asterisk users - Jul 2012 - Asterisk trying to call a queue with no members

Hi,

	I am trying to configure some static queues in asterisk, it's almost
working, the problem is that asterisk is not verifying if the queue has
logged members. For example, if I create queue called test, which has no
members logged in, and try to place a call using Queue(test) I get into
the queue, even if all phones are turned off, I tried to verify it with
the QUEUE_MEMBER function, using the "ready" parameter, it shows me
that
all members are logged in. Here is my queues.conf:

[general]
persistentmembers = yes
monitor-type = MixMonitor

[default-queue](!)
musicclass=default
joinempty=yes
leavewhenempty=no
strategy=random
timeout=10
retry=3
timeoutpriority=conf
autofill=yes
announce-position = yes
ringinuse=no



[recepcao](default-queue)
member => SIP/100
member => SIP/101
member => SIP/102


I haven't showed the other queues because there is no need to do that.
I've enabled sip qualifying in sip.conf, Must I do anything else to get
it working properly?


Thanks in advance.

Regards.

On 07/06/2012 10:15 AM, Antonio Modesto wrote:
> Hi,
>
> 	I am trying to configure some static queues in asterisk, it's almost
> working, the problem is that asterisk is not verifying if the queue has
> logged members. For example, if I create queue called test, which has no
> members logged in, and try to place a call using Queue(test) I get into
> the queue, even if all phones are turned off, I tried to verify it with
> the QUEUE_MEMBER function, using the "ready" parameter, it shows
me that
> all members are logged in. Here is my queues.conf:
>
> [general]
> persistentmembers = yes
> monitor-type = MixMonitor
>
> [default-queue](!)
> musicclass=default
> joinempty=yes
This setting will cause Queue() to allow callers to join the queue even 
if the queue has no members. Since you are saying you don't want that, 
you should turn it off.
> leavewhenempty=no
> strategy=random
> timeout=10
> retry=3
> timeoutpriority=conf
> autofill=yes
> announce-position = yes
> ringinuse=no
>
>
>
> [recepcao](default-queue)
> member => SIP/100
> member => SIP/101
> member => SIP/102
You have statically defined the members of this queue, there is no 
'logging in' required. The Queue() app does not try to determine whether
the devices you list as members are currently connected to Asterisk or not.

-- 
Kevin P. Fleming
Digium, Inc. | Director of Software Technologies
Jabber: kfleming at digium.com | SIP: kpfleming at digium.com | Skype: kpfleming
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at www.digium.com & www.asterisk.org