CentOS - Mar 2007 - Ethernet not working

I have just installed CentOS 4.4 and can't get the ethernet to work
Ethernet is built into the motherboard: Marrvell Technology Ltd. 88E8001
Gigabit Ethernet Controler (reported by Network Configuration)
It shows the device is active.
using static address
/etc/resolv.conf is setup correctly

The problem is that I can not talk to anything outside the system.  This has
worked with Mandriva, Fedora, SuSe and gentoo.

Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.centos.org/pipermail/centos/attachments/20070228/b46434fe/attachment-0001.html>

> I have just installed CentOS 4.4 and can't get the ethernet to work
> Ethernet is built into the motherboard: Marrvell Technology Ltd. 88E8001
> Gigabit Ethernet Controler (reported by Network Configuration)
> It shows the device is active.
> using static address
> /etc/resolv.conf is setup correctly
>
> The problem is that I can not talk to anything outside the system.  This
has
> worked with Mandriva, Fedora, SuSe and gentoo.
Have you tried the CentOS Plus kernel?

On 01/03/07, Mike Noble <mgnoble at gmail.com>
wrote:
> I have just installed CentOS 4.4 and can't get the ethernet to work
> Ethernet is built into the motherboard: Marrvell Technology Ltd. 88E8001
> Gigabit Ethernet Controler (reported by Network Configuration)
> It shows the device is active.
>  using static address
> /etc/resolv.conf is setup correctly
Have you tried stopping the firewall if that won't leave you too exposed?

# service iptables stop

Could you provide the pertinent details from...

# lsmod
# ifconfig -a
# netstat -rn

Will.

On Wed, 2007-02-28 at 22:51 -0800, Mike Noble wrote:
> I have just installed CentOS 4.4 and can't get the ethernet to work
> Ethernet is built into the motherboard: Marrvell Technology Ltd.
> 88E8001 Gigabit Ethernet Controler (reported by Network Configuration)
> It shows the device is active. 
> using static address
> /etc/resolv.conf is setup correctly
> 
> The problem is that I can not talk to anything outside the system.
> This has worked with Mandriva, Fedora, SuSe and gentoo.
> 
> Mike
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos

Could you please post an output of *ifconfig* and *ip route*?
I have the same network adapter on an CentOS and is working fine.


Calin

================================================For the next hour, WE will
control all that you see and hear.

I would try disabling PnP OS in the systems BIOS. I have had similar
problems in the past and this was what fixed the issue.

On 2/28/07, Mike Noble <mgnoble at gmail.com>
wrote:
>
> I have just installed CentOS 4.4 and can't get the ethernet to work
> Ethernet is built into the motherboard: Marrvell Technology Ltd. 88E8001
> Gigabit Ethernet Controler (reported by Network Configuration)
> It shows the device is active.
> using static address
> /etc/resolv.conf is setup correctly
>
> The problem is that I can not talk to anything outside the system.  This
> has worked with Mandriva, Fedora, SuSe and gentoo.
>
> Mike
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
>

-- 
Thx
Joshua Gimer
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.centos.org/pipermail/centos/attachments/20070303/bd5077fa/attachment.html>