Hello All!
I asked week a so ago about how to call multiple phones alltogether (home,
office, cell)
Dial app looks simple, this is kind of what I have now:
---------------------
[globals]
IVAN_HOME_OFFICE=SIP/BF8
IVAN_OFFICE=SIP/CFC
IVAN_CELL=SIP/83 at callcentric
[internal]
exten =>
101,1,Dial(${IVAN_HOME_OFFICE}&${IVAN_OFFICE}&${IVAN_CELL},60)
same => n,VoiceMail(101 at default,u)
??????????
Now, I have basic automated attendant and I have Queues setup
???????????
[general]
autofill=yes
shared_lastcall=yes
[StandardQueue](!)
musicclass=default
joinempty=yes
leavewhenempty=yes
ringinuse=no
[Sales](StandardQueue)
member => SIP/BF8
member => SIP/CFC
[Support](StandardQueue)
member => SIP/BF8
member => SIP/CFC
??????????
Now this setup becomes less than ideal. I?d like to create ?bundles? of
extensions/numbers and just use them everywhere throughout the system.
How do I do that?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20150619/1e0643e7/attachment.html>
Hi again! Also, given my setup below, how do I send caller id to my cell? SIP/83 at callcentric is my cell, when I get incoming call when someone dials into Asterisk - I just see public calcentric?s DID number. I want to send a number of who CALLED IN into the Asterisk and possibly add couple numbers upfront or something like this to signal me that this call comes through the PBX and not directly to my cell? Thank you!> On Jun 19, 2015, at 2:30 PM, Ivan Demkovitch <idemkovitch at yahoo.com> wrote: > > Hello All! > > I asked week a so ago about how to call multiple phones alltogether (home, office, cell) > Dial app looks simple, this is kind of what I have now: > > --------------------- > [globals] > IVAN_HOME_OFFICE=SIP/BF8 > IVAN_OFFICE=SIP/CFC > IVAN_CELL=SIP/83 at callcentric > > [internal] > exten => 101,1,Dial(${IVAN_HOME_OFFICE}&${IVAN_OFFICE}&${IVAN_CELL},60) > same => n,VoiceMail(101 at default,u) > ?????????? > > > Now, I have basic automated attendant and I have Queues setup > > ??????????? > [general] > autofill=yes > shared_lastcall=yes > > [StandardQueue](!) > musicclass=default > joinempty=yes > leavewhenempty=yes > ringinuse=no > > [Sales](StandardQueue) > member => SIP/BF8 > member => SIP/CFC > > [Support](StandardQueue) > member => SIP/BF8 > member => SIP/CFC > ?????????? > > > Now this setup becomes less than ideal. I?d like to create ?bundles? of extensions/numbers and just use them everywhere throughout the system. > How do I do that?-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150619/60b53f33/attachment.html>
On Friday 19 Jun 2015, Ivan Demkovitch wrote:> Hi again! > > Also, given my setup below, how do I send caller id to my cell? > SIP/83 at callcentric is my cell, when I get incoming call when someone dials > into Asterisk - I just see public calcentric?s DID number. I want to send > a number of who CALLED IN into the Asterisk and possibly add couple > numbers upfront or something like this to signal me that this call comes > through the PBX and not directly to my cell?This is entirely dependent on your telco. Not everyone supports sending an ident that you don't own, as it kind of defeats the purpose of caller ID if anyone can just pretend that they are calling from any number. If you use Set(CALLERID(num-pres)=allowed) followed by Set(CALLERID(num)=${from_number}) and it doesn't work, the chances are that callcentric are actively preventing caller ID spoofing. -- AJS Note: Originating address only accepts e-mail from list! If replying off- list, change address to asterisk1list at earthshod dot co dot uk .