All,
I'm using a Digium TE410P w/ Asterisk 1.2.18. Trying to connect it to our
NACT STX switch via PRI, d channel is up, T1 shows normal, but I'm getting
crazy errors. I rewired this thing three times, then I connected the same cable
from the STX to a Cisco AS5300 (same pri settings as asterisk), and all slip
events and frame sync errors went away, so the cable is good.
STX --> DSX Panel -->Asterisk
I've confrimed all wiring is good, not sure what the issue is, tried playing
with the clock source as well, but no dice. Any ideas?
Errors:
CRC Errors
Frame Sync Errors
Slip Events
1 Error every second
Zaptel.conf
loadzone = us
defaultzone = us
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
span=3,3,0,esf,b8zs
span=4,4,0,esf,b8zs
bchan=1-23
dchan=24
bchan=25-47
dchan=48
bchan=49-71
dchan=72
bchan=73-95
dchan=96
TIA,
Jon Weisman | Sales Engineer
International Bell Communications
www.ibell.net
www.ibellhost.com
www.aeronhelpdesk.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070626/a401faa0/attachment.htm
