similar to: Problem picking up a call with PickUpChan or PickUp

Paul Madley wrote > >Unfortunately (as far as I'm aware) this is a bug in the 1.4.17 >release, and therefore I don't think any config changes will fix it. >We've been told to roll back to our previous 1.4.13 installation. It >also seems to manifest itself in "ghost ringing" as I've called it; >place a call to a SIP extension, then put down the

Hi, according to the description of Pickup() on page http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup I can use this command to pickup a call at a certain extensions. When I try this with e.g. exten => *8200,1,Pickup(200) Asterisk tells me that the highest value for the Pickup command is 63. Wenn I enter the number of a callgroup instead of an extension, I can pickup the call.

Hi, I'm using an Aastra 57i together with Asterisk 1.4.13. The 57i is configured for call pickup as recommended by Aastra. When the LED flashes, I press the corresponding button and the display tells me "Call not possible". In the CLI is see the follwoing output. Why isn't the call transfered to user2 and what does "No target channel found for 31 mean"? User2 can

Hi, I' still fighting the problem, that I can talk from one SIP phone to another, but I can't hear the output of the playback or similar applications: exten => 202,1,ANSWER() exten => 202,2,PLAYBACK(tt-monkeys) exten => 202,3,HANGUP() When I dial 202, asterisk show the following on the cli: -- Executing [202 at local:1]

Hi, > Does anyone of you has a working configuration with SNOM phones that are > able to pickup a call from a flasing LED? Unfortunately (as far as I'm aware) this is a bug in the 1.4.17 release, and therefore I don't think any config changes will fix it. We've been told to roll back to our previous 1.4.13 installation. It also seems to manifest itself in "ghost

Hi, when I pick up a call with *8, the number of the caller isn't show on the phone that picked up the call. Is there a way/chance to keep or transfer the number of the caller? We are currently using Asterisk version 1.4.1. Thanks for any hints, Stefan -- ******************************************** in-put GbR - Das Linux-Systemhaus Stefan-Michael Guenther Moltkestrasse 49 D-76133

Hi, is anyone on the list using the Siemens Openstage phones together with asterisk? If yes, is it possible to use the programmable keys of these phones together with Asterisk? Thanks for any hints, Stefan -- ******************************************** in-put GbR - Das Linux-Systemhaus Stefan-Michael Guenther Moltkestrasse 49 D-76133 Karlsruhe Tel./Fax : +49 (0)721 / 83044 - 98/93

Hello, on my ISDN phone I can configure that on the next outgoing call, my telephone number should not be transmitted, instead it should be UNKNOWN. How can I configure Asterisk to do the same? Is this a feature/parameter of the driver (chan_capi) that I'm using? BTW: I'm using ISDN and Deutsche Telekom, if the provider makes any difference. Thanks for your help, Stefan --

Hello, I have setup an Asterisk 1.2.7.1 system, with a working voicemail box: /etc/asterisk/extensions.conf exten => 83086921,1,Answer exten => 83086921,2,Dial(SIP/stefan,5,r) exten => 83086921,3,VoiceMail,u111 exten => 83086921,4,Hangup exten => 83086921,103,VoiceMail,b111 exten => 83086921,104,Hangup /etc/asterisk/voicemail.conf [default] language=de 111 =>

Hi, I have a strange problem with our Asterisk installation. Outgoing calls are handled by the following lines: exten => _0[2-9]X.,1,Set(CALLERID(num)=09999403${CALLERID(num)}) exten => _0[2-9]X.,2,SET(CALLERID(num)=${IF($[ ${CALLERID(num)} = 0999940321]?099994030:${CALLERID(num)})}) exten => _0[2-9]X.,3,DIAL(CAPI/g1/${CALLERID(num)}:${EXTEN},180,tr) exten =>

Paul wrote > >;Pause/unpause Queue >exten => 424,1,PauseQueueMember(|SIP/${CALLERID(num)}) >exten => 424,2,Playback(unavailable) >exten => 424,3,Hangup >exten => 425,1,UnPauseQueueMember(|SIP/${CALLERID(num)}) >exten => 425,2,Playback(available) >exten => 425,3,Hangup > Following your suggestion and a number of postings and articles I have

Hello, I have read the articles on echo cancellation (http://www.voip-info.org/wiki/view/Asterisk), but couldn't find a solution to my problem. We are running Asterisk 1.4.12 together with an EICON DIVA SERVER BRI-2M PCI (current driver from EICON) and some SNOM 300/360. There are few clients where we recognize echoes on both sides when we call them via ISDN. With some of these clients we

Hello, I have a strange situation: I can talk to other SIP phones and via ISDN to the outside, but I don't hear playbacks or the voicemail messages. Asterisk show in the cli, that the corresponding files are played, but I hear nothing at all. Here is as simple example: [monkeys] ??? exten => 99,1,ANSWER() ??? exten => 99,2,PLAYBACK(tt-monkeys) ??? exten => 99,3,HANGUP() The phone

Hello, I have setup an Asterisk 1.2.7.1 system, with a working voicemail box: /etc/asterisk/extensions.conf exten => 83086921,1,Answer exten => 83086921,2,Dial(SIP/stefan,5,r) exten => 83086921,3,VoiceMail,u111 exten => 83086921,4,Hangup exten => 83086921,103,VoiceMail,b111 exten => 83086921,104,Hangup /etc/asterisk/voicemail.conf [default] language=de 111 =>

Hi, according to the wiki the value NOANSWER for the channel variable DIALSTATUS means: No answer. The dial command reached its number, the number rang for too long, then the dial timed out. In out dialplan we grap all these events with exten => s-NOANSWER,1,Playback(sometext) exten => s-NOANSWER,2,WAIT(1) exten => s-NOANSWER,3,Hangup() The dial commands for internal and external

Hi, on one of our clients asterisk server we have the problem that you hear nothing on external calls. Here are the details abount the system: Asterisk 1.6.0.22 DIGIUM Wildcard B410 quad-BRI card (rev 01) dahdi-linux-complete-2.2.0+2.2.0 I have setup the following test extension: exten => 9216992,1,ANSWER() exten => 9216992,2,WAIT(2) exten =>

Hi, has anyone already set up a configuration between the doorbell Siedle DCA 612 and an Asterisk Server? I have used a Grandstream HT 286 to connect the doorbell and the asterisk. When I press the button, the phone ring and when I pick up the call I hear a beeping. At the door I hear nothing. According to the wiki, this doorbell should work with Asterisk, but I haven't found a dialplan

Hello, >> > I can talk to other SIP phones and via ISDN to the outside, but I >> >don't hear playbacks or the voicemail messages. >> > Asterisk show in the cli, that the corresponding files are played, >> >but I hear nothing at all. >> > >> > Here is as simple example: >> > >> > [monkeys] >> > exten =>

Hello, I have read the articles on echo cancellation (http://www.voip-info.org/wiki/view/Asterisk), but couldn't find a solution to my problem. We are running Asterisk 1.4.12 together with an EICON DIVA SERVER BRI-2M PCI (current driver from EICON) and some SNOM 300/360. There are few clients where we recognize echoes on both sides when we call them via ISDN. With some of these clients

Hi, > >... > >drivers/isdn/capi/kcapi.c:1014:47: error: macro "INIT_WORK" passed 3 > >arguments, but takes just 2 > >make[2]: *** [drivers/isdn/capi/kcapi.o] Error 1 > >make[1]: *** [drivers/isdn/capi] Error 2 > >make: *** [_module_drivers/isdn] Error 2 > >#+ LOG INFO: pwd:/usr/lib/eicon/divas/src > >#! LOG ABORT EXECUTION DUE TO