asterisk users - Apr 2012 - HELP!! Caller ID "unknown" for all inbound call (Satria Anamarta)

Hi Anam

It seem should be work, but I just have a question about chan_dahdi.conf 
regardless to parameter
rxwink=300              ; Atlas seems to use long (250ms) winks
By the way gain parameters shouldn?t have any effect to CID signal processing,
how about to comment, and test again, if still without working try to connect
parallel phone with Asterisk it will check if could be a hardware problem or
configuration parameter setting

Good luck 
Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com

Thanks ricardo for your reply :)

I will try to comment that line. One thing for sure: the cid is
working on a analog phone, I just test it this morning.

Btw, somebody told that this may be caused by irq conflict. Is it safe
to disable the audio card on bios ?

Thanks again :)

On 4/23/12, Mc GRATH Ricardo <mcgrathr at mail2web.com>
wrote:
> Hi Anam
>
> It seem should be work, but I just have a question about chan_dahdi.conf
> regardless to parameter
> rxwink=300              ; Atlas seems to use long (250ms) winks
> By the way gain parameters shouldn?t have any effect to CID signal
> processing, how about to comment, and test again, if still without working
> try to connect parallel phone with Asterisk it will check if could be a
> hardware problem or configuration parameter setting
>
> Good luck
> Mc GRATH Ricardo
> E-Mail mcgrathr at mail2web.com
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-- 
Sent from my mobile device

Hi

I'm not agree problem could be cause from IRQ setting, I think in that way
problem should be more unstable, moreover no voice communication problem with
DAHDI service start up.
Best regards
  
Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com

Are you able to add a Wait(2) at all to the beginning of your incoming
dialplan?  A lot of missing callerID problems are because the callerID
value gets sent after the initial call signaling comes in.


-- 
Thanks,
--Warren Selby, dCAP
http://www.SelbyTech.com <http://www.selbytech.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20120423/ca8024ea/attachment.htm>