[0x48]:(STATUS_RCVD|DISCENB) SCB_SCSIID[0x27]
Total 1
Kernel Free SCB list: 11 13 15 1 2 3 4 5 6 7 8 10 12 14 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xd
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x9
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0xd 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
ahd0: REG0 == 0xac95, SINDEX = 0x10e, DINDEX = 0x106
ahd0: SCBPTR == 0xd, SCB_NEXT == 0xff40, SCB_NEXT2 == 0xff8d
CDB 12 20 0 80 88 53
STACK: 0x236 0x2 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card
State Ends
>>>>>>>>>>>>>>>>>>
ses0 at ahd0 bus 0 target 6 lun 0
ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0
0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0
0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0
0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
da2 at ahd0 bus 0 target 4 lun 0
da2: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device
da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da2: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da0 at ahd0 bus 0 target 0 lun 0
da0: <SEAGATE ST336754LC 0002> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da1 at ahd0 bus 0 target 2 lun 0
da1: <SEAGATE ST336754LC 0002> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/da0s1a
--
Aaron Summers
aaronsummers@gmail.com
http://insight.ath.cx
Sven Willenberger
2005-Apr-11 19:37 UTC
SuperMicro X5DP8-G2MB/(2)XEON 2.4/1GB RAM 5.4-S Freeze
Aaron Summers presumably uttered the following on 04/11/05 22:12:> Greetings, > > We have a SuperMicro X5DP8-G2 Motherboard, 2xXEON 2.4, 1GB RAM server > running 5.4-STABLE that keeps freezing up. We have replaced RAM, HD, > SCSI controller, etc. To no avail. We are running SMP GENERIC > Kernel. I cannot get the system to panic, leave a core dump, etc. It > just always freezes. The server functions as a web server in a > HSphere Cluster. I am about out of options besides loading 4.11 > (since our 4 series servers never die). Any help, feedback, clues, > similar experiences, etc would be greatly appreciated. > > On SCSI: The onboard Adaptec 7902 gives a dump on bootup but appears > to work. I read the archived post about this issue. The system still > locked up with an Adaptec 7982B that did not give this message. > > DMESG: ><snip>> da2 at ahd0 bus 0 target 4 lun 0 > da2: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device > da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged > Queueing Enabled > da2: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) > da0 at ahd0 bus 0 target 0 lun 0 > da0: <SEAGATE ST336754LC 0002> Fixed Direct Access SCSI-3 device > da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged > Queueing Enabled > da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) > da1 at ahd0 bus 0 target 2 lun 0 > da1: <SEAGATE ST336754LC 0002> Fixed Direct Access SCSI-3 device > da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged > Queueing Enabled > da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) > Mounting root from ufs:/dev/da0s1a >We had many issues with Seagate drives and and S/M boards with the onboard Adaptec scsi controllers. Seagate offered no help other than to suggest putting in a network card (in lieu of the onboard) and/or disabling SMP; neither solution was acceptable so we switched to IBM/Hitachi drives and the problems disappeared. By the way, the problems manifested themselves in those servers where we had more than just one hard drive installed. This was even after updating to the latest firmware etc; Seagate insists no problem with their drives although other drives work perfectly well. YMMV I do see you say you tried other harddrives .. which ones did you use? Sven
Carlos Horowicz
2005-Apr-11 21:49 UTC
SuperMicro X5DP8-G2MB/(2)XEON 2.4/1GB RAM 5.4-S Freeze
Hi, I had exactly the same issue with a X5DPR-iG2+ Supermicro motherboard, but solved it after just disabling Power Mgmt and Hyperthreading in the BIOS. In my case, it had nothing to do with the FreeBSD version or kernel , the machine was freezing couple of times a week during months with different 4.x and 5.x stable versions. -Carlos ----- Original Message ----- From: "Aaron Summers" <aaronsummers@gmail.com> To: <stable@freebsd.org> Sent: Monday, April 11, 2005 11:12 PM Subject: SuperMicro X5DP8-G2MB/(2)XEON 2.4/1GB RAM 5.4-S Freeze> Greetings, > > We have a SuperMicro X5DP8-G2 Motherboard, 2xXEON 2.4, 1GB RAM server > running 5.4-STABLE that keeps freezing up. We have replaced RAM, HD, > SCSI controller, etc. To no avail. We are running SMP GENERIC > Kernel. I cannot get the system to panic, leave a core dump, etc. It > just always freezes. The server functions as a web server in a > HSphere Cluster. I am about out of options besides loading 4.11 > (since our 4 series servers never die). Any help, feedback, clues, > similar experiences, etc would be greatly appreciated. > > On SCSI: The onboard Adaptec 7902 gives a dump on bootup but appears > to work. I read the archived post about this issue. The system still > locked up with an Adaptec 7982B that did not give this message. > > DMESG: > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-STABLE #2: Sat Apr 9 09:16:44 EST 2005 > root@unix17:/usr/obj/usr/src/sys/SMP > ACPI APIC Table: <PTLTD APIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 1073217536 (1023 MB) > avail memory = 1040605184 (992 MB) > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 6 > cpu3 (AP): APIC ID: 7 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > ioapic2 <Version 2.0> irqs 48-71 on motherboard > ioapic3 <Version 2.0> irqs 72-95 on motherboard > ioapic4 <Version 2.0> irqs 96-119 on motherboard > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <PTLTD RSDT> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: <ACPI CPU (2 Cx states)> on acpi0 > cpu1: <ACPI CPU (2 Cx states)> on acpi0 > cpu2: <ACPI CPU (2 Cx states)> on acpi0 > cpu3: <ACPI CPU (2 Cx states)> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <unknown> at device 0.1 (no driver attached) > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <base peripheral, interrupt controller> at device 28.0 (no > driver attached) > pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1 > pci2: <ACPI PCI bus> on pcib2 > pci1: <base peripheral, interrupt controller> at device 30.0 (no > driver attached) > pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1 > pci3: <ACPI PCI bus> on pcib3 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0x3000-0x303f mem 0xfc200000-0xfc21ffff irq 28 at device 2.0 on pci3 > em0: Ethernet address: 00:30:48:2d:0a:2c > em0: Speed:N/A Duplex:N/A > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0x3040-0x307f mem 0xfc220000-0xfc23ffff irq 29 at device 2.1 on pci3 > em1: Ethernet address: 00:30:48:2d:0a:2d > em1: Speed:N/A Duplex:N/A > pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pci4: <base peripheral, interrupt controller> at device 28.0 (no > driver attached) > pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci4 > pci5: <ACPI PCI bus> on pcib5 > pci4: <base peripheral, interrupt controller> at device 30.0 (no > driver attached) > pcib6: <ACPI PCI-PCI bridge> at device 31.0 on pci4 > pci6: <ACPI PCI bus> on pcib6 > ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port > 0x4000-0x40ff,0x4400-0x44ff mem 0xfc400000-0xfc401fff irq 76 at device > 2.0 on pci6 > aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs > ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port > 0x4800-0x48ff,0x4c00-0x4cff mem 0xfc402000-0xfc403fff irq 77 at device > 2.1 on pci6 > aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs > uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port > 0x2000-0x201f irq 16 at device 29.0 on pci0 > usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port > 0x2020-0x203f irq 19 at device 29.1 on pci0 > usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port > 0x2040-0x205f irq 18 at device 29.2 on pci0 > usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci7: <ACPI PCI bus> on pcib7 > pci7: <display, VGA> at device 1.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH3 UDMA100 controller> port > 0x2060-0x206f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on > pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on > acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > orm0: <ISA Option ROMs> at iomem > 0xe0000-0xe3fff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 10.000 msec > acd0: CDROM <CD-224E/1.9A> at ata0-master PIO4 > Waiting 15 seconds for SCSI devices to settle > ahd0: Invalid Sequencer interrupt occurred. >>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< > ahd0: Dumping Card State at program address 0x23b Mode 0x0 > Card was paused > INTSTAT[0x0] SELOID[0x2] SELID[0x40] HS_MAILBOX[0x0] > INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] > DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) > SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] > LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] > SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] > SEQINTCTL[0x6]:(INTMASK1|INTMASK2) > SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x4] > KERNEL_QFREEZE_COUNT[0x4] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] > SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] > SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] > LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] > LQOSTAT2[0x0] > > SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xb NEXTSCB 0xff40 > qinstart = 46 qinfifonext = 47 > QINFIFO: 0x9 > WAITING_TID_QUEUES: > Pending list: > 9 FIFO_USE[0x0] SCB_CONTROL[0x48]:(STATUS_RCVD|DISCENB) SCB_SCSIID[0x27] > Total 1 > Kernel Free SCB list: 11 13 15 1 2 3 4 5 6 7 8 10 12 14 0 > Sequencer Complete DMA-inprog list: > Sequencer Complete list: > Sequencer DMA-Up and Complete list: > Sequencer On QFreeze and Complete list: > > > ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xd > SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) > SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) > SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) > > ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x9 > SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) > SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) > SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) > LQIN: 0x8 0x0 0x0 0xd 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 0x0 0x0 > ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 > ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 > ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 > > SIMODE0[0xc]:(ENOVERRUN|ENIOERR) > CCSCBCTL[0x4]:(CCSCBDIR) > ahd0: REG0 == 0xac95, SINDEX = 0x10e, DINDEX = 0x106 > ahd0: SCBPTR == 0xd, SCB_NEXT == 0xff40, SCB_NEXT2 == 0xff8d > CDB 12 20 0 80 88 53 > STACK: 0x236 0x2 0x0 0x0 0x0 0x0 0x0 0x0 > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> > ses0 at ahd0 bus 0 target 6 lun 0 > ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device > ses0: 3.300MB/s transfers > ses0: SAF-TE Compliant Device > Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 > 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 > Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 > 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 > Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 > 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 > SMP: AP CPU #2 Launched! > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > da2 at ahd0 bus 0 target 4 lun 0 > da2: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device > da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged > Queueing Enabled > da2: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) > da0 at ahd0 bus 0 target 0 lun 0 > da0: <SEAGATE ST336754LC 0002> Fixed Direct Access SCSI-3 device > da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged > Queueing Enabled > da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) > da1 at ahd0 bus 0 target 2 lun 0 > da1: <SEAGATE ST336754LC 0002> Fixed Direct Access SCSI-3 device > da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged > Queueing Enabled > da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) > Mounting root from ufs:/dev/da0s1a > > -- > Aaron Summers > aaronsummers@gmail.com > http://insight.ath.cx > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
On Mon, Apr 11, 2005 at 10:12:32PM -0400, Aaron Summers wrote:> We have a SuperMicro X5DP8-G2 Motherboard, 2xXEON 2.4, 1GB RAM server > running 5.4-STABLE that keeps freezing up. We have replaced RAM, HD, > SCSI controller, etc. To no avail. We are running SMP GENERIC > Kernel. I cannot get the system to panic, leave a core dump, etc. It > just always freezes. The server functions as a web server in a > HSphere Cluster. I am about out of options besides loading 4.11 > (since our 4 series servers never die). Any help, feedback, clues, > similar experiences, etc would be greatly appreciated. > > On SCSI: The onboard Adaptec 7902 gives a dump on bootup but appears > to work. I read the archived post about this issue. The system still > locked up with an Adaptec 7982B that did not give this message.We've got exactly the same, but then with the X5DPR-IG2+/X5DPR-8G2+. I've got about 25-30 running FreeBSD 4.6 - 4.11 running perfectly stable, but the 3 that I installed 5.x on, (currently all 5.4-STABLE), keep on hanging themselves up completely, even with no read load on them, within a week. CPUs range from 3.06 to 3.2 GHz, all of them have 4x1GB DIMMs, and 3 SEAGATE ST3146807LC 0007's... I tried updating the BIOSes as well, with both a standard BIOS and one given to us bh supermicro preconfigured fro com-console, so I could flashed them with a remotely booted DOS floppy over com-console. :-) Another thing I noticed: motherboard versions from before 2005 do not detect sio0 on the right place: port 0x2f8-0x2ff irq 3 on acpi0 (the normal place for sio1), resulting in loader/kernel comconsole going to the right port and the userland comconsole going to the wrong port... This problem does not occur on newer versions of the servers... Marc -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20050412/6d433d0c/attachment.bin
From: Marc Olzheim> On Mon, Apr 11, 2005 at 10:12:32PM -0400, Aaron Summers wrote: > > We have a SuperMicro X5DP8-G2 Motherboard, 2xXEON 2.4, 1GB > RAM server > > running 5.4-STABLE that keeps freezing up. We have > replaced RAM, HD, > > SCSI controller, etc. To no avail. We are running SMP GENERIC > > Kernel. I cannot get the system to panic, leave a core > dump, etc. It > > just always freezes. The server functions as a web server in a > > HSphere Cluster. I am about out of options besides loading 4.11 > > (since our 4 series servers never die). Any help, feedback, clues, > > similar experiences, etc would be greatly appreciated. > > > > On SCSI: The onboard Adaptec 7902 gives a dump on bootup > but appears > > to work. I read the archived post about this issue. The > system still > > locked up with an Adaptec 7982B that did not give this message. >The problem is with the periodic SMM interrupt and the bios. The attached program (ich-periodic-smm-disable.c) will fix the problem. For more information on what it does, see the Intel ICH3 datasheet. compile as 'gcc ich-periodic-smm-disable.c; ./a.out' and you will be good. Run this on each boot. I think you only need to clear PERIODIC_EN. --don -------------- next part -------------- A non-text attachment was scrubbed... Name: ich-periodic-smm-disable.c Type: application/octet-stream Size: 3994 bytes Desc: ich-periodic-smm-disable.c Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20050412/f6d714e2/ich-periodic-smm-disable.obj