asterisk users - Feb 2008 - TDM400P phone won't ring

Shane Wegner wrote:
> Hello all,
> 
> I have two handsets connected to FXS ports on a TDM400P,
> both GE models but one rings and the other does not.  The
> phone models are not identical.  The phone which doesn't
> ring on the TDM does ring when connected to a regular POTS
> line and I tried connecting another phone to the port and
> it rings fine.
Do you have the power connector on the TDM400P card hooked up?

Steve

Have you swapped the phones between the FXS ports to see if the phone rings?

Moj

Shane Wegner wrote:
> Hello all,
>
> I have two handsets connected to FXS ports on a TDM400P,
> both GE models but one rings and the other does not.  The
> phone models are not identical.  The phone which doesn't
> ring on the TDM does ring when connected to a regular POTS
> line and I tried connecting another phone to the port and
> it rings fine.
>
> So, I'm presuming the TDM is ringing the handsets somehow
> differently than the telco in a way which most phones like
> but this particular one doesn't deal with.  On the wctdm
> module I've tried ringboost=1 and fastringer=1 but neither
> made a difference, not that fastringer=1 should as I'm in
> Canada where we use 20HZ I believe.  Just wondering if
> there are any other settings in the Zaptel modules or
> Asterisk to change the ring properties.
>
> Best,
> Shane
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>