To Jonas:
I have an asterisk box at home and I have this line in my rtp.conf file:
rtpstart=10000
rtpend=10100
And My FW is setup to forward all incoming ports of range 10000-10100 to
the asterisk PC.
I've never had a problem since one year, but I have never received more
than two simultaneous calls with SIP clients.
Message: 5
Date: Fri, 13 Sep 2013 11:49:59 +0200
From: Jonas Kellens <jonas.kellens at telenet.be>
Subject: Re: [asterisk-users] RTP port ranges
To: Andrew Colin <andrew at vsave.co.za>
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Message-ID: <5232DFC7.2030601 at telenet.be>
Content-Type: text/plain; charset="iso-8859-1";
Format="flowed"
Hello,
and when I define 11500 - 11954 it should use a random port in this range.
Where is it stated that you MUST use 10000-20000 ???
Someone else please ?
Jonas.
On 09/13/2013 11:46 AM, Andrew Colin wrote:> Because normally it will use a random port between them
>
> On 9/13/2013 11:43 AM, Jonas Kellens wrote:
>> On 09/13/2013 11:41 AM, Andrew Colin wrote:
>>> Normally you should open ports 10000-20000 udp
>>>
>>>
>>>
>>> On 9/13/2013 11:37 AM, Jonas Kellens wrote:
>>>> I now see that an IP-address gets blocked by my firewall
because
>>>> there are packets coming onto port 11955.
>>>
>>
>>
>> Why do I need such a big range ? That's like for 250 concurrent
calls !
>>
>>
>>
>> Jonas.
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20130914/f723751d/attachment.htm>
