asterisk users - Oct 2009 - delay to dial

Hello all,

 

Is there anyway that I can configure Asterisk to start dialing out from fxo
after (xx) seconds from getting the dial tone? I don't want tdm card to send
the number immediately because it  fails many times.

 

Thanks for any help.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20091010/69b8e84e/attachment.htm

B.Masoud @ SH wrote:
>
> Hello all,
>
> Is there anyway that I can configure Asterisk to start dialing out 
> from fxo after (xx) seconds from getting the dial tone? I don?t want 
> tdm card to send the number immediately because it fails many times.
>
You can use the w. This is from the wiki:

If you need a .5 second pause while dialing a number you can insert a 
*w* in the appropriate place.

Example:

exten => _5XXX,n,Dial(ZAP/G1/w1269xxxxxxxw${EXTEN}${CALLERID(number)})


This dials out G1, waits 1/2 second, dials the phone number and then 
waits 1/2 second again and then dial the extension along with the 
callerid number.

Doug


-- 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."