> > Funny. The first thing I always do after a reboot is call in from my > cell to make sure things work. But last night I rebooted and immediately > tried dialing out (with a TDM842B) and got: > > WARNING[2720]: app_dial.c:1721 dial_exec_full: Unable to create channel of > type 'DAHDI' (cause 34 - Circuit/channel congestion) > > Restarting all of Asterisk or 'dahdi restart' didn't matter. Neither FXO > card would make an outgoing call until it had received an incoming one. > This with DAHDI 2.2.0.2. >I am getting this also. My configuration is on a PRI running qsig. lines 1-23 and dchannel is 24. service dahdi stop and service dahdi start did not work. rebooting the server is the only thing that worked. This seems to happen about 3 weeks after we have been running for a while. (approximate time) First I thought it was just a fluke thing- but now I see others having this issue also. I am running all the latest. DAHDI 2.2.0 libpri 1.4.10.1 asterisk 1.4.26.2 Any ideas? Jerry
I also found this weird, I thought my equipment was the problem. Good to know about this issue so, Digium takes care of the problem. I'm running: asterisk-1.6.1.5 dahdi-linux-2.2.0.2 libpri-1.4.10.1
A user report that this issue: https://issues.asterisk.org/view.php?id=15429 Has resolved their problem with a TDM card. My card is a T1/PRI card. Different module to load. I have the same issue. Does this same problem exist in the PRI code and needs fixed their also? Has it been fixed? and does this issue warrant a new release? Thanks, Jerry