WTF is a jitterbuffer? Sent from my Verizon Wireless 4G LTE smartphone -------- Original message -------- From: Matthew Jordan <mjordan at digium.com> Date: 01/29/2015 10:41 AM (GMT-05:00) To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Subject: Re: [asterisk-users] JITTERBUFFER function On Thu, Jan 29, 2015 at 4:56 AM, Torbjorn Abrahamsson <torbjorn.abrahamsson at gmail.com> wrote:> Hello! > > > > I am going to use the JITTERBUFFER function in a SIP (and local channels) > only setup, but have some questions of how to use it: > > > > 1. Do I need to activate jbenable in sip.conf? Or is it enough to call > the JITTERBUFFER function?You only need to use the JITTERBUFFER function. The jbenable option will enable a jitter buffer on every channel created for that peer (or, if global, for every peer in the system). Depending on the version of Asterisk, it will also place the jitter buffer on the write side of the channel, which is often not what you want.> 2. What is the preferred way to invoke this function? Say I have > channel A which is not in need of buffering, while channel B do need it. If > A calls B and I do Set(JITTERBUFFER(fixed)=default), my guess is that it > will be attached to channel A:s read side. This is not the desired outcome, > as I would like to have it on B:s read side. How should I invoke this to > make the buffer belong to channel B? Maybe using b option to Dial? So that > when a JB-enabled device (B) calls out one just calls JITTERBUFFER from the > normal dialplan flow, and if there is a call to the device (B) one need to > use b option? Sound correct? >Invocation examples are on the wiki: https://wiki.asterisk.org/wiki/display/AST/Asterisk+13+Function_JITTERBUFFER The JITTERBUFFER function only affects the channel it is placed on, and not any channel it may be bridged with. That means you have to place it on the correct channel and not expect some magicry inside Asterisk to try and manipulate things for you (which is almost always a bad implementation decision). If you need it on an outbound channel, that means using one of the pre-dial handlers (https://wiki.asterisk.org/wiki/display/AST/Pre-Dial+Handlers) to place the jitter buffer on the outbound channel after its creation. Example: [default] exten => set_up_outbound,1,NoOp() same => n,Set(JITTERBUFFER(adaptive)=default) same => n,Return() exten => outbound_dial,1,NoOp() same => n,Dial(PJSIP/Alice,,b(default^set_up_outbound^1)) ... -- Matthew Jordan Digium, Inc. | Engineering Manager 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: http://digium.com & http://asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150130/2213501e/attachment.html>
> WTF is a jitterbuffer?http://lmgtfy.com/?q=jitterbuffer -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150130/b9e287c6/attachment.html>
Google is your friend!!! http://searchunifiedcommunications.techtarget.com/definition/jitter-buffer http://www.voiptroubleshooter.com/problems/jitterbuffer.html http://www.voip-info.org/wiki/view/Asterisk+new+jitterbuffer http://www.webopedia.com/TERM/J/jitter_buffer.html Peg Leg O'Brien amertel wrote:> WTF is a jitterbuffer? > > > Sent from my Verizon Wireless 4G LTE smartphone > > > -------- Original message -------- > From: Matthew Jordan <mjordan at digium.com> > Date: 01/29/2015 10:41 AM (GMT-05:00) > To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> > Subject: Re: [asterisk-users] JITTERBUFFER function > > On Thu, Jan 29, 2015 at 4:56 AM, Torbjorn Abrahamsson > <torbjorn.abrahamsson at gmail.com> wrote: > > Hello! > > > > > > > > I am going to use the JITTERBUFFER function in a SIP (and local channels) > > only setup, but have some questions of how to use it: > > > > > > > > 1. Do I need to activate jbenable in sip.conf? Or is it enough to call > > the JITTERBUFFER function? > > You only need to use the JITTERBUFFER function. > > The jbenable option will enable a jitter buffer on every channel > created for that peer (or, if global, for every peer in the system). > Depending on the version of Asterisk, it will also place the jitter > buffer on the write side of the channel, which is often not what you > want. > > > 2. What is the preferred way to invoke this function? Say I have > > channel A which is not in need of buffering, while channel B do need it. If > > A calls B and I do Set(JITTERBUFFER(fixed)=default), my guess is that it > > will be attached to channel A:s read side. This is not the desired outcome, > > as I would like to have it on B:s read side. How should I invoke this to > > make the buffer belong to channel B? Maybe using b option to Dial? So that > > when a JB-enabled device (B) calls out one just calls JITTERBUFFER from the > > normal dialplan flow, and if there is a call to the device (B) one need to > > use b option? Sound correct? > > > > Invocation examples are on the wiki: > > https://wiki.asterisk.org/wiki/display/AST/Asterisk+13+Function_JITTERBUFFER > > The JITTERBUFFER function only affects the channel it is placed on, > and not any channel it may be bridged with. That means you have to > place it on the correct channel and not expect some magicry inside > Asterisk to try and manipulate things for you (which is almost always > a bad implementation decision). If you need it on an outbound channel, > that means using one of the pre-dial handlers > (https://wiki.asterisk.org/wiki/display/AST/Pre-Dial+Handlers) to > place the jitter buffer on the outbound channel after its creation. > > Example: > > [default] > > exten => set_up_outbound,1,NoOp() > same => n,Set(JITTERBUFFER(adaptive)=default) > same => n,Return() > > exten => outbound_dial,1,NoOp() > same => n,Dial(PJSIP/Alice,,b(default^set_up_outbound^1)) > ... > > -- > Matthew Jordan > Digium, Inc. | Engineering Manager > 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA > Check us out at: http://digium.com & http://asterisk.org > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >-- Dog is my Co-Pilot -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150130/84e7598b/attachment.html>