Hi. I have a Centos 4.2 installed but the Raid 1 configuration wasn't set during the installation process. How could I build the Raid 1 after the system has been installed? Thanks. -- Cleber P. de Souza
Hi There, I know exactly what this error means, I am using Centos 4.2 on a Via EPIA system booting from a 2Gig Flash card. Power management is disabled and the flash card seems to work ok with DMA enabled (its a compact flash on an IDE adapter). But this crops up every day or so and the machine hangs. I have several of these boxes all from difference batches and suppliers and they all do it.... If anyone has any ideas I'm open to suggestions as how to cure this, I've tried all the usual. I am using Kingston 2Gig Single level cell flash cards (medium - high speed). Regards Pete
There was a Linux Journal article on just this scenario, it should be on their website, I found it via Google. On 1/23/06, Cleber P. de Souza <cleberps at gmail.com> wrote:> > Hi. > > I have a Centos 4.2 installed but the Raid 1 configuration wasn't set > during the installation process. How could I build the Raid 1 after > the system has been installed? > > Thanks. > > -- > Cleber P. de Souza > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >-- Howard Fore, howard.fore at gmail.com "The less you know, the more you believe." - U2, Last Night On Earth -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20060123/4ec7a094/attachment-0005.html>
> On 1/23/06, Cleber P. de Souza < cleberps at gmail.com> wrote: > > Hi. > > > > I have a Centos 4.2 installed but the Raid 1 configuration wasn't set > > during the installation process. How could I build the Raid 1 after > > the system has been installed? > >man mdadm Very comprehensive command for making and managng raid. -- Sudev Barar Learning Linux