It might be worth mentioning the voip call is coming from a number we
have thru bandwidth.com in case anyone uses them.
James Shigley
From: James A. Shigley
Sent: Wednesday, December 02, 2009 3:06 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] Variable Name needed
That wasn't it either. I tried a few other likely fields from that page
none of which gave the correct data
James Shigley
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Danny
Nicholas
Sent: Wednesday, December 02, 2009 2:20 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Variable Name needed
According to this link
http://www.voip-info.org/wiki/view/Asterisk+Detailed+Variable+List I'd
go with ${SIPCALLID}
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of James A.
Shigley
Sent: Wednesday, December 02, 2009 2:06 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Variable Name needed
Other than having stripping out IPs this is what I am receiving for my
voip calls. Now I normally use ${CALLERID(rdnis) for RDNIS, this works
fine calls that come in on my PRI. BUT at least from this VOIP source
the To field which is my RDNIS information for these calls, doesn't
actually fill into ${CALLERID(rdnis). But as you can see I'm getting the
information.
My question is, Does anyone know what variable I would use to get the
information for "To" from these SIP calls, the below is the actual SIP
packet obtained from the CLI with SIP Debug On. Other than I stripped
out the IPs
<--- Transmitting (no NAT) to:5060 --->
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP;branch=z9hG4bK6631.98b11517.0;received
Via: SIP/2.0/UDP;branch=z9hG4bK6631.f18e9a97.0
Via: SIP/2.0/UDP :5060;branch=z9hG4bK506071629460-1256675031807
Record-Route: <sip:;lr;ftag=VPSF506071629460>
Record-Route: <sip:;lr;ftag=VPSF506071629460>
From: "BEAUMONT TX"
<sip:+14096798092@;isup-oli=0>;tag=VPSF506071629460
To: <sip:+14098383113@>;tag=as4b59d217
Call-ID: DALMGC0520091202194656056692@
CSeq: 1 INVITE
User-Agent: Asterisk PBX 1.6.0.6
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces, timer
Contact: <sip:+14092933193@>
Content-Length: 0
<------------>
Thank You for your time, and I apologize if this is a repeat question. I
did Google, and search thru my * email archive (back thru April 09) for
an answer first.
James Shigley
Monroe Telephone Answering Service
409-981-9213
Infinity 5.51,UC 4.02.3803, Blink 3.0.104
Ecreator:2.21, eResponse 1.1.7
Webportal,WebApps,
CONFIDENTIALITY NOTICE: This email, including any attachments, contains
information which may be confidential or privileged. The information =is
intended to be for the use of the individual or entity named above. If
you are not the intended recipient, be aware that any disclosure,
copying, distribution or use of the contents of this information is
prohibited. If you have received this email in error, please notify the
sender immediately by "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20091202/db5f0089/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 5478 bytes
Desc: image001.jpg
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20091202/db5f0089/attachment.jpeg
