Dear All
I have a problem with a TDM400 card with 4 x FXS modules.
The card carries extensions only and there are no incoming lines.
I can make a call to the extension on this card with no problems.
However, when I try and call out I just get a busy signal.
I also get an error message (as shown at the bottom). Is this a problem?
Configs below:
[root at asterisk etc]# more zaptel.conf
fxoks=1-4
loadzone=uk
defaultzone=uk
[root at asterisk asterisk]# more zapata.conf
[trunkgroups]
;define trunks here
[channels]
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
immediate=no
;define channels
context=dialphone
signalling=fxo_ks
cidsignalling=v23 ; Added for UK CLI detection
cidstart=polarity
usecallerid=yes
channel => 1-4
[root at asterisk asterisk]# more extensions.conf
[general]
static=yes
writeprotect=yes
;
[globals]
FAX1 = Zap/1
FAX2 = Zap/2
STREAMLINE1 = Zap/3
STREAMLINE2 = Zap/4
CUSTSERVE1 = SIP/401 ;Teresa
CUSTSERVE2 = SIP/402 ; Louise
;CUSTSERVE3 = SIP/404 ; Helen
QUAD1 = SIP/451 ; Matt
QUAD2 = SIP/452 ; Johan
CUSTSERVE = CUSTSERVE1&CUSTSERVE1
;
FSEXT1 = SIP/400 ; Angela
;FSEXT2 = SIP/403 ; Nigel
FSEXT3 = SIP/410 ; Matt
;
;ELLIS = SIP/411
;QUEENS = SIP/412
;FSSHOPS = ELLIS&QUEENS
;
QUAD = SIP/450
;
LONDONSOLE1 = SIP/421 ; Zoe
;LONDONSOLE2 = SIP/422 ; Laura
;LONDONSOLE = LONDONSOLE1&LONDONSOLE2
;
;PRESS1 = SIP/431 ; Lucy
;PRESS2 = SIP/432 ; Gemma
;PRESSOFFICE = PRESS1&PRESS2
;
[macro-oneline]
exten => s,1,Dial(${ARG1},20,t)
exten => s,2,Voicemail(u${MACRO_EXTEN})
exten => s,3,Hangup
exten => s,102,Voicemail(b${MACRO_EXTEN})
exten => s,103,Hangup
;
[macro-oneline1]
exten => s,1,Dial(${ARG1},20,t)
exten => s,2,Voicemail(u${ARG2})
exten => s,3,Hangup
exten => s,102,Voicemail(b${ARG2})
exten => s,103,Hangup
;
;
[default]
;setupdial out
;
;test dialplan
exten => _9xxx,1,SayDigits(${EXTEN:1})
;
;setup the phone extensions
exten => 400,1,Macro(oneline,${FSEXT1})
exten => 401,1,Macro(oneline,${CUSTSERVE1})
exten => 402,1,Macro(oneline,${CUSTSERVE2})
exten => 410,1,Macro(oneline,${FSEXT3})
exten => 421,1,Macro(oneline,${LONDONSOLE1})
exten => 450,1,Macro(oneline,${QUAD})
exten => 451,1,Macro(oneline,${QUAD1})
exten => 452,1,Macro(oneline,${QUAD2})
;
exten => 1000,1,Macro(oneline,${CUSTSERVE})
;exten => 2000,1,Macro(oneline,${FSSHOPS})
;exten => 3000,1,Macro(oneline,${PRESSOFFICE})
;
[dialphone]
exten => 601,1,Macro(oneline,${FAX1})
;
asterisk*CLI> reload chan_zap.so
-- Reloading module 'chan_zap.so' (Zapata Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
[Jun 21 10:24:26] WARNING[29786]: chan_zap.c:11072 process_zap: Ignoring
signalling
-- Reconfigured channel 1, FXO Kewlstart signalling
-- Reconfigured channel 2, FXO Kewlstart signalling
-- Reconfigured channel 3, FXO Kewlstart signalling
-- Reconfigured channel 4, FXO Kewlstart signalling
== Parsing '/etc/asterisk/users.conf': Found
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070621/178af664/attachment.htm
Dear All
I have a problem with a TDM400 card with 4 x FXS modules.
The card carries extensions only and there are no incoming lines.
I can make a call to the extension on this card with no problems.
However, when I try and call a different extension I just get a busy signal.
I also get an error message (as shown at the bottom). Is this a problem?
Configs below:
[root at asterisk etc]# more zaptel.conf
fxoks=1-4
loadzone=uk
defaultzone=uk
[root at asterisk asterisk]# more zapata.conf
[trunkgroups]
;define trunks here
[channels]
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
immediate=no
;define channels
context=dialphone
signalling=fxo_ks
cidsignalling=v23 ; Added for UK CLI detection
cidstart=polarity
usecallerid=yes
channel => 1-4
[root at asterisk asterisk]# more extensions.conf
[general]
static=yes
writeprotect=yes
;
[globals]
FAX1 = Zap/1
FAX2 = Zap/2
STREAMLINE1 = Zap/3
STREAMLINE2 = Zap/4
CUSTSERVE1 = SIP/401 ;Teresa
CUSTSERVE2 = SIP/402 ; Louise
;CUSTSERVE3 = SIP/404 ; Helen
QUAD1 = SIP/451 ; Matt
QUAD2 = SIP/452 ; Johan
CUSTSERVE = CUSTSERVE1&CUSTSERVE1
;
FSEXT1 = SIP/400 ; Angela
;FSEXT2 = SIP/403 ; Nigel
FSEXT3 = SIP/410 ; Matt
;
;ELLIS = SIP/411
;QUEENS = SIP/412
;FSSHOPS = ELLIS&QUEENS
;
QUAD = SIP/450
;
LONDONSOLE1 = SIP/421 ; Zoe
;LONDONSOLE2 = SIP/422 ; Laura
;LONDONSOLE = LONDONSOLE1&LONDONSOLE2
;
;PRESS1 = SIP/431 ; Lucy
;PRESS2 = SIP/432 ; Gemma
;PRESSOFFICE = PRESS1&PRESS2
;
[macro-oneline]
exten => s,1,Dial(${ARG1},20,t)
exten => s,2,Voicemail(u${MACRO_EXTEN})
exten => s,3,Hangup
exten => s,102,Voicemail(b${MACRO_EXTEN})
exten => s,103,Hangup
;
[macro-oneline1]
exten => s,1,Dial(${ARG1},20,t)
exten => s,2,Voicemail(u${ARG2})
exten => s,3,Hangup
exten => s,102,Voicemail(b${ARG2})
exten => s,103,Hangup
;
;
[default]
;setupdial out
;
;test dialplan
exten => _9xxx,1,SayDigits(${EXTEN:1})
;
;setup the phone extensions
exten => 400,1,Macro(oneline,${FSEXT1})
exten => 401,1,Macro(oneline,${CUSTSERVE1})
exten => 402,1,Macro(oneline,${CUSTSERVE2})
exten => 410,1,Macro(oneline,${FSEXT3})
exten => 421,1,Macro(oneline,${LONDONSOLE1})
exten => 450,1,Macro(oneline,${QUAD})
exten => 451,1,Macro(oneline,${QUAD1})
exten => 452,1,Macro(oneline,${QUAD2})
;
exten => 1000,1,Macro(oneline,${CUSTSERVE})
;exten => 2000,1,Macro(oneline,${FSSHOPS})
;exten => 3000,1,Macro(oneline,${PRESSOFFICE})
;
[dialphone]
exten => 601,1,Macro(oneline,${FAX1})
;
asterisk*CLI> reload chan_zap.so
-- Reloading module 'chan_zap.so' (Zapata Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
[Jun 21 10:24:26] WARNING[29786]: chan_zap.c:11072 process_zap: Ignoring
signalling
-- Reconfigured channel 1, FXO Kewlstart signalling
-- Reconfigured channel 2, FXO Kewlstart signalling
-- Reconfigured channel 3, FXO Kewlstart signalling
-- Reconfigured channel 4, FXO Kewlstart signalling
== Parsing '/etc/asterisk/users.conf': Found
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070621/a67e311e/attachment.htm