At Tue, 19 May 2009 09:04:43 -0400 CentOS mailing list <centos at
centos.org> wrote:
>
>
>
> I reimaged a compute node on our cluster with the latest 5.3 updates (we
> were previously running 5.2), but we kept the kernel at 2.6.18-92.1.10.el5
> until I can find time to rebuild some of our kernel modules. After the
> image install finishes and the system reboots, the eth0 ethernet interface
> disappears. If I do an ifconfig ??a, I see what should be eth0, but it??s
> listed as __tmp2081258173.
>
> [root at node0770 ~]# ifconfig -a
> __tmp2081258173 Link encap:Ethernet HWaddr 00:1E:68:86:67:04
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> Interrupt:66
>
> The dmesg output isn??t very helpful:
>
> [root at node0770 ~]# dmesg|grep eth0
> eth0: forcedeth.c: subsystem: 0108e:534b bound to 0000:00:08.0
>
>
> If I remove our lustre modules that were built for the 2.6.18-92.1.10.el5
> kernel and reboot, the eth0 interface reappears. Another piece to this
> puzzle is that this problem only seems to happen on our Sun X2200??s. Our
> Dell 1950??s work just fine after putting on the 5.3 updates. Anyone know
> what could cause this behavior?
Check /etc/modprobe.conf (and
/etc/sysconfig/network-scripts/if-cfg-eth0) -- if you are doing a
disk-to-disk backup type of install, the alias for eth0 is very likely
wrong (and the HW address in /etc/sysconfig/network-scripts/if-cfg-eth0
is also wrong). You may have to manually update these two files on the
'new' machine, since it likely has a different NIC, requiring a
different driver. It will also have a different MAC (HW) address as
well. In the old days, kudzu would detect this and pop up during the
boot process.
What does lspci display?
>
> Thanks,
> Randy
> MIME-Version: 1.0
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
>
--
Robert Heller -- 978-544-6933
Deepwoods Software -- Download the Model Railroad System
http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows
heller at deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/