Hi,
I am not able to write audio cd in session at once mode.
Cdrecord reports that the writer supports this mode (SAO, TAO, PACKET,
SAO/R96R, RAW/R96R).
The error message, after [cdrecord -v gracetime=2 dev=1,0,0 speed=1 -dao
-dummy -eject -pa d -audio *.wav] is:
Cdrecord 2.00.3 (i386-unknown-freebsd5.1) Copyright (C) 1995-2002 J?rg
Schilling
...
Starting to write CD/DVD at speed 1 in dummy SAO mode for single session.
Last chance to quit, starting dummy write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 3 of 42 MB written (fifo 92%) [buf 84%] 106.9x.cdrecord:
Input/ output error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 06 54 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 0 0 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 200s
write track data: error after 3810240 bytes
Sense Bytes: 70 00 02 00 00 00 00 12 00 00 00 00 04 08 00 00 00 00
Writing time: 7.627s
Average write speed 595.0x.
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 185.205s timeout 200s
Trouble flushing the cache
Fixating time: 185.208s
cdrecord: fifo had 124 puts and 61 gets.
cdrecord: fifo was 0 times empty and 7 times full, min fill was 89%.
cdrdao has the same result. On cdrdao's homepage it is written that it
should work fine with crx-140e firmware 1.0n, so I downgraded my
firmware from 1.0s to 1.0n, but in vain.
The writer works well under Windows using Nero.
At first sight I thought it was a bug in cam, but when I tried burncd
via atapi dev [ burncd -f /dev/acd0 -d -t -v audio *.wav]:
...
CUE sheet:
...
burncd: ioctl(CDRIOCSENDCUE): Input/output error
It gave the same result.
Any idea?
Thanks in advance, Laci
---------------------------------------------------------------------------------------------------------------------
FreeBSD ip-167-78.tvnetwork.hu 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #9:
Fri Feb 27 15:58:27 CET 2004
root@ip-167-78.tvnetwork.hu:/usr/obj/usr/src/sys/LCustom i386