asterisk users - Mar 2012 - [Slightly OT] Audiocodes Mediant Failover Routing with Asterisk

Greetings-

First off, my apologies for the slightly OT nature of this post. It does involve
Asterisk to a degree, but errs a bit on the side of Audiocodes inquiry. I accept
all responsibility for my actions and the consequences. :)

The scenario is this: I have an Asterisk box connected to a Mediant 2000 (M2K)
via T1. Calls made via DAHDI->T1->M2K are then routed by the M2K via SIP
using the Audiocodes Tel-to-IP routing tables to a remote IP. This has worked
quite well for some time.

I now want to add multiple IP's to the routing table for failover. However,
when adding additional entries to the Tel-to-IP routing table, and the first
entry fails, the other IPs are not attempted. The first IP is attempted, and if
it fails, the call fails instead of trying any of the additional IPs in the
Tel-to-IP routing table.

Any thoughts?

--Tim

----- Original Message -----
> Greetings-
> 
> First off, my apologies for the slightly OT nature of this post. It
> does involve Asterisk to a degree, but errs a bit on the side of
> Audiocodes inquiry. I accept all responsibility for my actions and the
> consequences. :)
> 
> The scenario is this: I have an Asterisk box connected to a Mediant
> 2000 (M2K) via T1. Calls made via DAHDI->T1->M2K are then routed by
> the M2K via SIP using the Audiocodes Tel-to-IP routing tables to a
> remote IP. This has worked quite well for some time.
> 
> I now want to add multiple IP's to the routing table for failover.
> However, when adding additional entries to the Tel-to-IP routing
> table, and the first entry fails, the other IPs are not attempted. The
> first IP is attempted, and if it fails, the call fails instead of
> trying any of the additional IPs in the Tel-to-IP routing table.
> 
*BUMP*

Any ideas from the brilliant folks here?

--Tim