asterisk users - Feb 2013 - Meetme and MEETME_EXIT_CONTEXT

Hello,

using Asterisk 1.8.12.2

I am having trouble with exiting the conference room by entering a 
single digit.

option X of the Meetme()-application should do this.

I have following in extensions.conf :


/exten => _1000X,n,Set(MEETME_EXIT_CONTEXT=dynamic-nway-invite)//
//exten => _1000X,n,MeetMe(${CONFNO},dMX)//
//
//
//[dynamic-nway-invite]//
//exten => 0,1,NoOp(confno = ${CONFNO})//
//exten => 0,n,Read(DEST,dial,,i)//
//exten => 0,n,Set(DYNAMIC_FEATURES=nway-inv#nway-noinv)//
//exten => 0,n,Dial(Local/${DEST}@${LocalContext},,g)//
//exten => 0,n,Set(DYNAMIC_FEATURES=)//
//exten => 0,n,NoOp(tralalala)//
//exten => 0,n,Goto(dynamic-nway1,${CONFNO},1)//
//exten => i,1,Goto(dynamic-nway1,${CONFNO},1)//
/


So by pressing 0 (zero) while in the conference room, I should be able 
to exit and continue in the context [dynamic-nway-invite] . Correct ?

But nothing happens when pressing 0 (zero).

What am I missing ??



Kind regards,
Jonas.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20130220/d4a7e6a3/attachment.htm>

----- Original Message -----
> From: "Jonas Kellens" <jonas.kellens at telenet.be>
> But nothing happens when pressing 0 (zero).
Why not check the logs in /var/log/asterisk/full ?.  Make sure you have the full
log enabled in logger.conf and that you have VERBOSE,DEBUG,DTMF type messages
going to it.  You can also push those to the console and watch what happens when
you press zero. On the console be sure to turn up verbosity with "core set
verbose 5"

If you can't tell what is happening, post a pastebin link to the log and
point out (via timestamp or otherwise) where you would expect to see the DTMF
digit. Maybe someone will be able to take a look.

I'd also really recommend using ConfBridge which is newer than MeetMe. If
you switch to ConfBridge I'd recommend an upgrade to the latest 1.8.X as
well.


-- 
Rusty Newton 
OS Community Support Manager | Digium, Inc. | www.digium.com 
Office/Cell/Fax: 256-428-6200