Neil Youngman
2017-Nov-08 15:02 UTC
[asterisk-users] Blocking outgping caller id on a PRI E1
I am trying to block/hide outgoing caller id on a PRI E1. It seems that it should be fairly simple, but it is defeating me. https://wiki.asterisk.org/wiki/display/AST/Function_CALLERID says: "to hide your caller id, use: Set(CALLERID(num-pres)=prohib)" That doesn't seem to do it. The calls are originated from AMI and I have tried a blank "CallerId:" line and "CallerId: <>"". Neither of those made any difference. I have also tried "hidecallerid=yes" in chan_dahdi.conf, but that has also made no difference. I assume that I am missing something obvious? Neil Youngman Neil Youngman Developer Wirefast Limited Wirefast provides secure corporate messaging services. See our messaging solutions at http://www.wirefast.com/ Please consider the environment. Does this email or attachment need to be printed? This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system. Any views or opinions are solely those of the author and do not necessarily represent those of Wirefast Limited Email transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. Wirefast Limited is registered in England & Wales Company number: 03865860 Registered Office: 7/10 Chandos Street, Cavendish Square, London, W1G 9DQ Wirefast definitions of classification can be found here: www.wirefast.com/classifications
David Duffett
2017-Nov-08 15:08 UTC
[asterisk-users] Blocking outgping caller id on a PRI E1
It is likely being set by your PRI provider. Contact them to investigate. All the best... On 8 Nov 2017 9:03 am, "Neil Youngman" <Neil.Youngman at wirefast.com> wrote:> I am trying to block/hide outgoing caller id on a PRI E1. > > It seems that it should be fairly simple, but it is defeating me. > > https://wiki.asterisk.org/wiki/display/AST/Function_CALLERID says: > "to hide your caller id, use: Set(CALLERID(num-pres)=prohib)" > > That doesn't seem to do it. > > The calls are originated from AMI and I have tried a blank "CallerId:" > line and "CallerId: <>"". Neither of those made any difference. > > I have also tried "hidecallerid=yes" in chan_dahdi.conf, but that has also > made no difference. > > I assume that I am missing something obvious? > > Neil Youngman > > > Neil Youngman > Developer > Wirefast Limited > > Wirefast provides secure corporate messaging services. > See our messaging solutions at http://www.wirefast.com/ > Please consider the environment. > Does this email or attachment need to be printed? > This message contains confidential information and is intended only > for the individual named. If you are not the named addressee you > should not disseminate, distribute or copy this email. Please > notify the sender immediately by email if you have received this > email by mistake and delete this email from your system. > > Any views or opinions are solely those of the author > and do not necessarily represent those of Wirefast Limited > > Email transmission cannot be guaranteed to be secure or error-free > as information could be intercepted, corrupted, lost, destroyed, > arrive late or incomplete, or contain viruses. The sender therefore > does not accept liability for any errors or omissions in the contents > of this message which arise as a result of email transmission. > Wirefast Limited is registered in England & Wales > Company number: 03865860 > Registered Office: 7/10 Chandos Street, Cavendish Square, London, W1G 9DQ > > Wirefast definitions of classification can be found here: > www.wirefast.com/classifications > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk. > org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20171108/4b577886/attachment.html>
Neil Youngman
2017-Nov-08 17:46 UTC
[asterisk-users] Blocking outgping caller id on a PRI E1
Thanks David
This line was operating with caller id withheld from a Cisco, so I am confident
that it is possible to block the caller id on the line.
If I've covered all the possibilities from the Asterisk end I will see if we
can get the supplier to assist, but I would prefer to get it done in Asterisk.
Neil
________________________________________
From: asterisk-users-bounces at lists.digium.com [asterisk-users-bounces at
lists.digium.com] on behalf of David Duffett [dduffett at digium.com]
Sent: 08 November 2017 15:08
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Blocking outgping caller id on a PRI E1
It is likely being set by your PRI provider.
Contact them to investigate.
All the best...
On 8 Nov 2017 9:03 am, "Neil Youngman" <Neil.Youngman at
wirefast.com<mailto:Neil.Youngman at wirefast.com>> wrote:
I am trying to block/hide outgoing caller id on a PRI E1.
It seems that it should be fairly simple, but it is defeating me.
https://wiki.asterisk.org/wiki/display/AST/Function_CALLERID says:
"to hide your caller id, use: Set(CALLERID(num-pres)=prohib)"
That doesn't seem to do it.
The calls are originated from AMI and I have tried a blank "CallerId:"
line and "CallerId: <>"". Neither of those made any
difference.
I have also tried "hidecallerid=yes" in chan_dahdi.conf, but that has
also made no difference.
I assume that I am missing something obvious?
Neil Youngman
Neil Youngman
Developer
Wirefast Limited
Wirefast provides secure corporate messaging services.
See our messaging solutions at http://www.wirefast.com/
Please consider the environment.
Does this email or attachment need to be printed?
This message contains confidential information and is intended only
for the individual named. If you are not the named addressee you
should not disseminate, distribute or copy this email. Please
notify the sender immediately by email if you have received this
email by mistake and delete this email from your system.
Any views or opinions are solely those of the author
and do not necessarily represent those of Wirefast Limited
Email transmission cannot be guaranteed to be secure or error-free
as information could be intercepted, corrupted, lost, destroyed,
arrive late or incomplete, or contain viruses. The sender therefore
does not accept liability for any errors or omissions in the contents
of this message which arise as a result of email transmission.
Wirefast Limited is registered in England & Wales
Company number: 03865860
Registered Office: 7/10 Chandos Street, Cavendish Square, London, W1G 9DQ
Wirefast definitions of classification can be found here:
www.wirefast.com/classifications<http://www.wirefast.com/classifications>
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Can you try exten => s,n,Set(CALLERID(num)=anonymous) in your dialplan before passing the call to the PRI? and/or exten => s,n,Set(CALLERID(name)=anonymous) and/or exten => s,n,Set(CALLERID(all)=anonymous) If it doesn't work, maybe replace the "anonymous" with "" or something else. Sorry, no guarantee, just a shot in the dark. Am 08.11.2017 um 16:02 schrieb Neil Youngman:> I am trying to block/hide outgoing caller id on a PRI E1. > > It seems that it should be fairly simple, but it is defeating me. > > https://wiki.asterisk.org/wiki/display/AST/Function_CALLERID says: > "to hide your caller id, use: Set(CALLERID(num-pres)=prohib)" > > That doesn't seem to do it. > > The calls are originated from AMI and I have tried a blank "CallerId:" line and "CallerId: <>"". Neither of those made any difference. > > I have also tried "hidecallerid=yes" in chan_dahdi.conf, but that has also made no difference. > > I assume that I am missing something obvious? > > Neil Youngman > > > Neil Youngman > Developer > Wirefast Limited > > Wirefast provides secure corporate messaging services. > See our messaging solutions at http://www.wirefast.com/ > Please consider the environment. > Does this email or attachment need to be printed? > This message contains confidential information and is intended only > for the individual named. If you are not the named addressee you > should not disseminate, distribute or copy this email. Please > notify the sender immediately by email if you have received this > email by mistake and delete this email from your system. > > Any views or opinions are solely those of the author > and do not necessarily represent those of Wirefast Limited > > Email transmission cannot be guaranteed to be secure or error-free > as information could be intercepted, corrupted, lost, destroyed, > arrive late or incomplete, or contain viruses. The sender therefore > does not accept liability for any errors or omissions in the contents > of this message which arise as a result of email transmission. > Wirefast Limited is registered in England & Wales > Company number: 03865860 > Registered Office: 7/10 Chandos Street, Cavendish Square, London, W1G 9DQ > > Wirefast definitions of classification can be found here: www.wirefast.com/classifications >
nathan Kirk
2017-Nov-08 19:10 UTC
[asterisk-users] Blocking outgping caller id on a PRI E1
If the pri accepts feature codes just prefix all calls with *67 or what ever your lec feature code is. Nathan Kirk> On Nov 8, 2017, at 12:58 PM, Markus <universe at truemetal.org> wrote: > > Can you try > > exten => s,n,Set(CALLERID(num)=anonymous) > > in your dialplan before passing the call to the PRI? > > and/or > > exten => s,n,Set(CALLERID(name)=anonymous) > > and/or > > exten => s,n,Set(CALLERID(all)=anonymous) > > If it doesn't work, maybe replace the "anonymous" with "" or something else. > > Sorry, no guarantee, just a shot in the dark. > > >> Am 08.11.2017 um 16:02 schrieb Neil Youngman: >> I am trying to block/hide outgoing caller id on a PRI E1. >> It seems that it should be fairly simple, but it is defeating me. >> https://wiki.asterisk.org/wiki/display/AST/Function_CALLERID says: >> "to hide your caller id, use: Set(CALLERID(num-pres)=prohib)" >> That doesn't seem to do it. >> The calls are originated from AMI and I have tried a blank "CallerId:" line and "CallerId: <>"". Neither of those made any difference. >> I have also tried "hidecallerid=yes" in chan_dahdi.conf, but that has also made no difference. >> I assume that I am missing something obvious? >> Neil Youngman >> Neil Youngman >> Developer >> Wirefast Limited >> Wirefast provides secure corporate messaging services. >> See our messaging solutions at http://www.wirefast.com/ >> Please consider the environment. >> Does this email or attachment need to be printed? >> This message contains confidential information and is intended only >> for the individual named. If you are not the named addressee you >> should not disseminate, distribute or copy this email. Please >> notify the sender immediately by email if you have received this >> email by mistake and delete this email from your system. >> Any views or opinions are solely those of the author >> and do not necessarily represent those of Wirefast Limited >> Email transmission cannot be guaranteed to be secure or error-free >> as information could be intercepted, corrupted, lost, destroyed, >> arrive late or incomplete, or contain viruses. The sender therefore >> does not accept liability for any errors or omissions in the contents >> of this message which arise as a result of email transmission. >> Wirefast Limited is registered in England & Wales >> Company number: 03865860 >> Registered Office: 7/10 Chandos Street, Cavendish Square, London, W1G 9DQ >> Wirefast definitions of classification can be found here: www.wirefast.com/classifications > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users