Centos 5 is still soon end of life. Using it as ipsec gateway is .. Eero 21.3.2016 7.25 ip. "Mike - st257" <silvertip257 at gmail.com> kirjoitti:> On Mon, Mar 21, 2016 at 1:17 PM, Mike - st257 <silvertip257 at gmail.com> > wrote: > > > I second Eero's comment, use a new IPSec daemon. > > > > Openswan was forked and became Libreswan. Paul, now a RH employee, was a > > main developer for the Openswan project before he and others created the > > Libreswan fork. > > https://libreswan.org/ > > > > EL6 has Openswan > > EL7 has Libreswan > > > > Racoon isn't all that fun to work with. > > If you have the option, ditch it and EL5 and move to a newer platform > > (preferably EL7 with Libreswan). > > > > There's an RPM spec file (though I've not used it) for building Openswan > for EL5. > https://github.com/xelerance/Openswan/tree/master/packaging/centos5 > > Additionally, here's some info but I advise against the Racoon IPSec > daemon. > > https://www.centos.org/docs/5/html/5.2/Deployment_Guide/sec-racoon-conf.html > https://wiki.debian.org/IPsec > > > > > > > > On Mon, Mar 21, 2016 at 1:08 PM, Eero Volotinen <eero.volotinen at iki.fi> > > wrote: > > > >> Yes you can. Please use newer version of centos and strong/openswan. > >> > >> Eero > >> 21.3.2016 7.05 ip. "Glenn Pierce" <glennpierce at gmail.com> kirjoitti: > >> > >> > Hi I hope someone can answer something I'm sure is quite basic. > >> > > >> > I am following the instructions at > >> > https://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-vpn.html > >> > On setting up a VPN > >> > > >> > The part I am having trouble with is when it show the > >> > /etc/racoon/racoon.conf file. > >> > But it doesn't say whay you have to do with this file. > >> > > >> > When I bring up my connection > >> > > >> > ifup bicester > >> > > >> > I get > >> > RTNETLINK answers: No such device > >> > > >> > looking at /var/messages I see > >> > > >> > ERROR: failed to bind to address 127.0.0.1[500] (Address already in > >> use). > >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address *.*.*.*[500] > >> > (Address already in use). > >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address *.*.*.*[500] > >> > (Address already in use). > >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address *.*.*.*[500] > >> > (Address already in use). > >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address ::1[500] > >> > (Address already in use). > >> > Mar 21 17:01:05 racoon: INFO: fe80::bcef:4fff:fe66:82ec%eth0[500] > >> > used as isakmp port (fd=25) > >> > > >> > There was an existing setup done long ago. > >> > > >> > How can I setup more than one vpn connection (manually as this is a > >> > headless server) > >> > or is that not possible ? > >> > > >> > Thanks for any pointers > >> > _______________________________________________ > >> > CentOS mailing list > >> > CentOS at centos.org > >> > https://lists.centos.org/mailman/listinfo/centos > >> > > >> _______________________________________________ > >> CentOS mailing list > >> CentOS at centos.org > >> https://lists.centos.org/mailman/listinfo/centos > >> > > > > > > > > -- > > ---~~.~~--- > > Mike > > // SilverTip257 // > > > > > > -- > ---~~.~~--- > Mike > // SilverTip257 // > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos >
Will ask my boss :) We are hosted on memset so not so easy to update Thanks On 21 March 2016 at 17:36, Eero Volotinen <eero.volotinen at iki.fi> wrote:> Centos 5 is still soon end of life. Using it as ipsec gateway is .. > > Eero > 21.3.2016 7.25 ip. "Mike - st257" <silvertip257 at gmail.com> kirjoitti: > >> On Mon, Mar 21, 2016 at 1:17 PM, Mike - st257 <silvertip257 at gmail.com> >> wrote: >> >> > I second Eero's comment, use a new IPSec daemon. >> > >> > Openswan was forked and became Libreswan. Paul, now a RH employee, was a >> > main developer for the Openswan project before he and others created the >> > Libreswan fork. >> > https://libreswan.org/ >> > >> > EL6 has Openswan >> > EL7 has Libreswan >> > >> > Racoon isn't all that fun to work with. >> > If you have the option, ditch it and EL5 and move to a newer platform >> > (preferably EL7 with Libreswan). >> > >> >> There's an RPM spec file (though I've not used it) for building Openswan >> for EL5. >> https://github.com/xelerance/Openswan/tree/master/packaging/centos5 >> >> Additionally, here's some info but I advise against the Racoon IPSec >> daemon. >> >> https://www.centos.org/docs/5/html/5.2/Deployment_Guide/sec-racoon-conf.html >> https://wiki.debian.org/IPsec >> >> >> > >> > >> > On Mon, Mar 21, 2016 at 1:08 PM, Eero Volotinen <eero.volotinen at iki.fi> >> > wrote: >> > >> >> Yes you can. Please use newer version of centos and strong/openswan. >> >> >> >> Eero >> >> 21.3.2016 7.05 ip. "Glenn Pierce" <glennpierce at gmail.com> kirjoitti: >> >> >> >> > Hi I hope someone can answer something I'm sure is quite basic. >> >> > >> >> > I am following the instructions at >> >> > https://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-vpn.html >> >> > On setting up a VPN >> >> > >> >> > The part I am having trouble with is when it show the >> >> > /etc/racoon/racoon.conf file. >> >> > But it doesn't say whay you have to do with this file. >> >> > >> >> > When I bring up my connection >> >> > >> >> > ifup bicester >> >> > >> >> > I get >> >> > RTNETLINK answers: No such device >> >> > >> >> > looking at /var/messages I see >> >> > >> >> > ERROR: failed to bind to address 127.0.0.1[500] (Address already in >> >> use). >> >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address *.*.*.*[500] >> >> > (Address already in use). >> >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address *.*.*.*[500] >> >> > (Address already in use). >> >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address *.*.*.*[500] >> >> > (Address already in use). >> >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address ::1[500] >> >> > (Address already in use). >> >> > Mar 21 17:01:05 racoon: INFO: fe80::bcef:4fff:fe66:82ec%eth0[500] >> >> > used as isakmp port (fd=25) >> >> > >> >> > There was an existing setup done long ago. >> >> > >> >> > How can I setup more than one vpn connection (manually as this is a >> >> > headless server) >> >> > or is that not possible ? >> >> > >> >> > Thanks for any pointers >> >> > _______________________________________________ >> >> > CentOS mailing list >> >> > CentOS at centos.org >> >> > https://lists.centos.org/mailman/listinfo/centos >> >> > >> >> _______________________________________________ >> >> CentOS mailing list >> >> CentOS at centos.org >> >> https://lists.centos.org/mailman/listinfo/centos >> >> >> > >> > >> > >> > -- >> > ---~~.~~--- >> > Mike >> > // SilverTip257 // >> > >> >> >> >> -- >> ---~~.~~--- >> Mike >> // SilverTip257 // >> _______________________________________________ >> CentOS mailing list >> CentOS at centos.org >> https://lists.centos.org/mailman/listinfo/centos >> > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos
Err. Sounds like security nightmare. 21.3.2016 7.47 ip. "Glenn Pierce" <glennpierce at gmail.com> kirjoitti:> Will ask my boss :) We are hosted on memset so not so easy to update > > Thanks > > On 21 March 2016 at 17:36, Eero Volotinen <eero.volotinen at iki.fi> wrote: > > Centos 5 is still soon end of life. Using it as ipsec gateway is .. > > > > Eero > > 21.3.2016 7.25 ip. "Mike - st257" <silvertip257 at gmail.com> kirjoitti: > > > >> On Mon, Mar 21, 2016 at 1:17 PM, Mike - st257 <silvertip257 at gmail.com> > >> wrote: > >> > >> > I second Eero's comment, use a new IPSec daemon. > >> > > >> > Openswan was forked and became Libreswan. Paul, now a RH employee, > was a > >> > main developer for the Openswan project before he and others created > the > >> > Libreswan fork. > >> > https://libreswan.org/ > >> > > >> > EL6 has Openswan > >> > EL7 has Libreswan > >> > > >> > Racoon isn't all that fun to work with. > >> > If you have the option, ditch it and EL5 and move to a newer platform > >> > (preferably EL7 with Libreswan). > >> > > >> > >> There's an RPM spec file (though I've not used it) for building Openswan > >> for EL5. > >> https://github.com/xelerance/Openswan/tree/master/packaging/centos5 > >> > >> Additionally, here's some info but I advise against the Racoon IPSec > >> daemon. > >> > >> > https://www.centos.org/docs/5/html/5.2/Deployment_Guide/sec-racoon-conf.html > >> https://wiki.debian.org/IPsec > >> > >> > >> > > >> > > >> > On Mon, Mar 21, 2016 at 1:08 PM, Eero Volotinen < > eero.volotinen at iki.fi> > >> > wrote: > >> > > >> >> Yes you can. Please use newer version of centos and strong/openswan. > >> >> > >> >> Eero > >> >> 21.3.2016 7.05 ip. "Glenn Pierce" <glennpierce at gmail.com> kirjoitti: > >> >> > >> >> > Hi I hope someone can answer something I'm sure is quite basic. > >> >> > > >> >> > I am following the instructions at > >> >> > > https://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-vpn.html > >> >> > On setting up a VPN > >> >> > > >> >> > The part I am having trouble with is when it show the > >> >> > /etc/racoon/racoon.conf file. > >> >> > But it doesn't say whay you have to do with this file. > >> >> > > >> >> > When I bring up my connection > >> >> > > >> >> > ifup bicester > >> >> > > >> >> > I get > >> >> > RTNETLINK answers: No such device > >> >> > > >> >> > looking at /var/messages I see > >> >> > > >> >> > ERROR: failed to bind to address 127.0.0.1[500] (Address already in > >> >> use). > >> >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address > *.*.*.*[500] > >> >> > (Address already in use). > >> >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address > *.*.*.*[500] > >> >> > (Address already in use). > >> >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address > *.*.*.*[500] > >> >> > (Address already in use). > >> >> > Mar 21 17:01:05 racoon: ERROR: failed to bind to address ::1[500] > >> >> > (Address already in use). > >> >> > Mar 21 17:01:05 racoon: INFO: fe80::bcef:4fff:fe66:82ec%eth0[500] > >> >> > used as isakmp port (fd=25) > >> >> > > >> >> > There was an existing setup done long ago. > >> >> > > >> >> > How can I setup more than one vpn connection (manually as this is a > >> >> > headless server) > >> >> > or is that not possible ? > >> >> > > >> >> > Thanks for any pointers > >> >> > _______________________________________________ > >> >> > CentOS mailing list > >> >> > CentOS at centos.org > >> >> > https://lists.centos.org/mailman/listinfo/centos > >> >> > > >> >> _______________________________________________ > >> >> CentOS mailing list > >> >> CentOS at centos.org > >> >> https://lists.centos.org/mailman/listinfo/centos > >> >> > >> > > >> > > >> > > >> > -- > >> > ---~~.~~--- > >> > Mike > >> > // SilverTip257 // > >> > > >> > >> > >> > >> -- > >> ---~~.~~--- > >> Mike > >> // SilverTip257 // > >> _______________________________________________ > >> CentOS mailing list > >> CentOS at centos.org > >> https://lists.centos.org/mailman/listinfo/centos > >> > > _______________________________________________ > > CentOS mailing list > > CentOS at centos.org > > https://lists.centos.org/mailman/listinfo/centos > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos >
Glenn Pierce wrote:> Will ask my boss :) We are hosted on memset so not so easy to update > > ThanksUm, wait a minute: you're hosted? And they haven't pushed you to 6 years ago? They haven't sent warnings that 5 was hitting eol? Who are they, please? I want to make sure that if someone asks me about hosting, I can add that to places they should avoid. mark