Joost Kuif | Mobillion
2010-Sep-03 08:14 UTC
[asterisk-users] not succeeding to hide callerid with outbound calls
Hi All, In my dialplan and standard asterisk CLI logging i see that i am able to restrict the callerid when dialing out with asterisk. however, on the receiving phone, the callerid is still displayed. When i increment the logging of the pri with "pri set debug on span 1" on the CLI i also get the lower level debugging info from the pri.
Joost Kuif | Mobillion
2010-Sep-07 10:42 UTC
[asterisk-users] not succeeding to hide callerid with outbound calls
Hi, I am replying on my previous post from last friday. My pri debugging gives me other statuses as seen at the asterisk application layer! In logging below i set the CALLERPRES()=prohib in the dialplan. When the PRI is used for dialing out the followig is logged:> Calling Number (len=13) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number passed network screening (1) '30300****' ]Is this a bug? Can anyone give me some feedback on this issue? Thanks, Joost -- Executing [s at nextnode:6] Macro("SIP/joostkuif-00000014", "transfer") in new stack -- Executing [s at macro-transfer:1] NoOp("SIP/joostkuif-00000014", "macro-transfer") in new stack -- Executing [s at macro-transfer:2] NoOp("SIP/joostkuif-00000014", "inbTransfer_phoneNumber = 003164616****") in new stack -- Executing [s at macro-transfer:3] NoOp("SIP/joostkuif-00000014", "inbTransfer_ringTime = 10") in new stack -- Executing [s at macro-transfer:4] NoOp("SIP/joostkuif-00000014", "inbTransfer_presentationNumber_type = CUSTOM") in new stack -- Executing [s at macro-transfer:5] NoOp("SIP/joostkuif-00000014", "inbTransfer_presentationNumber_custom = 30300****") in new stack -- Executing [s at macro-transfer:6] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdBusy = 3") in new stack -- Executing [s at macro-transfer:7] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdNoAnswer = 3") in new stack -- Executing [s at macro-transfer:8] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdUnknownNumber = 3") in new stack -- Executing [s at macro-transfer:9] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdNoResources = 3") in new stack -- Executing [s at macro-transfer:10] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdErrorFastRepeat = 3") in new stack -- Executing [s at macro-transfer:11] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdErrorSlowRepeat = 3") in new stack -- Executing [s at macro-transfer:12] NoOp("SIP/joostkuif-00000014", "inbNextNodeIdErrorFatal = 3") in new stack -- Executing [s at macro-transfer:13] NoOp("SIP/joostkuif-00000014", "inbNodeType = transfer") in new stack -- Executing [s at macro-transfer:14] GotoIf("SIP/joostkuif-00000014", "0?none") in new stack -- Executing [s at macro-transfer:15] GotoIf("SIP/joostkuif-00000014", "0?callercli") in new stack -- Executing [s at macro-transfer:16] GotoIf("SIP/joostkuif-00000014", "6?custom") in new stack -- Goto (macro-transfer,s,32) -- Executing [s at macro-transfer:32] NoOp("SIP/joostkuif-00000014", "custom") in new stack -- Executing [s at macro-transfer:33] NoOp("SIP/joostkuif-00000014", "inbTransfer_presentationNumber_custom = 30300****") in new stack -- Executing [s at macro-transfer:34] Set("SIP/joostkuif-00000014", "CALLERID(num)=30300****") in new stack -- Executing [s at macro-transfer:35] Goto("SIP/joostkuif-00000014", "geheim") in new stack -- Goto (macro-transfer,s,25) -- Executing [s at macro-transfer:25] NoOp("SIP/joostkuif-00000014", "geheim") in new stack -- Executing [s at macro-transfer:26] NoOp("SIP/joostkuif-00000014", "voor de SET CALLERPRES() = allowed_not_screened") in new stack -- Executing [s at macro-transfer:27] NoOp("SIP/joostkuif-00000014", "CALLINGPRES = 0") in new stack -- Executing [s at macro-transfer:28] Set("SIP/joostkuif-00000014", "CALLERPRES()=prohib") in new stack -- Executing [s at macro-transfer:29] NoOp("SIP/joostkuif-00000014", "na de SET CALLERPRES() = prohib") in new stack -- Executing [s at macro-transfer:30] NoOp("SIP/joostkuif-00000014", "CALLINGPRES is nu = 35") in new stack -- Executing [s at macro-transfer:31] Goto("SIP/joostkuif-00000014", "dial") in new stack -- Goto (macro-transfer,s,36) -- Executing [s at macro-transfer:36] NoOp("SIP/joostkuif-00000014", "dial") in new stack -- Executing [s at macro-transfer:37] Dial("SIP/joostkuif-00000014", "DAHDI/g1/003164616****,10") in new stack -- Making new call for cref 32803 -- Requested transfer capability: 0x00 - SPEECH> Protocol Discriminator: Q.931 (8) len=45 > TEI=0 Call Ref: len= 2 (reference 35/0x23) (Sent from originator) > Message Type: SETUP (5) > [04 03 80 90 a3] > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) > User information layer 1: A-Law (35) > [18 03 a1 83 81] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 Preferred Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 1 Type: CPE] > [6c 0b 21 81 33 30 33 30 30 3* 3* 3* 3*] > Calling Number (len=13) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number passed network screening (1) '30300****' ] > [70 0e 80 30 30 33 31 36 34 36 31 36 3* 3* 3* 3*] > Called Number (len=16) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) '003164616****' ] > [a1] > Sending Complete (len= 1)q931.c:4877 q931_setup: Call 32803 enters state 1 (Call Initiated). Hold state: Idle -- Called g1/003164616**** < Protocol Discriminator: Q.931 (8) len=10 < TEI=0 Call Ref: len= 2 (reference 35/0x23) (Sent to originator) < Message Type: CALL PROCEEDING (2) < [18 03 a9 83 81] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 Exclusive Dchan: 0 < ChanSel: As indicated in following octets < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 1 Type: CPE] Received message for call 0x6b0f420 on 0x2aaaac07fd20 TEI/SAPI 0/0, call->pri is 0x2aaaac07fd20 TEI/SAPI 0/0 -- Processing IE 24 (cs0, Channel Identification) q931.c:6916 post_handle_q931_message: Call 32803 enters state 3 (Outgoing Call Proceeding). Hold state: Idle -- DAHDI/1-1 is proceeding passing it to SIP/joostkuif-00000014 < Protocol Discriminator: Q.931 (8) len=9 < TEI=0 Call Ref: len= 2 (reference 35/0x23) (Sent to originator) < Message Type: ALERTING (1) < [1e 02 84 88] < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the remote user (4) < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] Received message for call 0x6b0f420 on 0x2aaaac07fd20 TEI/SAPI 0/0, call->pri is 0x2aaaac07fd20 TEI/SAPI 0/0 -- Processing IE 30 (cs0, Progress Indicator) q931.c:6806 post_handle_q931_message: Call 32803 enters state 4 (Call Delivered). Hold state: Idle -- DAHDI/1-1 is ringing ________________________________________ From: asterisk-users-bounces at lists.digium.com [asterisk-users-bounces at lists.digium.com] On Behalf Of Joost Kuif | Mobillion Sent: Friday, September 03, 2010 10:14 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] not succeeding to hide callerid with outbound calls - Email found in subject Hi All, In my dialplan and standard asterisk CLI logging i see that i am able to restrict the callerid when dialing out with asterisk. however, on the receiving phone, the callerid is still displayed. When i increment the logging of the pri with "pri set debug on span 1" on the CLI i also get the lower level debugging info from the pri.