similar to: JITTERBUFFER function

Hello! I am going to use the JITTERBUFFER function in a SIP (and local channels) only setup, but have some questions of how to use it: 1. Do I need to activate jbenable in sip.conf? Or is it enough to call the JITTERBUFFER function? 2. What is the preferred way to invoke this function? Say I have channel A which is not in need of buffering, while channel B do need it. If A

On Thu, Jan 29, 2015 at 4:56 AM, Torbjorn Abrahamsson <torbjorn.abrahamsson at gmail.com> wrote: > Hello! > > > > I am going to use the JITTERBUFFER function in a SIP (and local channels) > only setup, but have some questions of how to use it: > > > > 1. Do I need to activate jbenable in sip.conf? Or is it enough to call > the JITTERBUFFER function?

> > 1. Do I need to activate jbenable in sip.conf? Or is it enough to call > > the JITTERBUFFER function? > > You only need to use the JITTERBUFFER function. > > The jbenable option will enable a jitter buffer on every channel > created for that peer (or, if global, for every peer in the system). > Depending on the version of Asterisk, it will also place the

Hi, I have a question about jitterbuffer and PLC. I use Asterisk 1.6.2.0 and 1.6.0.20 or older. I use uLaw. My system map: ============================================================================= [ asterisk 2 ] -- # LOSS # -- # A # -- [ asterisk 1 ] -- # B # -- [ X-lite ] ============================================================================= I use two asterisk server.

Hello. I would like to run asterisk as an user other than root. I have seen some tutorials on the web, but I would like to know if there is some ?official? how-to for this. Is there? I looked at a thread on reviewboard regarding this (https://reviewboard.asterisk.org/r/654/). It was Paul Belangers work trying to make the installation process take care of this. But the conclusion seem to

Hello, We are setting up an asterisk system for voicemail with video possibilities. We are not using the voicemail app, but rather writing our own dialplan logic. The part of recording, and replaying, the voicemail works, and we receive both an h264 and an wav-file. What I now wonder is how to convert these into one file playable by a (standard) media player. I have not found any real good

Hi List, I have a question regarding jitterbuffer in Asterisk 1.4.24. I see that jitterbuffer is only effective on the receiving channels. My asterisk has only SIP accounts + 2 SIP trunk accounts to our branch office. Questions: 1. To enable jitter buffer on SIP channels it seems I have to enable and force it, right? 2. If I enable and force jitter buffer, Asterisk would always have to stay

Hello I have a problem where I would like to be able to send an arbitrary SIP domain when sending a call to a registered friend. By default the from domain is set to the IP of the Asterisk server, but I would like to set it to something else. The case is that when a call from a foreign domain comes in to the Asterisk, it will connect it to the callee (but with the domain changed). When

Hello there, I have set a simple environment to test some functionalities of asterisk's new jitterbuffer. The environment is composed of a sip softphone registering in asterisk 1.4 and calling a pstn phone connected to asterisk through a fxs board. Using the fixed buffer implementation the call quality is improved when injecting a artificial jitter in my local network. However, when changing

We have a customer on a wireless connection that has very bad jitter. They can hear people fine, but people have a very hard time hearing them. They are connected via a SPA-2102. It is a SIP client going to a SIP trunk. Something like this in sip.conf [general] would be in effect for all SIP clients: jbenable = yes jbmaxsize = 150 jbresyncthreshold = 1000 jbimpl = fixed jblog = yes I only want

Hello, I have written an AGI script for asterisk that uses google translate for text to speech synthesis. It supports a variety of different languages, local caching for the voice data and wideband audio. The voice in most languages is female and the quality of the synthesized speech is very high. More info about the script can be found here: http://zaf.github.com/asterisk-googletts/ the first

Two asterisk boxes 150 miles apart, both cvs-head as of this morning (and since Sept 27th), connected via iax2 with low-utilized ds3 internet, C7960 calls exten on remote system (also C7960), and call goes to VM. No other calls in either system (eg, no load). Both boxes have iax config'ed as: trunk=yes allow=ilbc jitterbuffer=yes Recorded VM messages are very distorted. Changing only

In iax.conf there is option jitterbuffer how about sip protocol ? Are jitterbuffer can configure in sip.conf ? Thanks, for your share

Hello, After checking out CVS HEAD from yesterday (for those new PLC/Jitterbuffer patches), I was affected by bug 3795 with my Polycom IP600's. After seing it resolved as of this morning (thanks Mark), I decided to try again... I can answer incoming calls. No problem there. Putting calls on hold, however, results in my Polycom IP600 indicating the call on hold, but the caller does

Hi guys, I 've tried asterisk 1.2.2. It work flawlessly for about 3 days then at the third days I activated setting jitterbuffer=yes and suddenly there is no voice when the call is picked up. It's really weird as if asterisk stops sending rtp packet. I've checked asterisk log and found nothing suspicious. Just weird :S. I tried it in 3 asterisk server and all of them are having

I find that DTMF does not work reliably if jitterbuffer=on for certain IAX providers. For instance, DTMF tones are missed entirely about half the time when I dial into an exgn.net account. However, it always works fine for an unlimitel.ca account. Someone else has seen this too: http://bugs.digium.com/view.php?id=6011 Can anyone suggest a workaround (other than jitterbuffer=off)? - Mike

I've been having problems with incoming IAX2 calls - some work, but a large fraction are answered with "dead air" or disconnects from my IAX provider. Disabling the jitterbuffer seems to eliminate the problem (so far)! Has anyone else seen this? I'm using 1.2.6, but I'm not sure what my provider is using. A snippet of the a failed incoming call IAX2 debug is attached

Hi, I am trying to communicate H323 and SIP users. I have configured h323.conf, sip.conf and ooh323.conf. If I am using gatekeeper (gnugk) then I am able to call successfully to h323 users using SJphone. And same for SIP users also. But when I disabled gatekeeper and trying to call using gateway with sjphone then every time whatever number I dial the call goes to asterisk and some computerized

What is the consensus on using the 1.4 jitterbuffer? Do most people enable it? We have a "PSTN" server that has our RBS T1 trunks in a central location, then have clients that connect via SIP to us for access to those trunks. Most of them are just fine, but lately we have a handful that are having latency and jitter issues. I am hesitant to just turn on the jitter buffer in