Hi all!
After booting the server I have this message:
irq 50: nobody cared (try booting with the "irqpoll" option)
Call Trace:
<IRQ> [<ffffffff800c17e6>] __report_bad_irq+0x30/0x7d
[<ffffffff800c1a19>] note_interrupt+0x1e6/0x227
[<ffffffff800c0f15>] __do_IRQ+0xbd/0x103
[<ffffffff8006e249>] do_IRQ+0x13f/0x14d
[<ffffffff8006ca05>] default_idle+0x0/0x50
[<ffffffff80060665>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff8006ca2e>] default_idle+0x29/0x50
[<ffffffff8004b45d>] cpu_idle+0x77/0x96
[<ffffffff803f3826>] start_kernel+0x240/0x245
[<ffffffff803f3237>] _sinittext+0x237/0x23e
handlers:
[<ffffffff801df6c6>] (usb_hcd_irq+0x0/0x55)
Disabling IRQ #50
# cat /proc/interrupts
CPU0 CPU1
0: 100127 89815252 IO-APIC-edge timer
1: 144 82 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
8: 0 1 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 2783 1158 IO-APIC-edge i8042
50: 82343 17657 IO-APIC-level ehci_hcd:usb2
58: 0 87 IO-APIC-level ohci_hcd:usb3, HDA Intel
66: 0 0 IO-APIC-level ohci_hcd:usb4
98: 14065984 0 PCI-MSI eth0
233: 343943 698091 IO-APIC-level ehci_hcd:usb1, ahci
NMI: 2027 2500
LOC: 89901484 89901412
ERR: 0
MIS: 0
Server works normal, but what should I do with this ? Disable a USB
support ?
Hardware: Asus M2N-VM DVI, Athlon X2 4800+, 6G DDR2
Centos 5.3 x86_64
If you wish, dmesg here: http://paix.org.ua/tmp/dmesg_270509.txt
Thanks!.
--
Best wishes, Sergej Kandyla
Sergej Kandyla wrote:> Hi all! > > After booting the server I have this message: > > > irq 50: nobody cared (try booting with the "irqpoll" option)^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^> Server works normal, but what should I do with this ?Ralph -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: <http://lists.centos.org/pipermail/centos/attachments/20090528/c7e9674b/attachment-0004.sig>
Ralph Angenendt ?????:> Sergej Kandyla wrote: > >> Hi all! >> >> After booting the server I have this message: >> >> >> irq 50: nobody cared (try booting with the "irqpoll" option) >> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > >Oh, thanks... currently I don't see this message after reboot with irqpoll. Could you advice about second issue. When booting I see powernow-k8: Pre-initialization of ACPI failed powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (2 cpu cores) (version 2.20.00) powernow-k8: Your BIOS does not provide _PSS objects. PowerNow! does not work on SMP systems without _PSS objects. Complain to your BIOS vendor. powernow-k8: Your BIOS does not provide _PSS objects. PowerNow! does not work on SMP systems without _PSS objects. Complain to your BIOS vendor. I googled and find next advice: "This is displayed because the CPU frequency scaling is disabled. Enable it by setting the "AMD Cool 'n' Quiet Function" in the BIOS settings to "Auto" and that warning will disappear. (You'll find it in Advanced->CPU Configuration)" But I think that I don't need the CPU frequency scaling on the server. What is the best solution? Never mind about this message ? Thanks in advice. -- Best wishes, Sergej Kandyla