I have a rather simple setup running under Asterisk 1.4. I'd like to move it to a new install of 1.6. Before I bring it online are there any gotchas I should look for? A Gotcha README would be better but searching with Google and the forums, for me, gets hits that deal with hardware issues -- cards etc. Nothing about depreciated/changed commands. TIA, Rod --
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Roderick A. Anderson Subject: [asterisk-users] Using a 1.4 config with 1.6 I have a rather simple setup running under Asterisk 1.4. I'd like to move it to a new install of 1.6. Before I bring it online are there any gotchas I should look for? TIA, Rod I am doing dual testing with 1.4.3X and 1.6X and the only thing that has hit me so far is having to change the dialplan delimiters (from "|" to ",") If your dialplan is simple enough, this may not affect you at all.
On Fri, Aug 6, 2010 at 10:36 AM, Roderick A. Anderson <raanders at cyber-office.net> wrote:> I have a rather simple setup running under Asterisk 1.4. ?I'd like to > move it to a new install of 1.6. ?Before I bring it online are there any > gotchas I should look for? ?A Gotcha README would be better but > searching with Google and the forums, for me, gets hits that deal with > hardware issues -- cards etc. ?Nothing about depreciated/changed commands. >Be sure to read CHANGES and UPGRADE.txt within the source directory of Asterisk. -- Paul Belanger | dCAP Polybeacon | Consultant Jabber: paul.belanger at polybeacon.com | IRC: pabelanger (Freenode) blog.polybeacon.com