On 31/05/18 02:13, Jerry Geis wrote:> I have NOUVEAU driver disabled however its "showing" in my X log
file.
>
> [ 140.086] (II) NVIDIA dlloader X Driver 390.59 Wed May 9 21:30:06 PDT
> 2018
> [ 140.086] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
> [ 140.086] (II) NOUVEAU driver
> [ 140.087] (II) NOUVEAU driver for NVIDIA chipset families :
> [ 140.087] RIVA TNT (NV04)
> [ 140.087] RIVA TNT2 (NV05)
> [ 140.087] GeForce 256 (NV10)
> [ 140.087] GeForce 2 (NV11, NV15)
> [ 140.087] GeForce 4MX (NV17, NV18)
> [ 140.087] GeForce 3 (NV20)
> [ 140.087] GeForce 4Ti (NV25, NV28)
> [ 140.088] GeForce FX (NV3x)
> [ 140.088] GeForce 6 (NV4x)
> [ 140.088] GeForce 7 (G7x)
> [ 140.088] GeForce 8 (G8x)
> [ 140.088] GeForce GTX 200 (NVA0)
> [ 140.088] GeForce GTX 400 (NVC0)
> [ 140.088] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
>
>>From /proc/cmdline
> rdblacklist=nouveau nouveau.modeset=0
>
I believe the correct format is:
rd.driver.blacklist=nouveau
> more /etc/modprobe.d/nvidia-installer-disable-nouveau.conf
> # generated by nvidia-installer
> blacklist nouveau
> options nouveau modeset=0
>
At some point in the past, I think the location for blacklist files
changed to /usr/lib/modprobe.d/ and there was a bug in dracut which
means the old location wasn't being picked up, so if the driver isn't
being blacklisted in the initramfs then this could be the cause.
The other obvious question is does the NVIDIA installer update the
initramfs after installation?
> These are the items to set to disable nouveau. Why is it
"logging" in the X
> file?
Check your raminitfs to make sure nouveau is being blacklisted:
lsinitrd -k $(uname -r) | grep nvidia-installer-disable-nouveau.conf
If not, try running:
dracut -f /boot/initramfs-$(uname -r).img $(uname -r)
and check again.
If that still doesn't work, see my comment above about the location of
the blacklist file.
> Thanks,
>
> Jerry