Hi,
I am configuring my asterisk server as below scenario
Jisi----> Astrisk----->Analog PBX-----> Phones
For that I have Asterisk Server 1.8.1 in my PC
Digium card in my PC
TDM2400P with 5 Red (FXO) module
I install dahdi and modprobe in my system. After that i configured
chan_dahdi.conf file as follow
; General options
[channels]
usecallerid=yes
hidecallerid=no
callwaiting=yes
threewaycalling=yes
transfer=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
;FXO Modules
group=1
echocancel=yes
signalling=fxs_ks
context=Incoming
channel=1-24
Now when i am doing module reload chan_dahdi.so it gives output
soip*CLI> module reload chan_dahdi.so
-- Reloading module 'chan_dahdi.so' (DAHDI Telephony Driver)
== Parsing '/etc/asterisk/chan_dahdi.conf': == Found
== Parsing '/etc/asterisk/users.conf': == Found
[Nov 1 18:27:12] WARNING[5520]: chan_dahdi.c:17278 process_dahdi:
Ignoring any changes to 'signalling' (on reload) at line 16.
[Nov 1 18:27:12] ERROR[5520]: chan_dahdi.c:16176 build_channels: Unable
to reconfigure channel '1-24'
[Nov 1 18:27:12] WARNING[5520]: chan_dahdi.c:17955 reload: Reload of
chan_dahdi.so is unsuccessful!
i do not know why!! Any help appreciate to remove this error and get
module load for further configuration.
Thanks a lot
--
With Warm Regards
Harish
-------------------------------------------------------------------------------------------------------------------------------
This e-mail is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. If you are not the
intended recipient, please contact the sender by reply e-mail and destroy
all copies and the original message. Any unauthorized review, use,
disclosure, dissemination, forwarding, printing or copying of this email
is strictly prohibited and appropriate legal action will be taken.
-------------------------------------------------------------------------------------------------------------------------------
On Thursday 01 November 2012, Harish Mandowara wrote: [stuff deleted]> soip*CLI> module reload chan_dahdi.so > -- Reloading module 'chan_dahdi.so' (DAHDI Telephony Driver) > == Parsing '/etc/asterisk/chan_dahdi.conf': == Found > == Parsing '/etc/asterisk/users.conf': == Found > [Nov 1 18:27:12] WARNING[5520]: chan_dahdi.c:17278 process_dahdi: > Ignoring any changes to 'signalling' (on reload) at line 16. > [Nov 1 18:27:12] ERROR[5520]: chan_dahdi.c:16176 build_channels: Unable > to reconfigure channel '1-24' > [Nov 1 18:27:12] WARNING[5520]: chan_dahdi.c:17955 reload: Reload of > chan_dahdi.so is unsuccessful! > > > i do not know why!! Any help appreciate to remove this error and get > module load for further configuration.Five FXO modules is only 20 channels, so try changing channel=1-24 in your chan_dahdi.conf to channel=1-20 and see if this works. Obvious question: Why are you using 20 analogue lines, a.o.t. a single E1 ISDN line? -- AJS Answers come *after* questions.
it happened to me once, make sure dahdi is on;
/etc/init.d/dahdi restart
Also
Chckconfig dahdi on
If all fails, I had to re-install dahdi, and Asterisk should not be a big
deal,
cd /usr/lib/asterisk/
mv modules ./old-modules-backup
And re-install Asterisk, make sure you backup your current Asterisk Files,
then restore them once you re-install Asterisk. That was my solution!
Thanks,
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Harish
Mandowara
Sent: Thursday, November 01, 2012 6:06 AM
To: dahdi-commits at lists.digium.com; asterisk-users at lists.digium.com
Subject: [asterisk-users] dahdi module not loading
Hi,
I am configuring my asterisk server as below scenario
Jisi----> Astrisk----->Analog PBX-----> Phones
For that I have Asterisk Server 1.8.1 in my PC
Digium card in my PC
TDM2400P with 5 Red (FXO) module
I install dahdi and modprobe in my system. After that i configured
chan_dahdi.conf file as follow
; General options
[channels]
usecallerid=yes
hidecallerid=no
callwaiting=yes
threewaycalling=yes
transfer=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
;FXO Modules
group=1
echocancel=yes
signalling=fxs_ks
context=Incoming
channel=1-24
Now when i am doing module reload chan_dahdi.so it gives output
soip*CLI> module reload chan_dahdi.so
-- Reloading module 'chan_dahdi.so' (DAHDI Telephony Driver)
== Parsing '/etc/asterisk/chan_dahdi.conf': == Found
== Parsing '/etc/asterisk/users.conf': == Found
[Nov 1 18:27:12] WARNING[5520]: chan_dahdi.c:17278 process_dahdi:
Ignoring any changes to 'signalling' (on reload) at line 16.
[Nov 1 18:27:12] ERROR[5520]: chan_dahdi.c:16176 build_channels: Unable to
reconfigure channel '1-24'
[Nov 1 18:27:12] WARNING[5520]: chan_dahdi.c:17955 reload: Reload of
chan_dahdi.so is unsuccessful!
i do not know why!! Any help appreciate to remove this error and get module
load for further configuration.
Thanks a lot
--
With Warm Regards
Harish
----------------------------------------------------------------------------
---------------------------------------------------
This e-mail is for the sole use of the intended recipient(s) and may contain
confidential and privileged information. If you are not the intended
recipient, please contact the sender by reply e-mail and destroy all copies
and the original message. Any unauthorized review, use, disclosure,
dissemination, forwarding, printing or copying of this email is strictly
prohibited and appropriate legal action will be taken.
----------------------------------------------------------------------------
---------------------------------------------------
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users