Hi list! When I receive an incoming call from a SIP peer where I've configured disallow=all allow=alaw (and no other codec) I can see the following NOTICE on the console: Dropping incompatible voice frame SIP/peer07-0000007c of format ulaw since our native format has changed to (alaw) My question is: where can I change the native format from ulaw to alaw (or something else)? Is ulaw, as the native format, adjustable in some config file or is it hard-coded into Asterisk? It doesn't seem to have any effect on the voice quality but the messages on the console are quite annoying. PS: The peer doesn't support ulaw. PPS: Asterisk 10.7.0 Thanks a lot! Markus
Hi list, I'm resending this.. no one answered. No one got an idea? Thank you! When I receive an incoming call from a SIP peer where I've configured disallow=all allow=alaw (and no other codec) I can see the following NOTICE on the console: Dropping incompatible voice frame SIP/peer07-0000007c of format ulaw since our native format has changed to (alaw) My question is: where can I change the native format from ulaw to alaw (or something else)? Is ulaw, as the native format, adjustable in some config file or is it hard-coded into Asterisk? It doesn't seem to have any effect on the voice quality but the messages on the console are quite annoying. PS: The peer doesn't support ulaw. PPS: Asterisk 10.7.0 Thanks a lot! Markus
Reasonably Related Threads
- Choppy sound while converting alaw to ulaw
- Use the NEW ulaw/alaw codecs (slower, but cleaner)
- g711 ulaw vs alaw
- Asked to transmit frame type slin, while native formats is 0x8 (alaw) read/write = 0x4 (ulaw)/0x8 (alaw)
- Asterisk <-> WellGate 3502a : ulaw/alaw only?