Alexandre Rodrigues
2009-Dec-02 22:02 UTC
[asterisk-users] Rsrvd state and off hook dahdi issue
Hello all, I have asterisk 1.4.26.2 working on linux CentOS 2.6.18 with a dahdi driver 2.2.0.2 and Digium Wildcard AEX410. I configured 3 ports of 4 all fxs. The port 1 is connected to a analogue phone, the port 3 and 4 are connected to two analogue faxes. dahdi-channels.conf: ;;; line="1 WCTDM/0/0 FXOKS" threewaycalling=yes transfer=yes signalling=fxo_ks callerid="John Doe" <1234> callgroup=1 pickupgroup=1 context=national_mobile channel => 1 ;;; line="3 WCTDM/0/2 FXOKS" threewaycalling=no transfer=no signalling=fxo_ks callerid=FAX Three callgroup pickupgroup context=national_landline channel => 3 ;;; line="4 WCTDM/0/3 FXOKS" threewaycalling=no transfer=no signalling=fxo_ks callerid=FAX RH callgroup pickupgroup context=national_landline channel => 4 the system.conf file: fxoks=1 echocanceller=mg2,1 fxoks=2 echocanceller=mg2,2 fxoks=3 echocanceller=mg2,3 fxoks=4 echocanceller=mg2,4 # Global data loadzone = pt defaultzone = pt Some times the the fxs lines stays off hook permanently, with the state reserved. I tried to do a soft hangup with no results. The only thing that works is to restart the dahdi drivers. Anyone has an idea of how to resolve this?? Thanks in advance, Alex
Alexandre Rodrigues
2009-Dec-04 15:33 UTC
[asterisk-users] Rsrvd state and off hook dahdi issue
Hello again, Adding more information: Core show channels: Channel Location State Application(Data) DAHDI/4-1 s at national_mobile:1 Rsrvd (None) DAHDI/1-1 s at national_mobile:1 Rsrvd (None) Dahdi show channels: Chan Extension Context Language MOH Interpret pseudo default default 1 national_mobile pt default 3 national_mobile pt default 4 national_mobile pt default Thanks in advance, Alex
Alexandre Rodrigues
2009-Dec-17 17:16 UTC
[asterisk-users] Rsrvd state and off hook dahdi issue
Has anyone an idea of why is this happening???? The problem usually happens when I have a fax connected to a fxs line. I tried many "adaptation", of the dahdi configuration, but the problem persists. I am starting to think I have a hardware problem with the Digium Board. Can anyone recommend me a good analogue FXS card without the off hook state problem??? Thanks in advance. Alex 2009/12/4 Alexandre Rodrigues <alex454 at gmail.com>> Hello again, > > Adding more information: > > Core show channels: > > Channel Location State Application(Data) > DAHDI/4-1 s at national_mobile:1 Rsrvd (None) > DAHDI/1-1 s at national_mobile:1 Rsrvd (None) > > Dahdi show channels: > > Chan Extension Context Language MOH Interpret > pseudo default > default > 1 national_mobile pt > default > 3 national_mobile pt > default > 4 national_mobile pt default > > > > Thanks in advance, > > Alex >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091217/29baa7bc/attachment.htm
On Fri, Dec 04, 2009 at 03:33:00PM +0000, Alexandre Rodrigues wrote:> Hello again, > > Adding more information: > > Core show channels: > > Channel Location State Application(Data) > DAHDI/4-1 s at national_mobile:1 Rsrvd (None) > DAHDI/1-1 s at national_mobile:1 Rsrvd (None)This means that in those two ports (port 1 and port 4) you have a phone that is off-hook. If this is not the case, the detection of off-hook is incorrect somewhere along the way (wctdm24xxp / dahdi / chan_dahdi). -- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
Alexandre Rodrigues
2009-Dec-17 18:01 UTC
[asterisk-users] Rsrvd state and off hook dahdi issue
Hello Tzafrir Cohen, First of all thanks for the reply. :) The fax normally works. But two or tree times a month it goes to this state. One time, with the state offhook, I disconnect the fax line and connected a phone. The result was the same, it stays offhook. Can it be some strange electrical problem that happens occasionally that trigers this jammed state?? Thanks Alex 2009/12/17 Tzafrir Cohen <tzafrir.cohen at xorcom.com>> On Fri, Dec 04, 2009 at 03:33:00PM +0000, Alexandre Rodrigues wrote: > > Hello again, > > > > Adding more information: > > > > Core show channels: > > > > Channel Location State > Application(Data) > > DAHDI/4-1 s at national_mobile:1 Rsrvd (None) > > DAHDI/1-1 s at national_mobile:1 Rsrvd (None) > > This means that in those two ports (port 1 and port 4) you have a phone > that is off-hook. > > If this is not the case, the detection of off-hook is incorrect > somewhere along the way (wctdm24xxp / dahdi / chan_dahdi). > > -- > Tzafrir Cohen > icq#16849755 jabber:tzafrir.cohen at xorcom.com<jabber%3Atzafrir.cohen at xorcom.com> > +972-50-7952406 mailto:tzafrir.cohen at xorcom.com > http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091217/4b5e7b66/attachment.htm
Danny Nicholas
2009-Dec-17 18:06 UTC
[asterisk-users] Rsrvd state and off hook dahdi issue
It could be a "bad" wire from the fax to the TDM card that registers as "off-hook". If you move the fax to a different port on the card, does the condition follow it? _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Alexandre Rodrigues Sent: Thursday, December 17, 2009 12:02 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Rsrvd state and off hook dahdi issue Hello Tzafrir Cohen, First of all thanks for the reply. :) The fax normally works. But two or tree times a month it goes to this state. One time, with the state offhook, I disconnect the fax line and connected a phone. The result was the same, it stays offhook. Can it be some strange electrical problem that happens occasionally that trigers this jammed state?? Thanks Alex 2009/12/17 Tzafrir Cohen <tzafrir.cohen at xorcom.com> On Fri, Dec 04, 2009 at 03:33:00PM +0000, Alexandre Rodrigues wrote:> Hello again, > > Adding more information: > > Core show channels: > > Channel Location StateApplication(Data)> DAHDI/4-1 s at national_mobile:1 Rsrvd (None) > DAHDI/1-1 s at national_mobile:1 Rsrvd (None)This means that in those two ports (port 1 and port 4) you have a phone that is off-hook. If this is not the case, the detection of off-hook is incorrect somewhere along the way (wctdm24xxp / dahdi / chan_dahdi). -- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com <mailto:jabber%3Atzafrir.cohen at xorcom.com> +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091217/5b1be537/attachment.htm
Alexandre Rodrigues
2009-Dec-17 18:31 UTC
[asterisk-users] Rsrvd state and off hook dahdi issue
Yes, It happens also, I am having this problem in many servers with different boards, asterisk versions and drivers (zap and dahdi). Sometimes in one month it is all fine in the other I get a lot of this off hook states. 2009/12/17 Danny Nicholas <danny at debsinc.com>> It could be a ?bad? wire from the fax to the TDM card that registers as > ?off-hook?. If you move the fax to a different port on the card, does the > condition follow it? > > > ------------------------------ > > *From:* asterisk-users-bounces at lists.digium.com [mailto: > asterisk-users-bounces at lists.digium.com] *On Behalf Of *Alexandre > Rodrigues > *Sent:* Thursday, December 17, 2009 12:02 PM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion > *Subject:* Re: [asterisk-users] Rsrvd state and off hook dahdi issue > > > > Hello Tzafrir Cohen, > > First of all thanks for the reply. :) > > > The fax normally works. But two or tree times a month it goes to this > state. One time, with the state offhook, I disconnect the fax line and > connected a phone. The result was the same, it stays offhook. > > Can it be some strange electrical problem that happens occasionally that > trigers this jammed state?? > > Thanks > Alex > > > 2009/12/17 Tzafrir Cohen <tzafrir.cohen at xorcom.com> > > On Fri, Dec 04, 2009 at 03:33:00PM +0000, Alexandre Rodrigues wrote: > > Hello again, > > > > Adding more information: > > > > Core show channels: > > > > Channel Location State > Application(Data) > > DAHDI/4-1 s at national_mobile:1 Rsrvd (None) > > DAHDI/1-1 s at national_mobile:1 Rsrvd (None) > > This means that in those two ports (port 1 and port 4) you have a phone > that is off-hook. > > If this is not the case, the detection of off-hook is incorrect > somewhere along the way (wctdm24xxp / dahdi / chan_dahdi). > > -- > Tzafrir Cohen > icq#16849755 jabber:tzafrir.cohen at xorcom.com<jabber%3Atzafrir.cohen at xorcom.com> > +972-50-7952406 mailto:tzafrir.cohen at xorcom.com > http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091217/a4bb100b/attachment.htm