Dear All I have a problem with a TDM400 card with 4 x FXS modules. The card carries extensions only and there are no incoming lines. I can make a call to the extension on this card with no problems. However, when I try and call out I just get a busy signal. I also get an error message (as shown at the bottom). Is this a problem? Configs below: [root at asterisk etc]# more zaptel.conf fxoks=1-4 loadzone=uk defaultzone=uk [root at asterisk asterisk]# more zapata.conf [trunkgroups] ;define trunks here [channels] usecallerid=yes hidecallerid=no callwaiting=no threewaycalling=yes transfer=yes echocancel=yes echotraining=yes immediate=no ;define channels context=dialphone signalling=fxo_ks cidsignalling=v23 ; Added for UK CLI detection cidstart=polarity usecallerid=yes channel => 1-4 [root at asterisk asterisk]# more extensions.conf [general] static=yes writeprotect=yes ; [globals] FAX1 = Zap/1 FAX2 = Zap/2 STREAMLINE1 = Zap/3 STREAMLINE2 = Zap/4 CUSTSERVE1 = SIP/401 ;Teresa CUSTSERVE2 = SIP/402 ; Louise ;CUSTSERVE3 = SIP/404 ; Helen QUAD1 = SIP/451 ; Matt QUAD2 = SIP/452 ; Johan CUSTSERVE = CUSTSERVE1&CUSTSERVE1 ; FSEXT1 = SIP/400 ; Angela ;FSEXT2 = SIP/403 ; Nigel FSEXT3 = SIP/410 ; Matt ; ;ELLIS = SIP/411 ;QUEENS = SIP/412 ;FSSHOPS = ELLIS&QUEENS ; QUAD = SIP/450 ; LONDONSOLE1 = SIP/421 ; Zoe ;LONDONSOLE2 = SIP/422 ; Laura ;LONDONSOLE = LONDONSOLE1&LONDONSOLE2 ; ;PRESS1 = SIP/431 ; Lucy ;PRESS2 = SIP/432 ; Gemma ;PRESSOFFICE = PRESS1&PRESS2 ; [macro-oneline] exten => s,1,Dial(${ARG1},20,t) exten => s,2,Voicemail(u${MACRO_EXTEN}) exten => s,3,Hangup exten => s,102,Voicemail(b${MACRO_EXTEN}) exten => s,103,Hangup ; [macro-oneline1] exten => s,1,Dial(${ARG1},20,t) exten => s,2,Voicemail(u${ARG2}) exten => s,3,Hangup exten => s,102,Voicemail(b${ARG2}) exten => s,103,Hangup ; ; [default] ;setupdial out ; ;test dialplan exten => _9xxx,1,SayDigits(${EXTEN:1}) ; ;setup the phone extensions exten => 400,1,Macro(oneline,${FSEXT1}) exten => 401,1,Macro(oneline,${CUSTSERVE1}) exten => 402,1,Macro(oneline,${CUSTSERVE2}) exten => 410,1,Macro(oneline,${FSEXT3}) exten => 421,1,Macro(oneline,${LONDONSOLE1}) exten => 450,1,Macro(oneline,${QUAD}) exten => 451,1,Macro(oneline,${QUAD1}) exten => 452,1,Macro(oneline,${QUAD2}) ; exten => 1000,1,Macro(oneline,${CUSTSERVE}) ;exten => 2000,1,Macro(oneline,${FSSHOPS}) ;exten => 3000,1,Macro(oneline,${PRESSOFFICE}) ; [dialphone] exten => 601,1,Macro(oneline,${FAX1}) ; asterisk*CLI> reload chan_zap.so -- Reloading module 'chan_zap.so' (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf': Found [Jun 21 10:24:26] WARNING[29786]: chan_zap.c:11072 process_zap: Ignoring signalling -- Reconfigured channel 1, FXO Kewlstart signalling -- Reconfigured channel 2, FXO Kewlstart signalling -- Reconfigured channel 3, FXO Kewlstart signalling -- Reconfigured channel 4, FXO Kewlstart signalling == Parsing '/etc/asterisk/users.conf': Found -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070621/178af664/attachment.htm
Dear All I have a problem with a TDM400 card with 4 x FXS modules. The card carries extensions only and there are no incoming lines. I can make a call to the extension on this card with no problems. However, when I try and call a different extension I just get a busy signal. I also get an error message (as shown at the bottom). Is this a problem? Configs below: [root at asterisk etc]# more zaptel.conf fxoks=1-4 loadzone=uk defaultzone=uk [root at asterisk asterisk]# more zapata.conf [trunkgroups] ;define trunks here [channels] usecallerid=yes hidecallerid=no callwaiting=no threewaycalling=yes transfer=yes echocancel=yes echotraining=yes immediate=no ;define channels context=dialphone signalling=fxo_ks cidsignalling=v23 ; Added for UK CLI detection cidstart=polarity usecallerid=yes channel => 1-4 [root at asterisk asterisk]# more extensions.conf [general] static=yes writeprotect=yes ; [globals] FAX1 = Zap/1 FAX2 = Zap/2 STREAMLINE1 = Zap/3 STREAMLINE2 = Zap/4 CUSTSERVE1 = SIP/401 ;Teresa CUSTSERVE2 = SIP/402 ; Louise ;CUSTSERVE3 = SIP/404 ; Helen QUAD1 = SIP/451 ; Matt QUAD2 = SIP/452 ; Johan CUSTSERVE = CUSTSERVE1&CUSTSERVE1 ; FSEXT1 = SIP/400 ; Angela ;FSEXT2 = SIP/403 ; Nigel FSEXT3 = SIP/410 ; Matt ; ;ELLIS = SIP/411 ;QUEENS = SIP/412 ;FSSHOPS = ELLIS&QUEENS ; QUAD = SIP/450 ; LONDONSOLE1 = SIP/421 ; Zoe ;LONDONSOLE2 = SIP/422 ; Laura ;LONDONSOLE = LONDONSOLE1&LONDONSOLE2 ; ;PRESS1 = SIP/431 ; Lucy ;PRESS2 = SIP/432 ; Gemma ;PRESSOFFICE = PRESS1&PRESS2 ; [macro-oneline] exten => s,1,Dial(${ARG1},20,t) exten => s,2,Voicemail(u${MACRO_EXTEN}) exten => s,3,Hangup exten => s,102,Voicemail(b${MACRO_EXTEN}) exten => s,103,Hangup ; [macro-oneline1] exten => s,1,Dial(${ARG1},20,t) exten => s,2,Voicemail(u${ARG2}) exten => s,3,Hangup exten => s,102,Voicemail(b${ARG2}) exten => s,103,Hangup ; ; [default] ;setupdial out ; ;test dialplan exten => _9xxx,1,SayDigits(${EXTEN:1}) ; ;setup the phone extensions exten => 400,1,Macro(oneline,${FSEXT1}) exten => 401,1,Macro(oneline,${CUSTSERVE1}) exten => 402,1,Macro(oneline,${CUSTSERVE2}) exten => 410,1,Macro(oneline,${FSEXT3}) exten => 421,1,Macro(oneline,${LONDONSOLE1}) exten => 450,1,Macro(oneline,${QUAD}) exten => 451,1,Macro(oneline,${QUAD1}) exten => 452,1,Macro(oneline,${QUAD2}) ; exten => 1000,1,Macro(oneline,${CUSTSERVE}) ;exten => 2000,1,Macro(oneline,${FSSHOPS}) ;exten => 3000,1,Macro(oneline,${PRESSOFFICE}) ; [dialphone] exten => 601,1,Macro(oneline,${FAX1}) ; asterisk*CLI> reload chan_zap.so -- Reloading module 'chan_zap.so' (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf': Found [Jun 21 10:24:26] WARNING[29786]: chan_zap.c:11072 process_zap: Ignoring signalling -- Reconfigured channel 1, FXO Kewlstart signalling -- Reconfigured channel 2, FXO Kewlstart signalling -- Reconfigured channel 3, FXO Kewlstart signalling -- Reconfigured channel 4, FXO Kewlstart signalling == Parsing '/etc/asterisk/users.conf': Found -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070621/a67e311e/attachment.htm