Hi, Is it possible to create a meet me room on the go through dial plan? I am looking to use AMI Originate to drop a call into meetme room and once it's proved that party is joined, play him an announcement, grab few numbers from them, and then dial a second number and drop into the same meetme room. The reason to use this is to be able to know when the channels connected because both parties being called are done through a third party SIP provider. 1- So, I am looking to use 100s of calls to connect at with each two party connected to each other. I guess I need 50 meetme rooms for 100 callees?! 2- And, is it possible to create those meetme rooms on the go from within my context via dialplan? or is there a better approach that I should take? Thanks, Bruce -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091223/20812340/attachment.htm
Danny Nicholas
2009-Dec-24 14:23 UTC
[asterisk-users] How to create MeetME room with dialplan?
Whether you can do this and how successfully depends on your Asterisk Flavor. Meetme has no internal limitation that would allow you to limit the meetme to two callers. IMO you would have better luck using a bank of pre-defined meetme rooms, but you can set up as many as you want "on the fly" from the dialplan. The approach I would take to this is this Caller A calls in - he is assigned to pre-defined room x. AMI then calls caller B and dumps him/her into room x. You could use the Asterisk DB or MYSQL to track rooms by caller. _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bruce Nik Sent: Wednesday, December 23, 2009 10:53 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] How to create MeetME room with dialplan? Hi, Is it possible to create a meet me room on the go through dial plan? I am looking to use AMI Originate to drop a call into meetme room and once it's proved that party is joined, play him an announcement, grab few numbers from them, and then dial a second number and drop into the same meetme room. The reason to use this is to be able to know when the channels connected because both parties being called are done through a third party SIP provider. 1- So, I am looking to use 100s of calls to connect at with each two party connected to each other. I guess I need 50 meetme rooms for 100 callees?! 2- And, is it possible to create those meetme rooms on the go from within my context via dialplan? or is there a better approach that I should take? Thanks, Bruce -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091224/e72ba47e/attachment.htm