dovecot - Aug 2015 - Multidomain / IP Address Setup (Dovevot 2.2.10 on CentOS7 ) is failing: Fatal: Couldn't parse private ssl_key: error:0906D06C:PEM

Hello Alex

Am 14.08.2015 um 19:57 schrieb Alexander Dalloz:
> What have you done to exclude that SELinux interferes?
>
Just some sysinfo:
CentOS Linux release 7.1.1503 (Core) (i run yum update every day)

sestatus:
SELinux status:                 enabled
SELinuxfs mount:                /sys/fs/selinux
SELinux root directory:         /etc/selinux
Loaded policy name:             targeted
Current mode:                   enforcing
Mode from config file:          enforcing
Policy MLS status:              enabled
Policy deny_unknown status:     allowed
Max kernel policy version:      28
>
> Run "ausearch -m avc" to check for AVCs.
There is no indication SELinux is blocking somewhat

grep "SELinux is preventing" /var/log/messages
grep "denied" /var/log/audit/audit.log
ausearch -m avc shows no deniead messages
>
>> ### This works (Thunderbird, Outlook 2013, Opera Mail ect.) ####
>>
>> local mydomain01.tld {
>>
>>    protocol imap {
>>        ssl_cert >>
</etc/ssl/domains/mydomain.tld/imap/imap.mydomain02.tld.crt.pem
>>        ssl_key >>
</etc/ssl/domains/mydomain.tld/imap/imap.mydomain02.tld.key.pem
>>    }
>>
>> }
>>
Sorry the above has some typo errors, forget it.

Ok, this works well:

Configfile: /etc/dovecot/conf.d/10-ssl.conf
protocol imap {
ssl_cert = 
</etc/ssl/domains/mydomain01.tld/imap/imap.mydomain01.tld.crt.pem
ssl_key  = 
</etc/ssl/domains/mydomain01.tld/imap/imap.mydomain01.tld.key.pem
}

if i change it to
protocol imap {
ssl_cert = 
</etc/ssl/domains/mydomain02.tld/imap/imap.mydomain02.tld.crt.pem
ssl_key  = 
</etc/ssl/domains/mydomain02.tld/imap/imap.mydomain02.tld.key.pem
}

This works well to (i can connect from a Windows box, with Mozilla 
Thunderbird, Microsoft Outlook 2013
an IMAP Folders are showing, EMail sending and receiving is working and 
the logs are show no error.

#### BUT ####
If i try something like this in /etc/dovecot/conf.d/10-ssl.conf

local imap.mydomain01.tld {
protocol imap {
ssl_cert = 
</etc/ssl/domains/mydomain01.tld/imap/imap.mydomain01.tld.crt.pem
ssl_key  = 
</etc/ssl/domains/mydomain01.tld/imap/imap.mydomain01.tld.key.pem
}
}

local imap.mydomain01.tld {
protocol imap {
ssl_cert = 
</etc/ssl/domains/mydomain02.tld/imap/imap.mydomain02.tld.crt.pem
ssl_key  = 
</etc/ssl/domains/mydomain02.tld/imap/imap.mydomain02.tld.key.pem
}
}

It throws errors like this
"imap-login "parse private ssl_key: error:0906D06C:PEM"
in the logfile /var/maillog

The certs are accepted each in single domainmode but failing in 
multidomain mode.
I have checked if local_name works (SNI) with the fully DNS Domainname 
or just the IP-Address
but this doesnt show any effects.  Multidomainmode of Dovecot is

Notes:
The certs are StartSSL Domain validated free certs, pointing to 
imap.mydomain01.tld and imap.mydomain02.tld
In single Domain mod like explained abow any of the two certificate is 
accepted and Thunderbird and Outlook
accepting the certs as StartSSL without any warning or error message.

ps:
imap.mydomain01.tld.key begins with -----BEGIN RSA PRIVATE KEY----- and 
ends with -----END RSA PRIVATE KEY-----
imap.mydomain02.tld.key begins with -----BEGIN RSA PRIVATE KEY----- and 
ends with -----END RSA PRIVATE KEY-----

ps2:
There was a hint on some website thadt dovecot needs the certs in a 
single *.pem file because the implementation of SNI
and related code "was poorly implemented".

Thanks , Drav

### CORRECTION
Am 15.08.2015 um 03:22 schrieb dravion.smith at gmx.net:
>
> #### BUT ####
> If i try something like this in /etc/dovecot/conf.d/10-ssl.conf
>
> local imap.mydomain01.tld {
> protocol imap {
> ssl_cert = 
> </etc/ssl/domains/mydomain01.tld/imap/imap.mydomain01.tld.crt.pem
> ssl_key  = 
> </etc/ssl/domains/mydomain01.tld/imap/imap.mydomain01.tld.key.pem
> }
> }
>
> local imap.mydomain02.tld {
> protocol imap {
> ssl_cert = 
> </etc/ssl/domains/mydomain02.tld/imap/imap.mydomain02.tld.crt.pem
> ssl_key  = 
> </etc/ssl/domains/mydomain02.tld/imap/imap.mydomain02.tld.key.pem
> }
> }
>
> It throws errors like this
> "imap-login "parse private ssl_key: error:0906D06C:PEM"
> in the logfile /var/maillog

On 08/14/15 20:30, dravion.smith at gmx.net wrote:
>
> ### CORRECTION
> Am 15.08.2015 um 03:22 schrieb dravion.smith at gmx.net:
>>
>> #### BUT ####
>> If i try something like this in /etc/dovecot/conf.d/10-ssl.conf
>>
local_name imap.mydomain01.tld
>> local imap.mydomain01.tld {
>> protocol imap {
>> ssl_cert = 
>> </etc/ssl/domains/mydomain01.tld/imap/imap.mydomain01.tld.crt.pem
>> ssl_key  = 
>> </etc/ssl/domains/mydomain01.tld/imap/imap.mydomain01.tld.key.pem
>> }
>> }
>>
local_name imap.mydomain02.tld
>> local imap.mydomain02.tld {
>> protocol imap {
>> ssl_cert = 
>> </etc/ssl/domains/mydomain02.tld/imap/imap.mydomain02.tld.crt.pem
>> ssl_key  = 
>> </etc/ssl/domains/mydomain02.tld/imap/imap.mydomain02.tld.key.pem
>> }
>> }
>>
>> It throws errors like this
>> "imap-login "parse private ssl_key: error:0906D06C:PEM"
>> in the logfile /var/maillog
If they are separate ip's why not try that?

local x.x.x.x { etc..

http://wiki2.dovecot.org/SSL/DovecotConfiguration

I think you should post doveconf -n output.

On 08/14/15 20:30, dravion.smith at gmx.net wrote:
>
> ### CORRECTION
> Am 15.08.2015 um 03:22 schrieb dravion.smith at gmx.net:
>>
>> #### BUT ####
>> If i try something like this in /etc/dovecot/conf.d/10-ssl.conf
>>
>> local imap.mydomain01.tld {
>> protocol imap {
>> ssl_cert = 
>> </etc/ssl/domains/mydomain01.tld/imap/imap.mydomain01.tld.crt.pem
>> ssl_key  = 
>> </etc/ssl/domains/mydomain01.tld/imap/imap.mydomain01.tld.key.pem
>> }
>> }
>>
>> local imap.mydomain02.tld {
>> protocol imap {
>> ssl_cert = 
>> </etc/ssl/domains/mydomain02.tld/imap/imap.mydomain02.tld.crt.pem
>> ssl_key  = 
>> </etc/ssl/domains/mydomain02.tld/imap/imap.mydomain02.tld.key.pem
>> }
>> }
>>
>> It throws errors like this
>> "imap-login "parse private ssl_key: error:0906D06C:PEM"
>> in the logfile /var/maillog