asterisk users - Nov 2012 - How to determine if AMI MessageSend succeeded?

I am using Asterisk 11.0.0 and have a SIP user called 100. The user
registers via SIP but their network connection is cut off.

I then proceed to use AMI to send a message to them.

root at yumyum:~# telnet 127.0.0.1 5038
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Asterisk Call Manager/1.3
Action: Login
Username: admin
Secret: test

Response: Success
Message: Authentication accepted

Event: FullyBooted
Privilege: system,all
Status: Fully Booted

Action: MessageSend
To: sip:100
From: Test <sip:101 at 192.168.88.1>
Body: This is a test.

Response: Success
Message: Message successfully sent

However, clearly the message is not sent since the device lost its network
connection. How can I know that it failed? Even the log does not appear to
show anything unless I turn sip debug on.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20121106/20072376/attachment.htm>

I would recommend two things.  Number one would be to tweak your logger.conf
to separate out error messages. Number two would be to make your ami call do
this:

Set sip debug on

Ami action

Set sip debug off

 

This lets you get what you need without making a huge log file.

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wen Li
Sent: Tuesday, November 06, 2012 4:48 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] How to determine if AMI MessageSend succeeded?

 

I am using Asterisk 11.0.0 and have a SIP user called 100. The user
registers via SIP but their network connection is cut off.

 

I then proceed to use AMI to send a message to them.

 

root at yumyum:~# telnet 127.0.0.1 5038

Trying 127.0.0.1...

Connected to 127.0.0.1.

Escape character is '^]'.

Asterisk Call Manager/1.3

Action: Login

Username: admin

Secret: test

 

Response: Success

Message: Authentication accepted

 

Event: FullyBooted

Privilege: system,all

Status: Fully Booted

 

Action: MessageSend

To: sip:100

From: Test <sip:101 at 192.168.88.1 <mailto:sip%3A101 at 192.168.88.1>
>

Body: This is a test.

 

Response: Success

Message: Message successfully sent

 

However, clearly the message is not sent since the device lost its network
connection. How can I know that it failed? Even the log does not appear to
show anything unless I turn sip debug on.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20121106/ad11294f/attachment.htm>