Hi, Does anyone had the problem of asterisk SendFax + spandsp sending only the first page of a multi-page TIFF file? Seams to be related to spandsp ECM config. Any thoughts about it? Thanks, Gabriel -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20121005/ac471600/attachment.htm>
It could be a coding issue in your TIFF file. I have successfully sent multiple page TIFF's using plain POTS and DAHDI, but in 1.4 the sendfax module was finicky. From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gabriel Ortiz Lour Sent: Friday, October 05, 2012 1:54 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] SendFAX - multi-page TIFF Hi, Does anyone had the problem of asterisk SendFax + spandsp sending only the first page of a multi-page TIFF file? Seams to be related to spandsp ECM config. Any thoughts about it? Thanks, Gabriel -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20121005/be0a425e/attachment.htm>
On 10/06/2012 02:53 AM, Gabriel Ortiz Lour wrote:> Hi, > > Does anyone had the problem of asterisk SendFax + spandsp sending > only the first page of a multi-page TIFF file? > > Seams to be related to spandsp ECM config. > > Any thoughts about it? > > Thanks, > GabrielCheck the file with tiffinfo. Perhaps the format of the second page is different from the first, and incompatible with faxing. Spandsp will renegotiate and continue sending if the second page is of a different but valid format, but sending will end if the second page is, say, colour or the wrong width. Steve