asterisk users - Jan 2008 - Problem picking up a call with PickUpChan or PickUp

Hi,

I have configured my SNOM 360 to monitor another extension by setting 
the following:

[default]
exten => user1,hint,SIP/user1

The next step was to define a function key on the phone as an extension 
with the value <sip:user1 at 192.168.0.101> and later with 
<sip:user1 at 192.168.0.101|*8>

When someone now calls extension 97 (which is the number of the 
corresponding phone), the LED on the SNOM 360 starts flashing.

According to the documentation in the wiki 
(http://www.voip-info.org/wiki-Asterisk+phone+snom)
I have tested a number of configurations on the phone, e.g.

exten => _*8.,1,PickUpChan(SIP/user1)

But all I get is a flashing LED, when I press the key, the display tells 
me "connected", but the phone isn't connected and I don't get
any
message on the cli (debug level 5). Since I

I' m using Asterisk 1.4.17-BRIstuffed-0.4.0-test6

Does anyone of you has a working configuration with SNOM phones that are 
able to pickup a call from a flasing LED?

Thanks for your help,

Stefan
-- 

********************************************
in-put GbR - Das Linux-Systemhaus
Stefan-Michael Guenther
Geschaeftsfuehrer
Moltkestrasse 49     D-76133 Karlsruhe
Tel./Fax : +49 (0)721 / 83044 - 98/93
http://www.in-put.de
********************************************
      Schulungen  Installationen
          Beratung   Support
       Voice-over-IP-Loesungen
********************************************