Wow excellent feedback Joseph, Philon and Aki, You have all pointed me in the right direction. Tonight I have tested Dovecot with just the minor configs I do for Dovecot setup and I have commented out the mbox/Maildir lines in 10-mail.conf from my testing: #mail_location #mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u #mail_location = maildir:~/Maildir I had run up some test files (folders) under mbox using "/u/home/user/mail_test" and then renamed this to 'mail' (so /u/home/user/mail). Ran some tests with sends/receives, created folders - all good. Created mbox text folders. Then had my initial test 'Maildir_test' populated with test folders which I renamed to /u/home/user/Maildir - and each time I restarted Outlook it was obeying the folder 'format' based on whether I had 'mail' or 'Maildir' in place. I did see in the posts and docs on-line somewhere that someone mentioned the later implementations of Dovecot, without hard-setting either mbox or Maildir in the 10-mail.conf file, Dovecot, based on the presence of the particular directory in the user's $HOME directory obeys the rules based on mbox/Maildir respectively. I haven't needed to touch the namespace rules as per: https://wiki2.dovecot.org/Namespaces so the only files that bear any changes from the installed config in conf.d are: -rw-r--r-- 1 root root 14531 Oct 8 23:28 10-mail.conf -rw-r--r-- 1 root root 2965 Oct 7 08:49 10-master.conf -rw-r--r-- 1 root root 1728 Oct 7 08:52 10-ssl.conf This will make migration so much easier with converting one user at a time and then getting them to start Outlook and re-sync things again. This will save a massive job from being just that and can be done in batches of users to suit time constraints. I will post here once again to let you all know how I fare but just proves to me over and over again the power of the Linux e-mail server with Dovecot for IMAP and being able to keep with the older SendMail MTA (been working with Sendmail since 1996 so....). Thank you all so much for taking time to respond. On 08/10/17 20:32, Aki Tuomi wrote:> You can give mail location and home directory from userdb or passdb. > > For userdb, return mail=something:~/something and for home use home=/path/to/home > > For passdb, you can return userdb_mail and userdb_home > > Aki > >> On October 8, 2017 at 1:14 PM Philon <bytesplit at gmail.com> wrote: >> >> >> Hi David, >> >> I somehow remember that there is a way to get the mail_location from per-user-settings. I had this once when migrating from maildir to mdbox. >> >> You might want to use Google and the mailing list archives for the details but in summary it went like this: >> >> - set Dovecot to grab the mail_location from user-settings (I think we used MySQL db field - or check docs for auto:) >> - have login script which converts maildir from setup A to B and update the user setting >> - kick the user once again to apply the setting (I?m not sure about this) >> >> This then automates the conversion process to happen on next user login. >> >> Be warned though that today with all the idle phones, probably many users will re-login after you restart the server. Perhaps the scripting could handle a timer which randomizes this a little. >> >> >> Philon >> >> >>> Am 07.10.2017 um 02:22 schrieb David.M.Clark <david at davrom.com>: >>> >>> Hi All, >>> >>> Thanks to MJ for the suggestion as my only hope, and I have tested this with Outlook 2016 and Thunderbird today - seamless creation of folders. >>> >>> Now the mammoth task of converting customers with masses of mbox folders to MailDir format using the on-line perl script: mb2md-3.20.pl >>> >>> Works nicely and will be what gets us out of trouble. My only sadness is that Outlook then has to be 're-subscribed' to the folders again.... which makes sense or maybe I didn't give it long enough - its IMAP folder syncs are extremely slow compared to Thunderbird which I also tested in parallel. Thunderbird didn't need any re-sync, it just found the new subscription setup and was ready to go. But in all fairness, Outlook is still really only an Exchange compatible product for the most part. >>> >>> Would be great to run both mbox and MailDir at the same time so we can do the slow user-by-user process rather than having them all down at some point completely - might look at running Dovecot on a different port maybe with a different ".conf" but thinking this may not work anyway or cause issues.... back to my server tests to see :-) >>> >>> I use additional ports to 143 for external IMAP restrictions anyway so might be able to do this method somehow. >>> >>> Anyway, for those interested in where I got to in my testing so far... >>> >>> 1. Download perl script "mb2md-3.20.pl" from: >>> >>> http://batleth.sapienti-sat.org/projects/mb2md >>> >>> 2. Changed Dovecot /etc/dovecot/conf.d/10-mail.conf mbox entry to MailDir: >>> >>> #mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u >>> mail_location = maildir:~/Maildir >>> >>> 3. Restarted Dovecot >>> >>> 4. su as user and in their home (/u/home/user on my setup): >>> >>> /u/packages/mb2md-3.20.pl -m >>> >>> then: >>> >>> mv mail mail_old >>> >>> then: >>> >>> /u/packages/mb2md-3.20.pl -s mail_old -R >>> >>> then: >>> >>> Login with Outlook and subscribe to IMAP folders again. >>> >>> Not a big fan of gazillions of little eml based text mail files in directories but hey, if it fixes our issues, maybe I need to stop wambulancing about it all and do as I am told :-) >>> >>> Hope this helps - will keep this e-mail updated on findings if anything else comes to light.-- As always, I remain at your service. Kindest Regards, David.M.Clark (Director - Senior Linux/UNIX Consultant) =-------------------------------------------------------------------------- Davrom Consulting Pty Ltd Mobile: 0418763124 PO Box 1644, Sunnybank Hills, 4109 E-mail (Work): david at davrom.com ABN: 81 096 990 804 E-mail (Priv): dmc1961 at dmc1961.id.au Website: http://davrom.com Skype: dmc1961 Podcast: http://ldup.com.au Google: dmc1961 at gmail.com =-------------------------------------------------------------------------- Specialising in: Linux (Fedora/RedHat/CentOS), UNIX, SCO, MikroTik, Networking/Internet, E-mail/Web Technologies =-------------------------------------------------------------------------- Please note: Any e-mail communication bearing this signature is for the exclusive purpose of the sender and is not for publication without the expressed permission of the sender or respective sender's organisation. =--------------------------------------------------------------------------=
David.M.Clark
2017-Oct-09 01:02 UTC
My sub-folder with Outlook work-around to date - update 201710091046
Hi All, Will start using an "update" tag in my subject just to not cause confusion (mainly for yours truly). Pursuant to my victory in finding Maildir and mbox being used if either exist (and if both still seems to favour Maildir - a mistake my end: "rmdir -f mail" fixed it), I have found one issue with not declaring the mailbox location: it won't import your new e-mail from your Inbox (/var/spool/mail/user in my case). If I run the conversion script mb2md with a '-m', I get duplicate entries in Outlook's Inbox - I understand why, just a shame it doesn't sync with what 'isn't' already there. So yesterday and today I have done additional testing as the customer uses RoundCube and mobile devices - so attacking the same Linux server I have Thunderbird and a couple of Android e-mail clients. Outlook is the only stick in the mud with needing to manually subscribe to folders when I create them on other devices - again could be me as I don't use Outlook. (Thunderbird and other e-mail clients, all good with immediate auto-sync). I looked at the wiki to try and run both mail_location settings with the wiki suggested: ##namespace { ## separator = / ## prefix = "#mbox/" ## location = mbox:~/mail:INBOX=/var/mail/%u ## inbox = yes ## hidden = yes ## list = no ##} ##namespace { ## separator = / ## prefix = "Maildir/" ## location = maildir:~/Maildir ## list = yes ##} in 10-mail.conf but as you can see, I have commented it out now as it introduced some more layers of errors which I have to get back to - "Duplicate namespace prefix" was one issue. The goal is to run the server with the existing mbox users blissfully unaware they are being converted one-by-one so it looks like I 'can' run both formats but just need to get the configs right. Was hoping the mb2md would just sync new stuff so I could cron script the Inbox check for the users that are converted to Maildir until I can throw the switch and be done with the cut-over..... or I could be dangerous and remove and import each time.... but that could lead to more dramas at the user end. Looks like more R&D is needed so will persevere - annoying to get so close though, might see if I can just sync in the Inbox items that are 'new' - that means I am ready to roll on the customer site...... On 09/10/17 00:12, David.M.Clark wrote:> Wow excellent feedback Joseph, Philon and Aki, > > You have all pointed me in the right direction. Tonight I have tested > Dovecot with just the minor configs I do for Dovecot setup and I have > commented out the mbox/Maildir lines in 10-mail.conf from my testing: > > #mail_location > #mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u > #mail_location = maildir:~/Maildir > > I had run up some test files (folders) under mbox using > "/u/home/user/mail_test" and then renamed this to 'mail' (so > /u/home/user/mail). > Ran some tests with sends/receives, created folders - all good. Created > mbox text folders. > > Then had my initial test 'Maildir_test' populated with test folders > which I renamed to /u/home/user/Maildir - and each time I restarted > Outlook it was obeying the folder 'format' based on whether I had 'mail' > or 'Maildir' in place. > > I did see in the posts and docs on-line somewhere that someone mentioned > the later implementations of Dovecot, without hard-setting either mbox > or Maildir in the 10-mail.conf file, Dovecot, based on the presence of > the particular directory in the user's $HOME directory obeys the rules > based on mbox/Maildir respectively. > > I haven't needed to touch the namespace rules as per: > > https://wiki2.dovecot.org/Namespaces > > so the only files that bear any changes from the installed config in > conf.d are: > > -rw-r--r-- 1 root root 14531 Oct? 8 23:28 10-mail.conf > -rw-r--r-- 1 root root? 2965 Oct? 7 08:49 10-master.conf > -rw-r--r-- 1 root root? 1728 Oct? 7 08:52 10-ssl.conf > > This will make migration so much easier with converting one user at a > time and then getting them to start Outlook and re-sync things again. > > This will save a massive job from being just that and can be done in > batches of users to suit time constraints. > > I will post here once again to let you all know how I fare but just > proves to me over and over again the power of the Linux e-mail server > with Dovecot for IMAP and being able to keep with the older SendMail MTA > (been working with Sendmail since 1996 so....). > > Thank you all so much for taking time to respond. > > On 08/10/17 20:32, Aki Tuomi wrote: >> You can give mail location and home directory from userdb or passdb. >> >> For userdb, return mail=something:~/something and for home use >> home=/path/to/home >> >> For passdb, you can return userdb_mail and userdb_home >> >> Aki >> >>> On October 8, 2017 at 1:14 PM Philon <bytesplit at gmail.com> wrote: >>> >>> >>> Hi David, >>> >>> I somehow remember that there is a way to get the mail_location from >>> per-user-settings. I had this once when migrating from maildir to mdbox. >>> >>> You might want to use Google and the mailing list archives for the >>> details but in summary it went like this: >>> >>> - set Dovecot to grab the mail_location from user-settings (I think >>> we used MySQL db field - or check docs for auto:) >>> - have login script which converts maildir from setup A to B and >>> update the user setting >>> - kick the user once again to apply the setting (I?m not sure about >>> this) >>> >>> This then automates the conversion process to happen on next user login. >>> >>> Be warned though that today with all the idle phones, probably many >>> users will re-login after you restart the server. Perhaps the >>> scripting could handle a timer which randomizes this a little. >>> >>> >>> Philon >>> >>> >>>> Am 07.10.2017 um 02:22 schrieb David.M.Clark <david at davrom.com>: >>>> >>>> Hi All, >>>> >>>> Thanks to MJ for the suggestion as my only hope, and I have tested >>>> this with Outlook 2016 and Thunderbird today - seamless creation of >>>> folders. >>>> >>>> Now the mammoth task of converting customers with masses of mbox >>>> folders to MailDir format using the on-line perl script: mb2md-3.20.pl >>>> >>>> Works nicely and will be what gets us out of trouble. My only >>>> sadness is that Outlook then has to be 're-subscribed' to the >>>> folders again.... which makes sense or maybe I didn't give it long >>>> enough - its IMAP folder syncs are extremely slow compared to >>>> Thunderbird which I also tested in parallel. Thunderbird didn't need >>>> any re-sync, it just found the new subscription setup and was ready >>>> to go. But in all fairness, Outlook is still really only an Exchange >>>> compatible product for the most part. >>>> >>>> Would be great to run both mbox and MailDir at the same time so we >>>> can do the slow user-by-user process rather than having them all >>>> down at some point completely - might look at running Dovecot on a >>>> different port maybe with a different ".conf" but thinking this may >>>> not work anyway or cause issues.... back to my server tests to see :-) >>>> >>>> I use additional ports to 143 for external IMAP restrictions anyway >>>> so might be able to do this method somehow. >>>> >>>> Anyway, for those interested in where I got to in my testing so far... >>>> >>>> 1. Download perl script "mb2md-3.20.pl" from: >>>> >>>> http://batleth.sapienti-sat.org/projects/mb2md >>>> >>>> 2. Changed Dovecot /etc/dovecot/conf.d/10-mail.conf mbox entry to >>>> MailDir: >>>> >>>> #mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u >>>> mail_location = maildir:~/Maildir >>>> >>>> 3. Restarted Dovecot >>>> >>>> 4. su as user and in their home (/u/home/user on my setup): >>>> >>>> /u/packages/mb2md-3.20.pl -m >>>> >>>> then: >>>> >>>> mv mail mail_old >>>> >>>> then: >>>> >>>> /u/packages/mb2md-3.20.pl -s mail_old -R >>>> >>>> then: >>>> >>>> Login with Outlook and subscribe to IMAP folders again. >>>> >>>> Not a big fan of gazillions of little eml based text mail files in >>>> directories but hey, if it fixes our issues, maybe I need to stop >>>> wambulancing about it all and do as I am told :-) >>>> >>>> Hope this helps - will keep this e-mail updated on findings if >>>> anything else comes to light. >-- As always, I remain at your service. Kindest Regards, David.M.Clark (Director - Senior Linux/UNIX Consultant) =-------------------------------------------------------------------------- Davrom Consulting Pty Ltd Mobile: 0418763124 PO Box 1644, Sunnybank Hills, 4109 E-mail (Work): david at davrom.com ABN: 81 096 990 804 E-mail (Priv): dmc1961 at dmc1961.id.au Website: http://davrom.com Skype: dmc1961 Podcast: http://ldup.com.au Google: dmc1961 at gmail.com =-------------------------------------------------------------------------- Specialising in: Linux (Fedora/RedHat/CentOS), UNIX, SCO, MikroTik, Networking/Internet, E-mail/Web Technologies =-------------------------------------------------------------------------- Please note: Any e-mail communication bearing this signature is for the exclusive purpose of the sender and is not for publication without the expressed permission of the sender or respective sender's organisation. =--------------------------------------------------------------------------=
David.M.Clark
2017-Oct-09 04:23 UTC
My sub-folder with Outlook work-around to date - update 201710091046
Hi Mike, I haven't seen your messages come through the feed so something is not working for your e-mail address there? No I am not using Sieve - the server has a third party handling spam etc so the Linux box is very basic SendMail, Dovecot and RoundCube setup (along with my own procmail based web interface for e-mail forwarding and away message responses). I struggle on. On 09/10/17 12:30, Mike wrote:> > Mr. Clark, > > I would post this question to the maillist, but for some unknown reason, > it will not post my messages. > > Are you currently using Sieve with your mbox setup? > > If so, would you be willing to share your configuration of that? > > If not, I guess I'll just convert to maildir like you are doing. > > I'd be willing to help in any way you feel needed. > > Thanks. > > Mike Barsalou > > Quoting "David.M.Clark" <david at davrom.com>: > >> Hi All, >> >> Will start using an "update" tag in my subject just to not cause >> confusion (mainly for yours truly). >> >> Pursuant to my victory in finding Maildir and mbox being used if >> either exist (and if both still seems to favour Maildir - a mistake my >> end: "rmdir -f mail" fixed it), I have found one issue with not >> declaring the mailbox location: it won't import your new e-mail from >> your Inbox (/var/spool/mail/user in my case). If I run the conversion >> script mb2md with a '-m', I get duplicate entries in Outlook's Inbox - >> I understand why, just a shame it doesn't sync with what 'isn't' >> already there. >> >> So yesterday and today I have done additional testing as the customer >> uses RoundCube and mobile devices - so attacking the same Linux server >> I have Thunderbird and a couple of Android e-mail clients. Outlook is >> the only stick in the mud with needing to manually subscribe to >> folders when I create them on other devices - again could be me as I >> don't use Outlook. (Thunderbird and other e-mail clients, all good >> with immediate auto-sync). >> >> I looked at the wiki to try and run both mail_location settings with >> the wiki suggested: >> >> ##namespace { >> ##? separator = / >> ##? prefix = "#mbox/" >> ##? location = mbox:~/mail:INBOX=/var/mail/%u >> ##? inbox = yes >> ##? hidden = yes >> ##? list = no >> ##} >> ##namespace { >> ##? separator = / >> ##? prefix = "Maildir/" >> ##? location = maildir:~/Maildir >> ##? list = yes >> ##} >> >> in 10-mail.conf but as you can see, I have commented it out now as it >> introduced some more layers of errors which I have to get back to - >> "Duplicate namespace prefix" was one issue. >> >> The goal is to run the server with the existing mbox users blissfully >> unaware they are being converted one-by-one so it looks like I 'can' >> run both formats but just need to get the configs right. Was hoping >> the mb2md would just sync new stuff so I could cron script the Inbox >> check for the users that are converted to Maildir until I can throw >> the switch and be done with the cut-over..... or I could be dangerous >> and remove and import each time.... but that could lead to more dramas >> at the user end. >> >> Looks like more R&D is needed so will persevere - annoying to get so >> close though, might see if I can just sync in the Inbox items that are >> 'new' - that means I am ready to roll on the customer site...... >> >> On 09/10/17 00:12, David.M.Clark wrote: >>> Wow excellent feedback Joseph, Philon and Aki, >>> >>> You have all pointed me in the right direction. Tonight I have tested >>> Dovecot with just the minor configs I do for Dovecot setup and I have >>> commented out the mbox/Maildir lines in 10-mail.conf from my testing: >>> >>> #mail_location >>> #mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u >>> #mail_location = maildir:~/Maildir >>> >>> I had run up some test files (folders) under mbox using >>> "/u/home/user/mail_test" and then renamed this to 'mail' (so >>> /u/home/user/mail). >>> Ran some tests with sends/receives, created folders - all good. >>> Created mbox text folders. >>> >>> Then had my initial test 'Maildir_test' populated with test folders >>> which I renamed to /u/home/user/Maildir - and each time I restarted >>> Outlook it was obeying the folder 'format' based on whether I had >>> 'mail' or 'Maildir' in place. >>> >>> I did see in the posts and docs on-line somewhere that someone >>> mentioned the later implementations of Dovecot, without hard-setting >>> either mbox or Maildir in the 10-mail.conf file, Dovecot, based on >>> the presence of the particular directory in the user's $HOME >>> directory obeys the rules based on mbox/Maildir respectively. >>> >>> I haven't needed to touch the namespace rules as per: >>> >>> https://wiki2.dovecot.org/Namespaces >>> >>> so the only files that bear any changes from the installed config in >>> conf.d are: >>> >>> -rw-r--r-- 1 root root 14531 Oct? 8 23:28 10-mail.conf >>> -rw-r--r-- 1 root root? 2965 Oct? 7 08:49 10-master.conf >>> -rw-r--r-- 1 root root? 1728 Oct? 7 08:52 10-ssl.conf >>> >>> This will make migration so much easier with converting one user at a >>> time and then getting them to start Outlook and re-sync things again. >>> >>> This will save a massive job from being just that and can be done in >>> batches of users to suit time constraints. >>> >>> I will post here once again to let you all know how I fare but just >>> proves to me over and over again the power of the Linux e-mail server >>> with Dovecot for IMAP and being able to keep with the older SendMail >>> MTA (been working with Sendmail since 1996 so....). >>> >>> Thank you all so much for taking time to respond. >>> >>> On 08/10/17 20:32, Aki Tuomi wrote: >>>> You can give mail location and home directory from userdb or passdb. >>>> >>>> For userdb, return mail=something:~/something and for home use >>>> home=/path/to/home >>>> >>>> For passdb, you can return userdb_mail and userdb_home >>>> >>>> Aki >>>> >>>>> On October 8, 2017 at 1:14 PM Philon <bytesplit at gmail.com> wrote: >>>>> >>>>> >>>>> Hi David, >>>>> >>>>> I somehow remember that there is a way to get the mail_location >>>>> from per-user-settings. I had this once when migrating from maildir >>>>> to mdbox. >>>>> >>>>> You might want to use Google and the mailing list archives for the >>>>> details but in summary it went like this: >>>>> >>>>> - set Dovecot to grab the mail_location from user-settings (I think >>>>> we used MySQL db field - or check docs for auto:) >>>>> - have login script which converts maildir from setup A to B and >>>>> update the user setting >>>>> - kick the user once again to apply the setting (I?m not sure about >>>>> this) >>>>> >>>>> This then automates the conversion process to happen on next user >>>>> login. >>>>> >>>>> Be warned though that today with all the idle phones, probably many >>>>> users will re-login after you restart the server. Perhaps the >>>>> scripting could handle a timer which randomizes this a little. >>>>> >>>>> >>>>> Philon >>>>> >>>>> >>>>>> Am 07.10.2017 um 02:22 schrieb David.M.Clark <david at davrom.com>: >>>>>> >>>>>> Hi All, >>>>>> >>>>>> Thanks to MJ for the suggestion as my only hope, and I have tested >>>>>> this with Outlook 2016 and Thunderbird today - seamless creation >>>>>> of folders. >>>>>> >>>>>> Now the mammoth task of converting customers with masses of mbox >>>>>> folders to MailDir format using the on-line perl script: >>>>>> mb2md-3.20.pl >>>>>> >>>>>> Works nicely and will be what gets us out of trouble. My only >>>>>> sadness is that Outlook then has to be 're-subscribed' to the >>>>>> folders again.... which makes sense or maybe I didn't give it long >>>>>> enough - its IMAP folder syncs are extremely slow compared to >>>>>> Thunderbird which I also tested in parallel. Thunderbird didn't >>>>>> need any re-sync, it just found the new subscription setup and was >>>>>> ready to go. But in all fairness, Outlook is still really only an >>>>>> Exchange compatible product for the most part. >>>>>> >>>>>> Would be great to run both mbox and MailDir at the same time so we >>>>>> can do the slow user-by-user process rather than having them all >>>>>> down at some point completely - might look at running Dovecot on a >>>>>> different port maybe with a different ".conf" but thinking this >>>>>> may not work anyway or cause issues.... back to my server tests to >>>>>> see :-) >>>>>> >>>>>> I use additional ports to 143 for external IMAP restrictions >>>>>> anyway so might be able to do this method somehow. >>>>>> >>>>>> Anyway, for those interested in where I got to in my testing so >>>>>> far... >>>>>> >>>>>> 1. Download perl script "mb2md-3.20.pl" from: >>>>>> >>>>>> http://batleth.sapienti-sat.org/projects/mb2md >>>>>> >>>>>> 2. Changed Dovecot /etc/dovecot/conf.d/10-mail.conf mbox entry to >>>>>> MailDir: >>>>>> >>>>>> #mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u >>>>>> mail_location = maildir:~/Maildir >>>>>> >>>>>> 3. Restarted Dovecot >>>>>> >>>>>> 4. su as user and in their home (/u/home/user on my setup): >>>>>> >>>>>> /u/packages/mb2md-3.20.pl -m >>>>>> >>>>>> then: >>>>>> >>>>>> mv mail mail_old >>>>>> >>>>>> then: >>>>>> >>>>>> /u/packages/mb2md-3.20.pl -s mail_old -R >>>>>> >>>>>> then: >>>>>> >>>>>> Login with Outlook and subscribe to IMAP folders again. >>>>>> >>>>>> Not a big fan of gazillions of little eml based text mail files in >>>>>> directories but hey, if it fixes our issues, maybe I need to stop >>>>>> wambulancing about it all and do as I am told :-) >>>>>> >>>>>> Hope this helps - will keep this e-mail updated on findings if >>>>>> anything else comes to light. >>> >> >> -- >> >> As always, I remain at your service. >> >> Kindest Regards, >> David.M.Clark (Director - Senior Linux/UNIX Consultant) >> =--------------------------------------------------------------------------= >> >> ?Davrom Consulting Pty Ltd??????????? Mobile: 0418763124 >> ?PO Box 1644, Sunnybank Hills, 4109?? E-mail (Work): david at davrom.com >> ?ABN: 81 096 990 804????????????????? E-mail (Priv): >> dmc1961 at dmc1961.id.au >> ?Website: http://davrom.com?????????? Skype: dmc1961 >> ?Podcast: http://ldup.com.au????????? Google: dmc1961 at gmail.com >> =--------------------------------------------------------------------------= >> >> ?Specialising in: Linux (Fedora/RedHat/CentOS), UNIX, SCO, MikroTik, >> ????????????????? Networking/Internet, E-mail/Web Technologies >> =--------------------------------------------------------------------------= >> >> ?Please note: Any e-mail communication bearing this signature is for >> ?the exclusive purpose of the sender and is not for publication >> ?without the expressed permission of the sender or respective >> ?sender's organisation. >> =--------------------------------------------------------------------------= >> > >-- As always, I remain at your service. Kindest Regards, David.M.Clark (Director - Senior Linux/UNIX Consultant) =-------------------------------------------------------------------------- Davrom Consulting Pty Ltd Mobile: 0418763124 PO Box 1644, Sunnybank Hills, 4109 E-mail (Work): david at davrom.com ABN: 81 096 990 804 E-mail (Priv): dmc1961 at dmc1961.id.au Website: http://davrom.com Skype: dmc1961 Podcast: http://ldup.com.au Google: dmc1961 at gmail.com =-------------------------------------------------------------------------- Specialising in: Linux (Fedora/RedHat/CentOS), UNIX, SCO, MikroTik, Networking/Internet, E-mail/Web Technologies =-------------------------------------------------------------------------- Please note: Any e-mail communication bearing this signature is for the exclusive purpose of the sender and is not for publication without the expressed permission of the sender or respective sender's organisation. =--------------------------------------------------------------------------=
David.M.Clark
2017-Oct-11 03:22 UTC
My sub-folder with Outlook work-around to date - update 201710111315 - Final
Hi All, After over a week of stuffing around in /etc/dovecot/conf.d files and lots of trial and error, I now have a controlled setup to migrate one user at a time to Maildir without affecting the other mbox based users. For the sake of not posting an essay, if you go to this web page: http://dmc1961.id.au/howto_17101101.php you will see what I have done (moderators please let me know if this is the correct or allowable practice to post links rather than massive e-mails to the group?). My sincere thanks to all who contributed and helped steer me in the right direction - I got a little lost on-line for a while but eventually got back to the right setup (our beloved Linux does have a few different file locations and setup based on the releases out there, so these were a little confusing). Working well now on my test environment and on a test user on the client's box we need to convert, so if there are any more gotchas I will add them to the how-to web page and update you all. Was a battle at times but it was a war worth winning. -- As always, I remain at your service. Kindest Regards, David.M.Clark (Director - Senior Linux/UNIX Consultant) =-------------------------------------------------------------------------- Davrom Consulting Pty Ltd Mobile: 0418763124 PO Box 1644, Sunnybank Hills, 4109 E-mail (Work): david at davrom.com ABN: 81 096 990 804 E-mail (Priv): dmc1961 at dmc1961.id.au Website: http://davrom.com Skype: dmc1961 Podcast: http://ldup.com.au Google: dmc1961 at gmail.com =-------------------------------------------------------------------------- Specialising in: Linux (Fedora/RedHat/CentOS), UNIX, SCO, MikroTik, Networking/Internet, E-mail/Web Technologies =-------------------------------------------------------------------------- Please note: Any e-mail communication bearing this signature is for the exclusive purpose of the sender and is not for publication without the expressed permission of the sender or respective sender's organisation. =--------------------------------------------------------------------------=
Possibly Parallel Threads
- My sub-folder with Outlook work-around to date
- My sub-folder with Outlook work-around to date
- My sub-folder with Outlook work-around to date
- My sub-folder with Outlook work-around to date
- My sub-folder with Outlook work-around to date - update 201710111315 - Final